Glycosidases of turnip leaf tissues

Four myrosinase (β-thioglucosidase EC. 3.2.3.1) and seven disaccharase (β-fructofuranosidase, EC. 3.2.1.26) isoenzymes were isolated from turnip leaves. The most active enzymes were isolated in pure form. Myrosinase and disaccharase mol wt was 62.0 × 10³ and 69.5 × 10³ dalton, respectively, on the basis of gel filtration on Sephadex G-200. Myrosinase pH profile showed high activity between pH 5 and 7 with the optimum at pH 5.5. The purified enzyme was heat-stable for 60 min at 30°C with only loss of 24% of activity. Its activity is strongly inhibited (100%) by Pb²⁺, Ba²⁺, Cu²⁺ and Ca²⁺ ions, and activated (70%) by EDTA at 0.04M. The pure enzyme failed to hydrolyze amylose, glycogen, lactose, maltose, and sucrose. TheK _m andV _max values of myrosinase using sinigrin as specific substrate was 0.045 mM and 2.5 U, respectively. The maximal activity of disaccharase enzyme was obtained at pH 4–5 and 35–37°C. The enzyme was heat-stable at 30°C for 30 min with only 10% loss of its activity. Its activity is strongly activated (70–240%) by Ca²⁺, Ba²⁺, Cu²⁺, and EDTA at 0.01M. The enzyme activity is specific to the disaccharide sucrose and failed to hydrolyze other disaccharides (maltose and lactose). TheK _m andV _max of disaccharase were 0.123 mM and 3.33 U, respectively.     

Polymer-Mercury Coated Screen-Printed Sensors for Electrochemical Stripping Analysis of Heavy Metals

In the perspective of in-field stripping analysis of heavy metals, the use and disposal of toxic mercury solutions (necessary to plate a mercury film on a carbon electrode surface) presents a problem. The aim of this work was the development of mercury coated screen-printed electrodes previously prepared in the lab and ready to use in-field. Thus some commercially available polymers like Nafion®, Eastman Kodak AQ29®, and Methocel® were investigated as mercury entrapping systems for electrochemical stripping analysis of heavy metals. Screen-printed disposable cells with a silver pseudo-reference electrode, a graphite counter electrode, and a graphite working electrode were used. To modify the sensor, the polymer solution was cast onto the carbon working electrode surface. Detection limits of 0.8 and 1 μg/L were obtained for lead and cadmium respectively. Since Methocel® based electrodes showed the best performance, they were used for the analysis of real samples. The results were compared with those obtained using a classical thin mercury film electrode and ICP spectroscopy.

All the experiments reported here were performed in un-deareated solutions as required for in-field analysis.     

Comparative Study of Surface Functionalization of Hydroxyapatite by One‐pot Grafting of Organophosphonates Species

The ability to graft apatite surface by specific ligand fields creates powerful new technology applications. Thus, grafted organophosphonate can provide an effective route to modify the surface properties of apatite materials. The ability to decorate the apatite surface with the desired functionality requires covalent attachment to solid interface; most commonly achieved using organophosphonate self‐assembly. The current study shows that various phosphonates can react with calcium ions and control the formation of the porous apatite with high surface areas as well as the porosity. The structural and surface properties are given some importance in this review.     

Some Connections Between the Classical Calogero–Moser Model and the Log-Gas

Journal of Statistical Physics - In this work we discuss connections between a one-dimensional system of N particles interacting with a repulsive inverse square potential and confined in a harmonic...     

Synthesis,structural, spectroscopic,and thermal studies of some transition-metal complexes of a ligand containing the amino mercapto triazole moiety

