Bethe-Salpeter equation for non-self conjugate mesons in a power-law potential

We develop an approach to the solution of the spinless Bethe-Salpeter equation for the different-mass case. Although the calculations are developed for spinzero particles in any arbitratry spherically symmetric potential, the non-Coulombic effective power-law potential is used as a kernel to produce the spin-averaged bound states of the non-self-conjugate mesons. The analytical formulas are also applicable to the self-conjugate mesons in the equal-mass case. The flavor-independent case is investigated in this work. The calculations are carried out to the third-order correction of the energy series. Results are consistent with those obtained before.     

Products active on mosquitoes,IV: Synthesis and biological activity of 8-propargyloxy-3,7-dimethyl-2,6-octadienyl/6-octenyl ethers

Summary A series of 8-proparglyoxy-3,7-dimethyl-2,6-octadienyl and 8-propargyloxy-3,7-dimethyl-6-octenyl ethers were prepared from 8-hydroxygeranyl and 8-hydroxycitronellyl ethers, respectively. Almost all compounds showed high toxicity toCulex quinquefaciatus larvae at 1 mgl^–1 dose level.

---

Gegen Mücken aktive Produkte, 4. Mitt.: Synthese und biologische Aktivität von 8-Propargyloxy-3,7-dimethyl-2,6-octadienyl/6-octenyl-ethern

Zusammenfassung Eine Reihe von 8-Propargyloxy-3,7-dimethyl-2,6-octadienyl- und 8-propargyloxy-3,7-dimethyl-6-octenyl-ethern wurden aus 8-Hydroxygeranyl- bzw. 8-Hydroxycitronellyl-ethern hergestellt. Fast alle Verbindungen zeigten hoch Toxizität gegenüber Larven vonCulex quinquefaciatus in einer Dosierung von 1 mgl^–1.

     

An investigation of the properties of poly(dimethylsiloxane)-bioinspired silica hybrids

Elastomers typically require the incorporation of reinforcing fillers in order to improve their mechanical properties. For commercial silicone systems silica and titania are typically used as fillers. Fumed and precipitated silica are made on an industrial scale for many applications; however, we have shown recently that biological and synthetic macromolecules can generate new silica structures using a bioinspired route. Herein we have incorporated bioinspired silica fillers into poly(dimethylsiloxane) (PDMS) elastomers and investigated their mechanical, morphological and thermal properties as a function of filler loading. The equilibrium stress-strain characteristics of the PDMS-bioinspired silica hybrids were determined as a function of bioinspired filler loading and the Mooney-Rivlin constants (2C₁ and 2C₂) were calculated. The thermal characteristics, in particular glass transition temperatures (T_g) and melting points (T_m), of the PDMS-bioinspired silica hybrids were characterized using differential scanning calorimetry (DSC). The thermal stability of these hybrid materials were investigated using thermogravimetric analysis (TGA). The morphology of the samples was characterized using scanning electron microscopy (SEM), and the filler dispersion was characterized using ultra small angle X-ray scattering (USAXS) and scanning electron microscopy (SEM). Although spherical silica particles were used here, we have demonstrated elsewhere that this bioinspired synthetic route also enables highly asymmetric silica structures to be prepared such as fibres and sheets. This methodology therefore offers the interesting possibility of preparing new hybrid systems where the properties are highly anisotropic.     

Solution-based chemical synthesis of boehmite nanofibers and alumina nanorods

This article reports an easy chemical method of synthesizing boehmite nanofibers by a modified sol-gel process involving aluminum isopropoxide precursor. Nanorods of gamma-alumina have been successfully prepared after dehydration of the viscous sol at 600 degrees C for 4 h in air. The boehmite nanofibers and gamma-alumina nanorods were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy for surface chemistry and functional groups, scanning electron microscopy, high-resolution transmission electron microscopy with selected area electron diffraction, and energy-dispersed spectroscopy for morphology and structure identification. The length of the boehmite nanofibers was found to be more than 10 mum with a crystalline lattice structure. The mechanism of formation of the boehmite nanofibers included the preferential growth along the longitudinal axis due to interaction between the solvent molecules and the surface OH- groups of hydrogen bonds. It is also suggested that the boehmite nanofibers may have formed due to the inherent instability of the planar structure of the boehmite lattice. The diameter of the gamma-alumina nanorods was found to be less than 10 nm with a varying length in the range of 50-200 nm. Boehmite to gamma-Al2O3 transformation was attributed to the loss of water molecules by internal condensation of protons and hydroxyl ions.     

Investigations into the parallel kinetic resolution of 2-phenylpropanoyl chloride using quasi-enantiomeric oxazolidinones

The resolution of 2-phenylpropanoyl chloride using an equimolar combination of quasi-enantiomeric oxazolidinones is discussed. The levels of diastereoselectivity were found to be dependent upon the structural nature of the metallated oxazolidinone, temperature and metal counter-ion.     

