Portable single-sided NMR measurements at variable temperatures: Implementation of a thermo-controlled device and application to the heating of bread dough

A temperature control unit was implemented to vary the temperature of samples studied on a commercial Mobile Universal Surface Explorer nuclear magnetic resonance (MOUSE-NMR) apparatus. The device was miniaturized to fit the maximum MOUSE sampling depth (25 mm). It was constituted by a sample holder sandwiched between two heat exchangers placed below and above the sample. Air was chosen as the fluid to control the temperature at the bottom of the sample, at the interface between the NMR probe and the sample holder, in order to gain space. The upper surface of the sample was regulated by the circulation of water inside a second heat exchanger placed above the sample holder. The feasibility of using such a device was demonstrated first on pure water and then on several samples of bread dough with different water contents. For this, T1 relaxation times were measured at various temperatures and depths and were then compared with those acquired with a conventional compact closed-magnet spectrometer. Discussion of results was based on biochemical transformations in bread dough (starch gelatinization and gluten heat denaturation). It was demonstrated that, within a certain water level range, and because of the low magnetic field strength of the MOUSE, a linear relationship could be established between T1 relaxation times and the local temperature in the dough sample.     

Thermal conductivity modeling of nanofluids with ZnO particles by using approaches based on artificial neural network and MARS

Journal of Thermal Analysis and Calorimetry - Nanofluids are attractive alternatives for the current heat transfer fluids due to their remarkably higher thermal conductivity which leads to the...     

Effect of pH on the electrochemical properties of polyaniline nanoparticle suspension in strongly acidic solution: an experimental and theoretical study

Journal of Solid State Electrochemistry - A stable suspension of nanopolyaniline (nPANI) particles can be used in various applications instead of a polyaniline film. The electrochemical behavior of...     

Potentials of boiling heat transfer in advanced thermal energy systems

Journal of Thermal Analysis and Calorimetry - Boiling process is a highly efficient mechanism of heat transfer, which has an important role in industrial and domestic sectors. In this process, a...     

New suggestion for electronic structure of the ground state of ozone

Determination of electronic structure of ozone related geometry is the main subject in this research. The proposed electronic structure must satisfy the experimental geometry, explain the excellent oxidizing properties of ozone, and can also explain the capability of additional reaction with unsaturated hydrocarbons. The potential energy surface of singlet and triplet state of ozone has been studied in order to check the correctness of the proposed structure. The proposed electronic structure of ozone is capable of explaining the oxidizing behavior of ozone in visible wavelength (daylight) 430–700 nm. For comparison, the other proposed structure of ozone in literature such as Pauling, Linnett and Weinhold has also been discussed. The main method used in this research is well-known density functional procedure, B3LYP, which takes the electron correlation aspect into consideration. The polarization and diffused functions are included in the basis set, 6-311++G**. The obtained geometry is a bent and cumulated double bond with inter-bond angle 118.42° (1.39%), and bond length 1.256 Å (1.72%). The obtained results revealed that frontier orbital theory is a proper tool for explaining the addition reaction.     

Kinetic Spectrophotometric Determination of Trace Amounts of Nitrite by Catalytic Reaction between Methylthymol Blue and Bromate

A kinetic spectrophotometric method for determination of trace nitrite in two dynamic ranges (2–100 and 100–500 ng/mL) based on its catalytic effect on the reaction between methylthymol blue and potassium bromate in acidic (sulfuric acid) media is described. The reaction was monitored spectrophotometrically by measuring the decreasing color of methylthymol blue at 437 nm by the fixed‐time method of 4.0 min at 30°C. The detection limit is 0.6 ng/mL, and the relative standard deviations for 50.0 and 250.0 ng/mL nitrite are 1.6% and 1.3%, respectively. The method was used for the determination of nitrite in water samples.     

Interaction of glucose oxidase with alkyl-substituted sepharose 4B

Glucose oxidase (GOD) is often used in immobilized forms for determination of glucose. To examine the possibility of its adsorption by hydrophobic interactions, palmityl-substituted Sepharose 4B (Sepharoselipid) was employed as an adsorptive matrix. Various conditions were used in tests to improve the limited immobilization of the enzyme observed under normal (native) conditions, including use of high concentrations of denaturing agents. Of the denaturants used, only the cationic detergent dodecyl trimethyl ammonium bromide was effective in denaturing the protein and exposing its hydrophobic sites for interaction with alkyl residues on the support. This, followed by the process of renaturation, provided catalytically active immobilized preparations. The apoenzyme, prepared by treatment of the holoenzyme with acidified (NH4)2SO4 or thermal denaturation, was totally immobilized on the support. Furthermore, it was shown that either flavin adenine dinucleotide (FAD) or the alkyl residues, not both, may interact with the nucleotide site at any given time. Results are discussed in terms of high rigidity of GOD molecule and limited exposure of hydrophobic sites in its native structure. The observations are in accord with suggestions in the literature that the FAD pocket is a very narrow channel of hydrophobic properties, adapted to accept its natural coenzyme.     

Aminoalkylation with Aldehydes Mediated by Solid Lithium Perchlorate

Summary. The solid LiClO₄-mediated one-pot reaction of aldehydes with secondary amines and C nucleophiles afforded the corresponding aminoalkylation products in high yields. Unlike the previous reported procedure, the aminoalkylation of aldehyde was achieved in the presence of only 0.5 equivalents of solid lithium perchlorate in dichloromethane as the solvent with good to high yields at room temperature.     

Simulations of the solid, liquid, and melting of 1-n-butyl-4-amino-1,2,4-triazolium bromide

Molecular dynamics simulations are used to study the solid and liquid properties and to predict the melting point of 1-n-propyl-4-amino-1,2,4-triazolium bromide ([patr][Br]) using a force field based on the one developed by Canongia Lopes et al. (J. Phys. Chem. B 2004, 108, 2038) for dialkyl substituted imidazolium salts, which was modified by including terms from the general AMBER force field. Electrostatic charges for the intermolecular interactions were determined from gas-phase ab initio electron structure calculations of the triazolium cation. Simulations of the solid state at 100 K reproduced the experimental density to within 4%. Simulations from 100 K to the melting point and the liquid from 333 to 500 K were performed to determine the temperature dependence of the densities of the two phases. The structures of the solid and liquid phases are characterized with radial distribution functions, which show that there are strong spatial correlations among neighboring ion pairs in liquid [patr][Br]. The dynamic behavior of the ions in the liquid state is also studied by computing velocity autocorrelation functions and the mean-square displacements between the ions. The melting point is determined by simulating void-induced melting. Changes in the density, intermolecular energy, and Lindemann index are used as indicators of the melting transition. The computed melting point is 360 +/- 10 K, which is within 10% of the experimental value 333 K.