Oxofluorovanadates(V). IV. Dioxotetrafluorovanadates

Preparation and properties of the salts of the series MVO₂F₄, where M = NH, Na⁺, K⁺, 1/2 Ni²⁺, and 1/3 [Co(NH₃)₆]³⁺ are described. Molecular conductivity of Na₃VO₂F₄ at different dilutions indicates that Na₃VO₂F₄ dissociates into 3 Na⁺ and VOaF ions. Ion exchange study of (NH₄)₃VO₂F₄ solution through cation exchange resin (H⁺ form) suggests that the corresponding acid decomposes partly to vanadium pentoxide. Reaction between (NH₄)₃VO₂F₄ with BaCl₂ and AgNO₃ solutions shows the formation of BaVO₂F₃ and AgVO₃ respectively. Thermogravimetric study of (NH₄)₃VO₂F₄ shows the formation of impure vanadium pentoxide as the ultimate product on heating up to 450°C. X-ray powder diffraction data are given for (NH₄)₃VO₂F₄ and Na₃VO₂F₄.     

The microwave spectrum and structure of trifluoro-ethylene

The microwave spectrum of trifluoroethylene F₂C=CHF is reported, and a number of ground state and vibrationally excited state lines are assigned. The ground state rotational constants are: 10665.31, 3872.36, 2837.97 MHz. The dipole components are μ_a = 0.075 D, μ_b = 1.30 D, and μ_total = 1.30 D. Calculations of the inertia defect of the ground and excited states indicate that the equilibrium configuration is planar.     

Mesoporous Core–Shell Fenton Nanocatalyst: A Mild,Operationally Simple Approach to the Synthesis of Adipic Acid

Mesoporous nanoparticles composed of γ‐Al₂O₃ cores and α‐Fe₂O₃ shells were synthesized in aqueous medium. The surface charge of γ‐Al₂O₃ helps to form the core–shell nanocrystals. The core–shell structure and formation mechanism have been investigated by wide‐angle XRD, energy‐dispersive X‐ray spectroscopy, and elemental mapping by ultrahigh‐resolution (UHR) TEM and X‐ray photoelectron spectroscopy. The N₂ adsorption–desorption isotherm of this core–shell materials, which is of type IV, is characteristic of a mesoporous material having a BET surface area of 385 m² g^?1 and an average pore size of about 3.2 nm. The SEM images revealed that the mesoporosity in this core–shell material is due to self‐aggregation of tiny spherical nanocrystals with sizes of about 15–20 nm. Diffuse‐reflectance UV/Vis spectra, elemental mapping by UHRTEM, and wide‐angle XRD patterns indicate that the materials are composed of aluminum oxide cores and iron oxide shells. These Al₂O₃@Fe₂O₃ core–shell nanoparticles act as a heterogeneous Fenton nanocatalyst in the presence of hydrogen peroxide, and show high catalytic efficiency for the one‐pot conversion of cyclohexanone to adipic acid in water. The heterogeneous nature of the catalyst was confirmed by a hot filtration test and analysis of the reaction mixture by atomic absorption spectroscopy. The kinetics of the reaction was monitored by gas chromatography and ¹H NMR spectroscopy. The new core–shell catalyst remained in a separate solid phase, which could easily be removed from the reaction mixture by simple filtration and the catalyst reused efficiently.     

