A paper-based resonance energy transfer nucleic acid hybridization assay using upconversion nanoparticles as donors and quantum dots as acceptors

Monodisperse aqueous upconverting nanoparticles (UCNPs) were covalently immobilized on aldehyde modified cellulose paper via reduction amination to develop a luminescence resonance energy transfer (LRET)-based nucleic acid hybridization assay. This first account of covalent immobilization of UCNPs on paper for a bioassay reports an optically responsive method that is sensitive, reproducible and robust. The immobilized UCNPs were decorated with oligonucleotide probes to capture HPRT1 housekeeping gene fragments, which in turn brought reporter conjugated quantum dots (QDs) in close proximity to the UCNPs for LRET. This sandwich assay could detect unlabeled oligonucleotide target, and had a limit of detection of 13 fmol and a dynamic range spanning nearly 3 orders of magnitude. The use of QDs, which are excellent LRET acceptors, demonstrated improved sensitivity, limit of detection, dynamic range and selectivity compared to similar assays that have used molecular fluorophores as acceptors. The selectivity of the assay was attributed to the decoration of the QDs with polyethylene glycol to eliminate non-specific adsorption. The kinetics of hybridization were determined to be diffusion limited and full signal development occurred within 3 min.     

Students’ conceptual understanding of a function and its derivative in an experimental calculus course

Calculus has been witnessing fundamental changes in its curriculum, with an increased emphasis on visualization. This mode for representing mathematical concepts is gaining more strength due to the advances in computer technology and the development of dynamical mathematical software. This paper focuses on the understanding of the function and its derivative as viewed by students of a reformed Calculus 1 course offered in two experimental sections at the Lebanese American University in Beirut, Lebanon. Results have shown that the general approach adopted in the course proved to be unpopular for a great majority of the students, but rewarding for others. Interviews conducted with some students and a study of their performance on very specific exam questions reveal that for most students, the algebraic representation of a function still dominated their thinking; however, these students showed an almost complete understanding of the derivative, particularly the idea of the instantaneous rate of change and/or the slope of a curve at a given point. Furthermore, very few of these students referred to the mechanical methods for finding derivatives.     

New many fold 1,2,3‐selenadiazole aromatic derivatives

The many fold aromatic ketones 2a‐d are versatile compounds for the synthesis of the many fold 1,2,3‐selenadiazole aromatic derivatives 5a‐d . The preparation starts with the reaction between the many fold bromomethylene benzene derivatives 1a‐d and 4‐hydroxyacetophenone, which are transformed through the reaction with semicarbazide hydrochloride or ethylhydrazine carboxylate into the corresponding semicarbazones derivatives 3a‐d or hydrazones 4a‐d . The reaction with selenium dioxide leads to regiospecific ring closure of semicarbazones or hydrazones to give the many fold 1,2,3‐selenadiazole aromatic derivatives in high yield.     

Simple methods for the direct assembly, functionalization, and patterning of acid-terminated monolayers on Si111

This article describes mild methods to directly assemble, functionalize, and pattern monolayers of undecylenic acid on hydrogen-terminated Si(111). These monolayers were assembled under very mild conditions from a neat solution of undecylenic acid containing 0.1 mol % 4-(decanoate)-2,2,6,6-tetramethylpiperidinooxy at room temperature without the need for UV light. Because of these mild conditions, monolayers exposing carboxylic acids could be assembled in one step without the need to protect the acid prior to its assembly. The monolayers were extensively characterized by horizontal attenuated total reflection infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), and contact angle goniometry. The monolayers bonded to the silicon surface preferentially through the olefin with no detectable bonds between the carboxylic acids and silicon. The crystallinity of the monolayer was studied by infrared spectroscopy through the antisymmetric--v(a)(CH(2))--and symmetric--v(s)(CH(2))--stretches for methylene. Because it is important for future applications to assemble functional surfaces, methods to react the acid-terminated monolayers with trifluoroacetic anhydride and triethylamine to yield a symmetric anhydride on the monolayer were studied. These anhydrides were reacted with a variety of milligram-quantity amines to yield amide-terminated surfaces. This method was general, and a variety of amines could be bonded to the monolayer. The stabilities of these monolayers upon exposure to ambient conditions and under a variety of solvents were described. Because patterned monolayers have found wide applications, we have developed methods to pattern 1-octadecylamine and poly(ethylenimine) on the micrometer scale using soft lithography. In addition, polymer brushes of polynorbornene with thicknesses from 32 to 150 nm were grown from monolayers patterned with the Grubbs' catalyst. The patterned surfaces were imaged by scanning electron microscopy, scanning probe microscopy, and ellipsometry to determine the thicknesses of the patterns and the fidelity of the method.     