Modification of the resistance of two epoxy resins to accelerated weathering using calcium sulfate as a photostabilizer

Epoxy-timber composites have received increasing attention during the last decades because there are many advantages related to their uses as construction materials in applications such as timber bridges. However, the durability of epoxy-timber composites under outdoor conditions has become a concern for many epoxy resins. This study evaluated the chemical, thermal, and mechanical properties of two cured epoxies, the product of the diglycidyl ether of bisphenol A with 2,4-trimethyl-1,6-hexanediamine (DGEBA-TMDA) and the analogous resin prepared with the hydrogenated diglycidyl ether of bisphenol A (HDGEBA-TMDA), each mixed with 2?wt. % calcium sulfate (CS). We hypothesized that the use of CS, as an inorganic UV absorber, could decrease undesirable effects arising from exposure to UV light, moisture, and extreme temperatures.

An accelerated aging chamber simulated natural weathering for 1, 2, 3, 4, and 6?months. Chemical changes in cured epoxy systems over time in the presence and absence of CS fillers were determined using Fourier transform infrared spectroscopy (FT-IR). Thermal degradation profiles before and after exposure to accelerated weathering were followed by thermogravimetric analysis (TGA). The glass transition temperatures (T_g) before and after accelerated weathering were measured, and the effect of accelerated weathering on the surface morphology of the epoxy systems was investigated by scanning electron microscopy (SEM). In the presence of CS, after 6?months accelerated weathering the tensile strength of DGEBA-TMDA reduced by 23.8?±?2.4%, compared to 46.5?±?5.5% in its absence, while the corresponding values for HDGEBA-TMDA were 21.4?±?2.1% and 28.7?±?1.8%.     

P(i-BuNCH2CH2)3N: an efficient promoter for the nucleophilic aromatic substitution reaction of aryl fluorides with aryl TBDMS (or TMS) ethers

[reaction: see text]. The nucleophilic aromatic substitution reaction between electron-deficient aryl fluorides and aryl TBDMS (or TMS) ethers has been shown to be efficiently promoted by proazaphosphatranes such as P(i-BuNCH(2)CH(2))(3)N (3). Excellent yields of diaryl ether products were obtained under unusually mild conditions.     

A theoretical study of aqueous solvation of K comparing ab initio, polarizable, and fixed-charge models

The hydration of K(+) is studied using a hierarchy of theoretical approaches, including ab initio Born-Oppenheimer molecular dynamics and Car-Parrinello molecular dynamics, a polarizable force field model based on classical Drude oscillators, and a nonpolarizable fixed-charge potential based on the TIP3P water model. While models based more directly on quantum mechanics offer the possibility to account for complex electronic effects, polarizable and fixed-charges force fields allow for simulations of large systems and the calculation of thermodynamic observables with relatively modest computational costs. A particular emphasis is placed on investigating the sensitivity of the polarizable model to reproduce key aspects of aqueous K(+), such as the coordination structure, the bulk hydration free energy, and the self diffusion of K(+). It is generally found that, while the simple functional form of the polarizable Drude model imposes some restrictions on the range of properties that can simultaneously be fitted, the resulting hydration structure for aqueous K(+) agrees well with experiment and with more sophisticated computational models. A counterintuitive result, seen in Car-Parrinello molecular dynamics and in simulations with the Drude polarizable force field, is that the average induced molecular dipole of the water molecules within the first hydration shell around K(+) is slightly smaller than the corresponding value in the bulk. In final analysis, the perspective of K(+) hydration emerging from the various computational models is broadly consistent with experimental data, though at a finer level there remain a number of issues that should be resolved to further our ability in modeling ion hydration accurately.     

Sensitive and selective spectrophotometric methods for the determination of pheniramine maleate in bulk drug and in its formulations using sodium hypochlorite

Two simple, selective and sensitive spectrophotometric methods are described for the determination of pheniramine maleate (PAM) in pure and dosage forms. The method is based on the reaction of PAM with hypochlorite in the presence of Kolthoff buffer (phosphate-borate) of pH 7.0 to form the chloro derivative of PAM, destruction of the excess hypochlorite by nitrite ion (the chloro derivative of drug is unaffected under the optimized conditions) followed by the oxidation of iodide with the chloro derivative of PAM to iodine (I ₃ ^? which is either measured directly at 355 (method A) or reacted with starch to form a blue chromogen measurable at 590 nm (method B). The optimum conditions that affect the reaction were ascertained, and under these conditions linear relationship was obtained in the concentration ranges of 2–50 and 1–25 μg/mL PAM in methods A and B, respectively. The calculated molar absorptivity values are 7.26 × 10³ and 1.28 × 10⁴ L/(mol cm) for method A and method B, respectively. Sandell’s sensitivity values, limits of detection (LOD) and quantification (LOQ) are calculated as per ICH guidelines. The proposed methods were applied successfully to the determination of PAM in tablets and injection with good accuracy and precision and without interferences from common additives. The results obtained by the proposed methods were compared favourably with those of the reference method. The accuracy and reliability of the proposed methods were further checked by recovery studies via standard addition procedure.     

SO4 2−/SnO2: Efficient,Chemoselective, and Reusable Catalyst for Acylation of Alcohols,Phenols, and Amines at Room Temperature

Abstract

SO₄ ^2?/SnO₂ was employed for the acylation of a variety of alcohols, phenols, and amines under solvent‐free conditions at room temperature. This method showed preferential selectivity for acetylation of the amino group in the presence of a hydroxyl group. The reported method is simple, mild, and environmentally viable, using several other acid anhydrides at room temperature.