Development and Validation of Stability Indicating RP-HPLC Method for the Determination of Process and Degradation-Related Impurities in Sugammadex Sodium Drug Substance

The aim of this study is to develop and validate a sensitive and specific stability-indicating reversed-phase high-performance liquid chromatographic (RP-HPLC) method for the quantitative determination of Sugammadex sodium together with its process and possible degradation impurities. The pKa value is 2.82. The chromatographic conditions have been optimized by the Hypersil Gold 250 mm X 4.6 mm, 3 µ RP-18 columns with gradient elution using a mobile phase composed of 0.1% phosphoric acid, acetonitrile, and methanol. The eluents were monitored at 205 nm with a flow rate of 1.0 mL/min with an injection volume of 20 µL. The optimized method produced symmetrical and sharp peaks with good separation between the process and degradation impurities. The forced degradation study was carried out under acid, base, oxidation, and thermal conditions to demonstrate the stability-indicating capability of the method. The method was validated as per the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) Q2 (R1) and showed excellent specificity, precision, linearity, accuracy, and robustness. The developed HPLC method was precise with a value of 0.25%. The relative standard deviation of accuracy represented by the recovery studies ranged between 89.5% and 104.6%. Linearity analyses indicated a correlation coefficient value of greater than 0.996 for Sugammadex and its known impurities. The LOD and LOQ values for Sugammadex ranged from 0.017% to 0.050%, and for its related impurities, they ranged from 0.015% to 0.055%. The stability of the analytical solution was evaluated and was stable for 75 h when stored at 5 °C. No chromatographic interference was observed during the degradation studies and also in the blank chromatogram.

     

A comparison of steady-state evoked potentials to modulated tones in awake and sleeping humans.

Steady-state evoked potential responses were measured to binaural amplitude-modulated (AM) and combined amplitude- and frequency-modulated (AM/FM) tones. For awake subjects, AM/FM tones produced larger amplitude responses than did AM tones. Awake and sleeping responses to 30-dB HL AM/FM tones were compared. Response amplitudes were lower during sleep and the extent to which they differed from awake amplitudes was dependent on both carrier and modulation frequencies. Background EEG noise at the stimulus modulation frequency was also reduced during sleep and varied with modulation frequency. A detection efficiency function was used to indicate the modulation frequencies likely to be most suitable for electrical estimation of behavioral threshold. In awake subjects, for all carrier frequencies tested, detection efficiency was highest at a modulation frequency of 45 Hz. In sleeping subjects, the modulation frequency regions of highest efficiency varied with carrier frequency. For carrier frequencies of 250 Hz, 500 Hz, and 1 kHz, the highest efficiencies were found in two modulation frequency regions centered on 45 and 90 Hz. For 2 and 4 kHz, the highest efficiencies were at modulation frequencies above 70 Hz. Sleep stage affected both response amplitude and background EEG noise in a manner that depended on modulation frequency. The results of this study suggest that, for sleeping subjects, modulation frequencies above 70 Hz may be best when using steady-state potentials for hearing threshold estimation.     

Zur Bestimmung von Acetyl, besonders in Sauerstoff-Acetylverbindungen

Ohne Zusammenfassung     

Phase shift moiré studies of processing-induced residual strains in Nickel 200 spot welds

Processing-induced residual strains in solid cylinders of Nickel 200 were investigated using phase shifting moiré interferometry. Two different experimental approaches were used to study the strains produced during Tungsten-inert gas spot welding. A comparison of results for a ‘hot/fast’ and a ‘cool/slow’ weld demonstrate the capabilities of the general approach. Both experimental methods revealed distinct differences in the residual displacement and strain fields between the two types of welds.