N,N‐dimethylaminopyridine as initiator in the copolymerization of diglycidylether of bisphenol A with six‐membered cyclic carbonates

N,N‐Dimethylaminopyridine (DMAP) was used as initiator to cure mixtures of diglycidylether of bisphenol A (DGEBA) and 1,3‐dioxan‐2‐one (TMC) or 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DMTMC). The curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the groups involved in the curing. We observed the formation of five‐membered cyclic carbonates and anionic carbonate groups that remain unreacted at the chain ends. The formation of these groups was explained by the attack of the anionic propagation species on the methylene carbon of the carbonate group, which leads to an alkyl‐oxygen rupture. By performing the cure in the thermobalance we could evaluate the loss of CO₂ produced in the samples containing carbonates. The kinetics were studied by DSC and analyzed with isoconversional procedures. The addition of carbonates slows down the curing rate. Thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA) experiments were used to evaluate the properties of the materials obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2873–2882, 2006     

Single‐Molecule Redox‐Targeting Reactions for a pH‐Neutral Aqueous Organic Redox Flow Battery

Aqueous organic redox flow batteries (AORFBs) have received considerable attention for large‐scale energy storage. Quinone derivatives, such as 9,10‐anthraquinone‐2,7‐disulphonic acid (2,7‐AQDS), have been explored intensively owing to potentially low cost and swift reaction kinetics. However, the low solubility in pH‐neutral electrolytes restricts their application to corrosive acidic or caustic systems. Herein, the single molecule redox‐targeting reactions of 2,7‐AQDS anolyte are presented to circumvent its solubility limit in pH‐neutral electrolytes. Polyimide was employed as a low‐cost high‐capacity solid material to boost the capacity of 2,7‐AQDS electrolyte to 97 Ah L^?1. Through in situ FTIR spectroscopy, a hydrogen‐bonding mediated reaction mechanism was disclosed. In conjunction with NaI as catholyte and nickel hexacyanoferrate as the catholyte capacity booster, a single‐molecule redox‐targeting reaction‐based full cell with energy density up to 39 Wh L^?1 was demonstrated.     

Measurements of water vapor isotope ratios with wavelength-scanned cavity ring-down spectroscopy technology: new insights and important caveats for deuterium excess measurements in tropical areas in comparison with isotope-ratio mass spectrometry

The new infrared laser spectroscopic techniques enable us to measure the isotopic composition (δ(18)O and δ(2)H) of atmospheric water vapor. With the objective of monitoring the isotopic composition of tropical water vapor (West Africa, South America), and to discuss deuterium excess variability (d=δ(2)H - 8δ(18)O) with an accuracy similar to measurements arising from isotope-ratio mass spectrometry (IRMS), we have conducted a number of tests and calibrations using a wavelength-scanned cavity ring-down spectroscopy (WS-CRDS) technique. We focus in this paper on four main aspects regarding (1) the tubing material, (2) the humidity calibration of the instrument, (3) the water vapor concentration effects on δ, and (4) the isotopic calibration of the instrument. First, we show that Synflex tubing strongly affects δ(2)H measurements and thus leads to unusable d values. Second, we show that the mixing ratio as measured by WS-CRDS has to be calibrated versus atmospheric mixing ratio measurements and we also suggest possible non-linear effects over the whole mixing ratio range (~2 to 20 g/kg). Third, we show that significant non-linear effects are induced by water vapor concentration variations on δ measurements, especially for mixing ratios lower than ~5 g/kg. This effect induces a 5 to 10‰ error in deuterium excess and is instrument-dependent. Finally, we show that an isotopic calibration (comparison between measured and true values of isotopic water standards) is needed to avoid errors on deuterium excess that can attain ~10‰.     

HXeOBr in a xenon matrix

We report on a new noble-gas molecule HXeOBr prepared in a low-temperature xenon matrix from the HBr and N(2)O precursors by UV photolysis and thermal annealing. This molecule is assigned with the help of deuteration experiments and ab initio calculations including anharmonic methods. The H-Xe stretching frequency of HXeOBr is observed at 1634 cm(-1), which is larger by 56 cm(-1) than the frequency of HXeOH identified previously. The experiments show a higher thermal stability of HXeOBr molecules in a xenon matrix compared to HXeOH.     

Improved thermosets obtained from cycloaliphatic epoxy resins and γ‐butyrolactone with lanthanide triflates as initiators. I. Study of curing by differential scanning calorimetry and Fourier transform infrared

3,4‐Epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate was cured with different proportions of γ‐butyrolactone with lanthanum, samarium, and ytterbium triflates as catalysts. The curing was studied with differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the epoxide, lactone, and intermediate spiroorthoester groups. The glass‐transition temperature of the crosslinked materials was high and increased when the proportion of lactone decreased. The kinetics were studied with DSC experiments and were analyzed with isoconversional procedures. The differences in the reactivities of the systems were related to the Lewis acidity of the lanthanide salt used as the initiator. An increase in the proportion of lactone produced an increase in the reaction rate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2337‐2347, 2005     

Reduction of the shrinkage of thermosets by the cationic curing of mixtures of diglycidyl ether of bisphenol A and 6,6‐dimethyl‐(4,8‐dioxaspiro[2.5]octane‐5,7‐dione)