Photophysical characterization of imidazolium-substituted Pd(II), In(III), and Zn(II) porphyrins as photosensitizers for photodynamic therapy

The photophysical properties of four imidazolium-substituted metalloporphyrins have been assessed to gain insights into the relative efficacy of the compounds for photodynamic therapy (PDT). A set of zinc(II), palladium(II), and chloro-indium(III) porphyrins all bear a net positive charge owing to the diethylimidazolium unit; one zinc chelate bears a negative charge owing to a bis(sulfobutyl)imidazolium unit. The photophysical properties of the cationic and anionic zinc porphyrins are very similar to one another in organic solvents, phosphate-buffered saline, and in the presence of bovine serum albumin. The properties of the zinc and palladium porphyrins bearing charged peripheral groups are generally similar to those of neutral analogs in organic solvents. The palladium porphyrin shows an essentially quantitative yield (≥0.99) of the triplet excited state compared to the zinc porphyrins (0.9), and all are quantitatively quenched (at the diffusion limit) by molecular oxygen in air-saturated fluid solution. If the rate constant and yield of quenching of the triplet excited state by energy or electron transfer to molecular oxygen is the same in the cellular environment as in solution, then these processes combined with the triplet yield contribute only a factor of 1.3 to the higher PDT activity of analogous palladium versus zinc porphyrins, which is much smaller than what is observed. Therefore, other factors such as transient reduction of the excited porphyrin or delivery to the target site must predominantly underlie the difference in PDT efficacy of these sensitizers.     

LC–MS Simultaneous Determination of Itopride Hydrochloride and Domperidone in Human Plasma

A rapid, simple, sensitive and specific liquid chromatography–tandem mass spectrometry method was developed and validated for simultaneous quantification of itopride hydrochloride and domperidone in human plasma. Both drugs were extracted by liquid–liquid extraction with ethyl acetate and saturated borax solution. The chromatographic separation was performed on a reversed-phase C18 column with a mobile phase of water–methanol (2:98, v/v) containing 0.5% formic acid. The protonated analyte was quantitated in positive ionization by multiple reaction monitoring with a mass spectrometer. The assay exhibited linearity over the concentration range of 3.33–500 ng mL^?1 for itopride hydrochloride and 3.33–100 ng mL^?1 for domperidone in human plasma. The precursor to product ion transitions of m/z 359.1–72.3 and 426.0–147.2 were used to measure itopride hydrochloride and domperidone respectively. The method was found suitable for the analysis of plasma samples collected during phase 1 pharmacokinetics study of itopride HCl 50 mg and domperidone 20 mg in 12 healthy volunteers after single oral doses of the combination drug.     

Development and validation of an LC-ESI-MS/MS method for simultaneous quantitation of olmesartan and pioglitazone in rat plasma and its pharmacokinetic application

A simple, high‐throughput and specific high‐performance liquid chromatography tandem mass spectrometry method has been developed and validated according to the FDA guidelines for simultaneous quantification of olmesartan and pioglitazone in rat plasma. The bioanalytical method consists of liquid–liquid extraction and quantitation by triple quadrupole mass spectrometry using electrospray ionization technique, operating in multiple reaction monitoring and positive ion modes. The compounds were eluted isocratically on a C₁₈ column with a mobile phase consisting of a mixture of methanol and water (containing 0.5% formic acid) in a ratio of 9:1. The response to olmesartan and pioglitazone was linear over the range 0.01–10 µg/mL. The validation results demonstrated that the method had satisfactory precision and accuracy across the calibration range. Intra‐ and inter‐day precisions ranged from 0.66 to 3.32 and from 0.94 to 2.93% (%CV), respectively. The accuracy determined at three quality control levels was within 91.27–107.28%. There was no evidence of instability of the analytes in rat plasma following the stability studies. The method proved highly reproducible and sensitive and was successfully applied in a pharmacokinetic study after single dose oral administration of olmesartan and pioglitazone to the rat. Copyright © 2010 John Wiley & Sons, Ltd.     