Oxidation of isobutane catalyzed by vanadyl, copper and cesium substituted H3PMo12O40

Effects of Cs⁺, H⁺ and Cu²⁺ counterions in the vanadium containing heteropoly compounds Cs_xH_1-xVO[PMo₁₂O₄₀] and Cs_yH_0.5-yCu_0.25VO[PMo₁₂O₄₀] on the catalytic oxidation of isobutane and characterization by TGA, IR and ESR spectroscopies are reported. A high selectivity of 76% for methacrylic acid and methacrolein together has been obtained with Cs_0.75H_0.25VO[PMo₁₂O₄₀] catalysts at a reactivity of 5.3x10^-1 mmol/h cm³.     

Studies on accelerated sulphur vulcanization of natural rubber using 1-phenyl-2, 4-dithiobiuret/tertiary butyl benzothiazole sulphenamide

The use of binary accelerators has gained tremendous importance since it increases the production rate of the article made of that elastomer. The authors have analyzed the performance of a novel binary accelerator system in the sulphur vulcanization of natural rubber (NR). The vulcanizates resulting from the binary accelerated process obtained good mechanical properties, ageing and swelling resistance. Network characterization of the mixes was done using swelling measurements, stress-strain analysis etc. The chain entanglement density was measured using dynamic mechanical analysis. However the performance is found to be dependent on the relative proportion of mono, di and polysulphidic linkages in the material. The result of the study points out that the proposed system can be active in NR regardless of the vulcanization recipe and temperature. The performance of the new binary system in filled vulcanizates is also studied. Based on the processing, mechanical and chemical characterization an optimum concentration is suggested for the new system.     

Spectroscopic characterization of alkaline earth uranyl carbonates

A series of alkaline uranyl carbonates, M[UO₂(CO₃)₃]·nH₂O (M=Mg₂, Ca₂, Sr₂, Ba₂, Na₂Ca, and CaMg) was synthesized and characterized by inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectrometry (AAS) after nitric acid digestion, X-ray powder diffraction (XRD), and thermal analysis (TGA/DTA). The molecular structure of these compounds was characterized by extended X-ray absorption fine-structure (EXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS). Crystalline Ba₂[UO₂(CO₃)₃]·6H₂O was obtained for the first time. The EXAFS analysis showed that this compound consists of (UO₂)(CO₃)₃ clusters similar to the other alkaline earth uranyl carbonates. The average U-Ba distance is 3.90±0.02 Å.Fluorescence wavelengths and life times were measured using time-resolved laser-induced fluorescence spectroscopy (TRLFS). The U-O bond distances determined by EXAFS, TRLFS, XPS, and Raman spectroscopy agree within the experimental uncertainties. The spectroscopic signatures observed could be useful for identifying uranyl carbonate species adsorbed on mineral surfaces.     

Deposition of ZnS thin film by ultrasonic spray pyrolysis: effect of thickness on the crystallographic and electrical properties

Zinc sulfide (ZnS) thin films have been deposited on Si (1 0 0) substrate using ultrasonic spray pyrolysis. X-ray diffraction (XRD) analysis revealed that the films are (0 0 2) preferentially oriented with c-axis-oriented wurtzite structure. The crystallinity has been found to improve with film thickness in the 180–6000 nm range. Film structure has been analyzed by XRD, scanning electron microscope, FTIR, and Raman spectroscopies, while the stoichiometry has been verified by energy-dispersive spectroscopy and particle-induced X-ray emission techniques. Electrical properties of the grown films were characterized by current–voltage and capacitance–voltage measurements where, the films show better conducting behavior at higher thickness.     

New Numerical Approach for Fractional Variational Problems Using Shifted Legendre Orthonormal Polynomials

This paper reports a new numerical approach for numerically solving types of fractional variational problems. In our approach, we use the fractional integrals operational matrix, described in the sense of Riemann–Liouville, with the help of the Lagrange multiplier technique for converting the fractional variational problem into an easier problem that consisting of solving an algebraic equations system in the unknown coefficients. Several numerical examples are introduced, combined with their approximate solutions and comparisons with other numerical approaches, for confirming the accuracy and applicability of the proposed approach.     

Electroanalysis of single-nucleotide polymorphism by hairpin DNA architectures

Genetic analysis of infectious and genetic diseases and cancer diagnostics require the development of efficient tools for fast and reliable analysis of single-nucleotide polymorphism (SNP) in targeted DNA and RNA sequences often responsible for signalling disease onset. Here, we highlight the main trends in the development of electrochemical genosensors for sensitive and selective detection of SNP that are based on hairpin DNA architectures exhibiting better SNP recognition properties compared with linear DNA probes. SNP detection by electrochemical hairpin DNA beacons is discussed, and comparative analysis of the existing SNP sensing strategies based on enzymatic and nanoparticle signal amplification schemes is presented.