Bethe-Salpeter equation for non-self conjugate mesons in a power-law potential

We develop an approach to the solution of the spinless Bethe-Salpeter equation for the different-mass case. Although the calculations are developed for spinzero particles in any arbitratry spherically symmetric potential, the non-Coulombic effective power-law potential is used as a kernel to produce the spin-averaged bound states of the non-self-conjugate mesons. The analytical formulas are also applicable to the self-conjugate mesons in the equal-mass case. The flavor-independent case is investigated in this work. The calculations are carried out to the third-order correction of the energy series. Results are consistent with those obtained before.     

Solution-based chemical synthesis of boehmite nanofibers and alumina nanorods

This article reports an easy chemical method of synthesizing boehmite nanofibers by a modified sol-gel process involving aluminum isopropoxide precursor. Nanorods of gamma-alumina have been successfully prepared after dehydration of the viscous sol at 600 degrees C for 4 h in air. The boehmite nanofibers and gamma-alumina nanorods were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy for surface chemistry and functional groups, scanning electron microscopy, high-resolution transmission electron microscopy with selected area electron diffraction, and energy-dispersed spectroscopy for morphology and structure identification. The length of the boehmite nanofibers was found to be more than 10 mum with a crystalline lattice structure. The mechanism of formation of the boehmite nanofibers included the preferential growth along the longitudinal axis due to interaction between the solvent molecules and the surface OH- groups of hydrogen bonds. It is also suggested that the boehmite nanofibers may have formed due to the inherent instability of the planar structure of the boehmite lattice. The diameter of the gamma-alumina nanorods was found to be less than 10 nm with a varying length in the range of 50-200 nm. Boehmite to gamma-Al2O3 transformation was attributed to the loss of water molecules by internal condensation of protons and hydroxyl ions.     

Investigations into the parallel kinetic resolution of 2-phenylpropanoyl chloride using quasi-enantiomeric oxazolidinones

The resolution of 2-phenylpropanoyl chloride using an equimolar combination of quasi-enantiomeric oxazolidinones is discussed. The levels of diastereoselectivity were found to be dependent upon the structural nature of the metallated oxazolidinone, temperature and metal counter-ion.     

Modification of the resistance of two epoxy resins to accelerated weathering using calcium sulfate as a photostabilizer

Epoxy-timber composites have received increasing attention during the last decades because there are many advantages related to their uses as construction materials in applications such as timber bridges. However, the durability of epoxy-timber composites under outdoor conditions has become a concern for many epoxy resins. This study evaluated the chemical, thermal, and mechanical properties of two cured epoxies, the product of the diglycidyl ether of bisphenol A with 2,4-trimethyl-1,6-hexanediamine (DGEBA-TMDA) and the analogous resin prepared with the hydrogenated diglycidyl ether of bisphenol A (HDGEBA-TMDA), each mixed with 2?wt. % calcium sulfate (CS). We hypothesized that the use of CS, as an inorganic UV absorber, could decrease undesirable effects arising from exposure to UV light, moisture, and extreme temperatures.

An accelerated aging chamber simulated natural weathering for 1, 2, 3, 4, and 6?months. Chemical changes in cured epoxy systems over time in the presence and absence of CS fillers were determined using Fourier transform infrared spectroscopy (FT-IR). Thermal degradation profiles before and after exposure to accelerated weathering were followed by thermogravimetric analysis (TGA). The glass transition temperatures (T_g) before and after accelerated weathering were measured, and the effect of accelerated weathering on the surface morphology of the epoxy systems was investigated by scanning electron microscopy (SEM). In the presence of CS, after 6?months accelerated weathering the tensile strength of DGEBA-TMDA reduced by 23.8?±?2.4%, compared to 46.5?±?5.5% in its absence, while the corresponding values for HDGEBA-TMDA were 21.4?±?2.1% and 28.7?±?1.8%.     

P(i-BuNCH2CH2)3N: an efficient promoter for the nucleophilic aromatic substitution reaction of aryl fluorides with aryl TBDMS (or TMS) ethers

[reaction: see text]. The nucleophilic aromatic substitution reaction between electron-deficient aryl fluorides and aryl TBDMS (or TMS) ethers has been shown to be efficiently promoted by proazaphosphatranes such as P(i-BuNCH(2)CH(2))(3)N (3). Excellent yields of diaryl ether products were obtained under unusually mild conditions.     

Solubility Optimization of Loxoprofen as a Nonsteroidal Anti-Inflammatory Drug: Statistical Modeling and Optimization

Industrial-based application of supercritical CO₂ (SCCO₂) has emerged as a promising technology in numerous scientific fields due to offering brilliant advantages, such as simplicity of application, eco-friendliness, and high performance. Loxoprofen sodium (chemical formula C₁₅H₁₈O₃) is known as an efficient nonsteroidal anti-inflammatory drug (NSAID), which has been long propounded as an effective alleviator for various painful disorders like musculoskeletal conditions. Although experimental research plays an important role in obtaining drug solubility in SCCO₂, the emergence of operational disadvantages such as high cost and long-time process duration has motivated the researchers to develop mathematical models based on artificial intelligence (AI) to predict this important parameter. Three distinct models have been used on the data in this work, all of which were based on decision trees: K-nearest neighbors (KNN), NU support vector machine (NU-SVR), and Gaussian process regression (GPR). The data set has two input characteristics, P (pressure) and T (temperature), and a single output, Y = solubility. After implementing and fine-tuning to the hyperparameters of these ensemble models, their performance has been evaluated using a variety of measures. The R-squared scores of all three models are greater than 0.9, however, the RMSE error rates are 1.879 × 10⁻⁴, 7.814 × 10⁻⁵, and 1.664 × 10⁻⁴ for the KNN, NU-SVR, and GPR models, respectively. MAE metrics of 1.116 × 10⁻⁴, 6.197 × 10⁻⁵, and 8.777 × 10⁻⁵errors were also discovered for the KNN, NU-SVR, and GPR models, respectively. A study was also carried out to determine the best quantity of solubility, which can be referred to as the (x₁ = 40.0, x₂ = 338.0, Y = 1.27 × 10⁻³) vector.     