Two-dimensional supramolecular assembly of phenylmercury(II) and cadmium(II) complexes with a tridentate thiohydrazone NNS donor ligand: Synthesis,coordination behavior and crystal structure

The reaction of phenylmercury(II) acetate and cadmium(II) acetate with a refluxed solution of diacetylmonoxime and morpholine N-thiohydrazide formed a novel phenylmercury(II) complex, [PhHg(Hdammthiol)] (1) and a cadmium(II) complex, [Cd(Hdammthiol)₂] (2), respectively (where H₂dammthiol is the thiol form of diacetylmonoximemorpholine N-thiohydrazone (Hdammth) formed by the condensation of diacetylmonoxime and morpholine N-thiohydrazide in the presence of phenylmercury(II) and cadmium(II) ions). The complexes were characterised by elemental analyses and spectral data (electronic, infrared and ¹H NMR) and also by X-ray crystal structure analysis. The X-ray crystallography shows that the phenylmercury(II) complex attained a tricoordinated distorted T-shaped structure, while the cadmium(II) complex attained a trapezoidal bipyramidal geometry. The phenylmercury(II) complex forms a two-dimensional sheet via C–H?O and O–H?N hydrogen bonding and also forms a two-dimensional supramolecular dimer, having C–H?π synthons. Intermolecular C–H?O and O–H?O hydrogen bonding of the cadmium(II) complex forms a two-dimensional supramolecular sheet along the bc plane and posses an impressively short intermolecular C(sp³)?O(sp³) contact.     

Organic–Inorganic Hybrid Supermicroporous Iron(III) Phosphonate Nanoparticles as an Efficient Catalyst for the Synthesis of Biofuels

Here we report a novel family of crystalline, supermicroporous iron(III) phosphonate nanomaterials (HFeP‐1‐3, HFeP‐1‐2, and HFeP‐1‐4) with different Fe^III‐to‐organophosphonate ligand mole ratios. The materials were synthesized by using a hydrothermal reaction between benzene‐1,3,5‐triphosphonic acid and iron(III) chloride under acidic conditions (pH≈4.0). Powder X‐ray diffraction, N₂ sorption, transmission and scanning electron microscopy (TEM and SEM) image analysis, thermogravimetric and differential thermal analysis (TGA‐DTA), and FTIR spectroscopic tools were used to characterize the materials. The triclinic crystal phase [P$\bar 1$ (2) space group] of the hybrid iron phosphonate was established by a Rietveld refinement of the PXRD analysis of HFeP‐1‐3 by using the MAUD program. The unit cell parameters are a=8.749(1), b=8.578(1), c=17.725(3) Å; α=104.47(3), β=97.64(1), γ=113.56(3)°; and V=1013.41 ų. With these crystal parameters, we proposed an 24‐membered‐ring open framework structure for HFeP‐1. Compound HFeP‐1‐3, with an starting Fe/ligand molar ratio of 3.0, shows the highest Brunauer–Emmett–Telller (BET) surface area of 556 m²g^?1 and uniform supermicropores of approximately 1.1 nm. The acidic surface of the porous iron(III) phosphonate nanoparticles was used in a highly efficient and recyclable catalytic transesterification reaction for the synthesis of biofuels under mild reaction conditions.     

Recent advances of lead-free metal halide perovskite single crystals and nanocrystals: synthesis,crystal structure,optical properties,and their diverse applications

Lead halide hybrid perovskites have received massive research attention because of their unique inherent photophysical properties that driven them for potential application in the fields of photovoltaics, light-emitting devices, lasing, X-ray detector, and so on. Perovskite single crystals and nanocrystals are generally synthesized via various low-cost solution-processed techniques. The emergence of simple growth approaches of perovskite structures enable to fabricate low-cost and highly efficient devices. However, toxicity of Pb atoms and instability of perovskite structures obstruct further commercialization of these technologies. Recent efforts have been shifted to discover novel, eco-friendly, and stable lead-free metal halide perovskite (LFHP) materials and exploring their different growth processes for various device applications. This review aims to provide an up-to-date analysis of recent progress report on LFHPs and will mainly focus on their growth processes in the single crystalline and nanocrystalline forms. This review also tries to understand how the perovskite crystal structure impacts on their fundamental properties. In addition, we discuss the current progress in various field of applications and their future aspects.