Ytterbium and lanthanum triflates were used as initiators to cure mixtures of diglycidyl ether of bisphenol A and 6,6‐dimethyl‐(4,8‐dioxaspiro[2.5]octane‐5,7‐dione) in several proportions. The evolution of the epoxy and 6,6‐dimethyl‐(4,8‐dioxaspiro[2.5]octane‐5,7‐dione) bands during curing and the linear ester groups in the final materials were evaluated with Fourier transform infrared in the attenuated‐total‐reflection mode. The use of a conventional cationic initiator, boron trifluoride monoethylamine, was also studied to test the advantages of lanthanide triflates. The shrinkage after curing and the thermal degradability of the materials with variations in the comonomer ratio and the initiator were evaluated and related to the chemical structure of the final network. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6869–6879, 2006     

Cationic copolymerization of cycloaliphatic epoxy resin with a spirobislactone with lanthanum triflate as initiator: I. Characterization and shrinkage

3,4‐Epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (ECH) was cured with different proportions of 1,6‐dioxaspiro [4,4]nonane‐2,7‐dione (s(γ‐BL)) using lanthanum triflate as a catalyst. The shrinkage undergone during curing was monitored by means of thermomechanical analysis (TMA) in isothermal experiments. Fourier transform infrared spectroscopy in attenuated‐total‐reflection mode (FTIR/ATR) was used to study the evolution of lactone, epoxide, and intermediate spiroorthoester (SOE) groups to identify the different reactions that take place during the curing process. DSC was used to study the thermal characteristics of the curing process and to assess the glass‐transition temperature (T_g) of the cured material. The dynamic mechanical properties of the cured material were determined based on the data obtained by DMTA. An increase in the proportion of s(γ‐BL) led to a decrease in the gelation time and the shrinkage after gelation. By combining the data obtained by TMA and FTIR/ATR, it was also possible to identify the reactive processes responsible for the shrinkage. It was observed that an increase in the proportion of s(γ‐BL) also increases the speed of the curing process and modifies the structure of the material, thus giving rise to more flexible materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3421–3432, 2005     

Isothermal kinetics of photopolymerization and thermal polymerization of bis-GMA/TEGDMA resins

The purpose of this work is to analyse certain kinetic features related to thermoinduced and photoinduced isothermal curing in the 25/75 mass% bis-GMA/TEGDMA system. The kinetic parameters associated with photo and thermal curing were determined and compared using an isoconversional procedure and the kinetic model was obtained by means of a reduced master plot. In photocuring, the kinetic results obtained by means of this phenomenological methodology were compared with those obtained on the basis of mechanistic considerations. In this case, we estimated the propagation and termination constants associated with photocuring at different conversions. When the phenomenological procedure is performed, the rate constant decreases slightly during the curing process and the autoacceleration effect of the process is demonstrated in the kinetic model, which is autocatalytic. However, in the mechanistic model, this same effect is noted through an increase in the rate constants, while it is assumed that the kinetic model is in the order of n with n=1.     

Organocatalytic asymmetric conjugate addition to allenic esters and ketones

The first example of an organocatalytic enantioselective conjugate addition of cyclic beta-ketoesters and glycine imine derivatives to electron-deficient allenes is described. We disclose that the corresponding chiral beta,gamma-unsaturated carbonyl compounds are formed exclusively under phase-transfer conditions using either cinchona-alkaloid-derived or biphenyl-based chiral quaternary ammonium salts as catalysts. The scope of the reaction for beta-ketoesters is outlined for allenes having a ketone or ester motif as electron-withdrawing group as well as different substituents in the 3-position, giving the optically active products in high yields and excellent diastereo- and enantioselectivities (90-96% ee). The conjugate addition also proceeds for a number of cyclic beta-ketoesters having different ring sizes, ring systems, and substituents in high yields and enantioselectivities. Glycine imine derivatives also undergo the asymmetric conjugate addition to electron-deficient allenes in high yields and with enantioselectivities in the range of 60-88% ee, thus providing a rapid entry to optically active alpha-vinyl-substituted alpha-amino acid derivatives. It is shown that the enantioselectivity is strongly dependent on the size of the ester moiety of the nucleophile in combination with the catalytic system used. The high synthetic value of the chiral products arising from these new catalytic processes is demonstrated by two straightforward transformations leading in one case to optically active hexahydrobenzopyranones and in the other to substituted pyroglutamates (gamma-lactames).     

New poly(ether‐ester) thermosets obtained by cationic curing of DGEBA and 7,7‐dimethyl‐6,8‐dioxaspiro[3.5] nonane‐5,9‐dione with several Lewis acids as initiators

Scandium, ytterbium, and lanthanum triflates and boron trifluoride monoethylamine were used as cationic initiators to cure a mixture 2:1 (mol/mol) of diglycidylether of bisphenol A (DGEBA) and 7,7‐dimethyl‐6,8‐dioxaspiro[3.5]nonane‐5,9‐dione (MCB). The evolution of the epoxy and lactone during curing and the linear ester groups in the final materials were evaluated by Fourier Transform Infrared in the attenuated‐total‐reflection mode. The kinetic parameters of the curing process were calculated from DSC analysis applying isoconversional procedures. The shrinkage on curing and the thermal degradability of the materials on varying the initiator used were evaluated. The expandable character of MCB was confirmed. The materials obtained were more degradable than conventional epoxy resins due to the tertiary ester groups incorporated in the network by copolymerization. © 2008 Wiley Periodicals, Inc J Polym Sci Part A: Polym Chem 46: 1229–1239, 2008