Sensitive and selective spectrophotometric methods for the determination of pheniramine maleate in bulk drug and in its formulations using sodium hypochlorite

Two simple, selective and sensitive spectrophotometric methods are described for the determination of pheniramine maleate (PAM) in pure and dosage forms. The method is based on the reaction of PAM with hypochlorite in the presence of Kolthoff buffer (phosphate-borate) of pH 7.0 to form the chloro derivative of PAM, destruction of the excess hypochlorite by nitrite ion (the chloro derivative of drug is unaffected under the optimized conditions) followed by the oxidation of iodide with the chloro derivative of PAM to iodine (I ₃ ^? which is either measured directly at 355 (method A) or reacted with starch to form a blue chromogen measurable at 590 nm (method B). The optimum conditions that affect the reaction were ascertained, and under these conditions linear relationship was obtained in the concentration ranges of 2–50 and 1–25 μg/mL PAM in methods A and B, respectively. The calculated molar absorptivity values are 7.26 × 10³ and 1.28 × 10⁴ L/(mol cm) for method A and method B, respectively. Sandell’s sensitivity values, limits of detection (LOD) and quantification (LOQ) are calculated as per ICH guidelines. The proposed methods were applied successfully to the determination of PAM in tablets and injection with good accuracy and precision and without interferences from common additives. The results obtained by the proposed methods were compared favourably with those of the reference method. The accuracy and reliability of the proposed methods were further checked by recovery studies via standard addition procedure.     

Efficient Chemical Protein Synthesis using Fmoc-Masked N-Terminal Cysteine in Peptide Thioester Segments

We report an operationally simple method to facilitate chemical protein synthesis by fully convergent and one-pot native chemical ligations utilizing the fluorenylmethyloxycarbonyl (Fmoc) moiety as an N-masking group of the N-terminal cysteine of the middle peptide thioester segment(s). The Fmoc group is stable to the harsh oxidative conditions frequently used to generate peptide thioesters from peptide hydrazide or o-aminoanilide. The ready availability of Fmoc-Cys(Trt)-OH, which is routinely used in Fmoc solid-phase peptide synthesis, where the Fmoc group is pre-installed on cysteine residue, minimizes additional steps required for the temporary protection of the N-terminal cysteinyl peptides. The Fmoc group is readily removed after ligation by short exposure (<7 min) to 20 % piperidine at pH 11 in aqueous conditions at room temperature. Subsequent native chemical ligation reactions can be performed in presence of piperidine in the same solution at pH 7.     

Polynomial Solution of Non-Central Potentials

We show that the exact energy eigenvalues and eigenfunctions of the Schrödinger equation for charged particles moving in certain class of non-central potentials can be easily calculated analytically in a simple and elegant manner by using Nikiforov and Uvarov (NU) method. We discuss the generalized Coulomb and harmonic oscillator systems. We study the Hartmann Coulomb and the ring-shaped and compound Coulomb plus Aharanov–Bohm potentials as special cases. The results are in exact agreement with other methods.     

Localization and Dynamics of Long‐Lived Excitations in Colloidal Semiconductor Nanocrystals with Dual Quantum Confinement

Semiconductor nanocrystals consisting of a quantum dot (QD) core and a quantum well (QW) shell, where the QD and QW are separated by a tunneling barrier, offer a unique opportunity to engineer the photophysical properties of individual nanostructures. Using the thicknesses of the corresponding layers, the excitons of the first and second excited states can be separated spatially, localizing one state to the QD and the other to the QW. Thus the wave function overlap of the two states can be minimized, suppressing non‐radiative thermalization between the two wells, which in turn leads to radiative relaxation from both states. The molecular analogy to such dual emission would be the inhibition of internal conversion, a special case that violates Kasha′s rule. Using nanosecond time‐resolved spectroscopy of QDQW CdSe/ZnS onion‐like nanocrystals, an intermediate regime of exciton separation and suppressed thermalization is identified where the non‐radiative relaxation of the higher‐energy state is slowed, but not completely inhibited. In this intermediate thermalization regime, the temporal evolution of the delayed emission spectra resulting from trapped carriers mimic the dynamics of such states in nanocrystals that consist of only a QD core. In stark contrast, when a higher‐energy metastable state exists in the QW shell due to strongly suppressed interwell thermalization, the spectral dynamics of the long‐lived excitations in the QD and QW, which are spectrally distinct, are amplified and differ from each other as well as from those in the core‐only nanocrystals. This difference in spectral dynamics demonstrates the utility of exploiting well‐defined exciton localization to study the nature and spatial dependence of the intriguing photophysics of colloidal semiconductor nanocrystals, and illustrates the power of nanosecond gated luminescence spectroscopy in illuminating complex relaxation dynamics which are entirely masked in steady‐state or ultrafast spectroscopy.