A new series of transition-metal complexes of Schiff base ligand containing the amino mercapto triazole moiety ( HL ) was prepared. The Schiff base and its metal complexes were elucidated by different spectroscopic techniques (infrared [IR], ¹H nuclear magnetic resonance, UV–Visible, mass, and electron spin resonance [ESR]), and magnetic moment and thermal studies. Quantum chemical calculations have been carried out to study the structure of the ligand and some of its complexes. The IR spectra showed that the ligand is chelated with the metal ion in a neutral, tridentate, and bidentate manner using NOS and NO donors in complexes 1 – 6 , 10–12 , and 7 and 8 , respectively, whereas it behaves in a monobasic tridentate fashion using NOS donor sites in copper(II) nitrate complex ( 9 ). The magnetic moment and electronic spectra data revealed octahedral and square pyramidal geometries for complexes 2 , 11 , 12 , and 5 – 8 and 10 , respectively. However, the other complexes were found to have tetrahedral ( 4 ), trigonal bipyramidal ( 1 and 3 ), and square planar ( 9 ) structures. Thermal studies revealed that the chelates with different crystallized solvents undergo different types of interactions and the decomposition pathway ended with the formation of metal oxygen (MO) and metal sulfur (MS) as final products. The ESR spectrum of copper(II) complex 10 is axial in nature with hyperfine splitting with ²B_1g as a ground state. By contrast, complexes 7 and 8 undergo distortion around the Cu(II) center, affording rhombic ESR spectra. The HL ligand and some of its complexes were screened against two bacterial species. Data showed that complex 12 demonstrated a better antibacterial activity than HL ligand and other chelates.     

First raw transition metal complexes of salicylidene and 2-hydroxy-1-naphthylidene-N-cyanoacetohydrazone

Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) complexes of salicylidene-N-cyano-acetohydrazone H2L1 and 2-hydroxy-l-naphthylidene-N-cyanoacetohydrazone H2L2 have been prepared in ethanolic solution and characterized by analytical, spectral, magnetic susceptibility, molar conductivity and TGA measurements. The analytical data show that all the complexes derived from H2L1 and H2L2 are formed in molar ratios 1M:2L, except the complexes of Mn(II), Co(II) and Cu(II) acetates of H2L2 and the complexes of Mn(II), Co(II) and Ni(II) acetates and CuCl2 of H2L1 are formed in 1:1 molar ratios. The conductance data show that all metal complexes are non-electrolytes. Electronic absorption spectra and magnetic susceptibility measurements proved that the prepared complexes have octahedral configuration except [Co(HL2)OAc] which has tetrahedral structure. The ligand field parameters were calculated for the Co(II) and Ni(II) complexes and the data show that the covalent character of the metal ligand sigma-bond is low. The ESR parameters of the Cu(II) complexes at room temperature were calculated. Thermal TGA for some solid complexes are reported.     

Structural studies and anticancer activity of a novel (N6O4) macrocyclic ligand and its Cu(II) complexes

A novel (N6O4) macrocyclic ligand (L) and its Cu(II) complexes have been prepared and characterized by elemental analysis, spectral, thermal (TG/DTG), magnetic, and conductivity measurements. Quantum chemical calculations have also been carried out at B3LYP/6-31+G(d,p) to study the structure of the ligand and one of its complexes. The results show a novel macrocyclic ligand with potential amide oxygen atom, amide and amine nitrogen atoms available for coordination. Distorted square pyramidal ([Cu(L)Cl]Cl·2.5H2O (1), [Cu(L)NO3]NO(3)·3.5H2O (2), and [Cu(L)Br]Br·3H2O (4) and octahedral ([Cu(L)(OAc)2]·5H2O (3)) geometries were proposed. The EPR data of 1, 2, and 4 indicate d1x2(-y)2 ground state of Cu(II) ion with a considerable exchange interaction. The measured cytotoxicity for L and its complexes (1, 2) against three tumor cell lines showed that coordination improves the antitumor activity of the ligand; IC50 for breast cancer cells are ≈8.5, 3, and 4 μg/mL for L and complexes (1) and (2), respectively.     

UV-vis, IR and 1H NMR spectroscopic studies of some mono- and bis-azo-compounds based on 2,7-dihydroxynaphthalene and aniline derivatives

The absorption spectra of mono- and bis-azo-derivatives obtained by coupling the diazonium salts of aromatic amines and 2,7-dihydroxynaphthalene have been studied in six organic solvents. The different absorption bands have been assigned and the effect of solvents on the charge transfer band is also discussed. The diagnostic IR spectral bands and 1H NMR signals are assigned and discussed in relation to molecular structure. Also, semi-empirical molecular orbital calculations using the atom superposition and electron delocalization molecular orbital (ASED-MO) theory have been performed to investigate the molecular and electronic structures of these compounds. According to these calculations, an intramolecular hydrogen bonding is essential for stabilization of such molecules.