Heats of adsorption of linear CO species adsorbed on the Au degrees and Ti+delta sites of a 1% Au/TiO2 catalyst using in situ FTIR spectroscopy under adsorption equilibrium

The heats of adsorption of two linear CO species adsorbed on the Au degrees particles (denoted L(Au degrees)) and on the Ti(+delta) sites (denoted L(Ti+delta)) of a 1% Au/TiO(2) catalyst are determined as the function of their respective coverage by using the AEIR procedure (adsorption equilibrium infrared spectroscopy) previously developed. Mainly, the evolutions of the IR band area of each adsorbed species (2184 cm(-1) for L(Ti+delta) and at 2110 cm(-1) for L(Au degrees)) as a function of the adsorption temperature T(a), at a constant CO adsorption pressure P(CO), provide the evolutions of the coverages theta(LTi+delta) and theta(LAu degrees ) of each adsorbed CO species with T(a) in isobar conditions that give the individual heats of adsorption. It is shown that they linearly vary from 74 to 47 kJ/mol for L(Au degrees ) and from 50 to 40 kJ/mol for L(Ti+delta) at coverages 0 and 1, respectively. These values are consistent with literature data on model Au particles and TiO(2). In particular, it is shown that the mathematical formalism supporting the AEIR procedure can be applied to literature data on Au-containing solids (single crystals and model particles).     

Spectroscopic and Quantum Mechanical Studies of Substituted Anilines and their Charge-Transfer Complexes with Iodine in Different Solvents

Summary. Equilibrium constants and molar extinction coefficients for 1:1 charge-transfer complexes between 2-hydroxyaniline (HA), 5-chloro-2-hydroxyaniline (CHA), and 4-bromo-2,6-dimethylaniline (BMA) as donors and iodine, as a typical σ-acceptor were determined spectrophotometrically in chloroform, dichloromethane, and carbontetrachloride solutions. Spectral characteristics and formation constants are discussed in terms of donor molecular structure and solvent polarity. The stoichiometry of the complexes was established to be 1:1. For this purpose, optical data were subjected to the form of the Rose-Drago equation for 1:1 equilibria. Electronic absorption spectra of the studied anilines were measured in different solvents. Spectral data were reported and band maxima were assigned to the appropriate molecular orbital transitions (π–π^* and n–π^* electronic transition). Solvent effects on the electronic transitions were discussed. Optimized geometry of the studied anilines was obtained at B3LYP/6-31 + G(d). The effect of the electronic factors of the substituents on the geometrical parameters of the ring has been explored. Geometrical values of the ring deviate from the regular hexagonal ring. Intramolecular H-bonds in HA and CHA have been computed at B3LYP/6-31 + G(d) and MP2/6-31 + G(d) levels. The H-bonding distance was calculated to be 2.105 ? in HA and 2.127 ? in CHA. Abstracted from her M.Sc. thesis     

Power limitations in fiber-optic frequency-division multiplexed systems

Abstract

Launch power is limited to the milliwatt level by stimulated Brillouin scattering (SBS) in a single-channel, coherent fiber-optic network. Increasing the number of frequency-division multiplexed channels causes the power limit to decrease quickly to submilliwatt levels due to three-wave intermodulation to keep the signal-to-noise ratio from deteriorating significantly. As the number of channels increases, stimulated Raman scattering (SRS) begins to dominate. If a maximum of 0.5–dB depletion in the highest-frequency channel is allowed, SRS dominates when the number of multiplexed channels reaches about 300. Generally, the launch-power-limiting phenomenon is dependent on the number of channels being multiplexed.     

Synthesis and characterization of spinel LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles prepared by high-energy milling and hydrothermal method

Spinel LiMn₂O₄ has been known to be a technologically important, environmental-friendly, and low-cost cathode material used in Li-based rechargeable batteries, and it is also widely available. Nanoparticle spinel LiMn₂O₄ has been synthesized by the top-down, high-energy milling, and hydrothermal methods. SEM images, X-ray diffraction patterns, and neutron high-resolution powder diffraction patterns have confirmed the nanocrystalline nature of the spinel LiMn₂O₄ samples. Raman and Fourier transform infrared (FTIR) measurements show typical absorption and vibration spectra typical for the spinel LiMn₂O₄ showing the formation of various metallic bonds in the sample. The strongest Raman and FTIR signals come from the higher frequency region, with weaker signals appearing in the lower frequency range.     

On Jacobi fields

We define curves on a Riemannian manifold as integrals of generalized Jacobi fields. We show that the force term that deviates the trajectory from the geodesic motion can be constructed as a functional of the metric tensor. These curves can be interpreted as particles (observers) coupled nonminimally with gravitation that can provide a class of residual observers for the inevitable singularity—as shown in the text.This essay received an honorable mention (1976) from the Gravity Research Foundation-Ed.     

Electroanalysis with tungsten electrodes : I. The tungsten/platinum bimetallic pair in potentiometry at zero current

The W/Pt bimetallic pair has been applied in various potentiometric titrations. Except for the neutralization of dicarboxylic acids, e.g., oxalic, the pair is suitable for neutralization titrations where ΔE/ΔV values at the equivalence point are higher on W than on Pt. Tungsten oxides increase the inflexion pd. The pair is also suitable for oxidation/reduction titrations using permanganate, dichromate, and ceric sulfate, and for precipitation reactions with silver nitrate. However, it gives a small inflexion pd in the oxidation of thiosulfate by iodine. EDTA titrations of copper, magnesium, and calcium give a sharp inflexion in the case of copper only. This pair may be useful in routine analyses requiring a robust electrode assembly but not a high degree of accuracy.     

Die Veresterungsgeschwindigkeiten der Monoaminobenzoesäuren und der 1- und 2-Pyridinkarbonsäuren in Glykol und Glyzerin

Zusammenfassung Es werden die Veresterungsgeschwindigkeiten der Monoaminobenzoesäuren und der 1- und 2-Pyridinkarbonsäuren bei 25° mit Chlorwasserstoff als Katalysator sowohl in wasserfreiem als auch in wasserhaltigem Glykol und in wasserfreiem Glyzerin gemessen, die derm- und derp-Aminobenzoesäure und der 2-Pyridinkarbonsäure (Nikotinsäure) auch in wasserhaltigem Glyzerin. Die Abhängigkeit der monomolekularen Geschwindigkeitskonstanten vom Wassergehalt (w) des Mediums und dem Überschuß der Konzentration der Salzsäure über die der organischen Säure, bzw. ihres Esters (C) wird für die drei zuletzt genannten Säuren durch Formeln dargestellt. Diese Geschwindigkeitskonstanten nehmen durchwegs sowohl in wasserfreiem als auch in wasserhaltigem Glykol und Glyzerin nicht nur rascher als die Konzentration der gesamten Salzsäure, sondern auch als die des obigen Überschusses, d. h. der freien Salzsäure, zu.FürC=1/3 sind beiw=0.03 die Geschwindigkeitskonstanten derm- und derp-Aminobenzoesäure und der Nikotinsäure in Äthylalkohol um 20–30 %, die der Anthranilsäure um 70%, die der Pikolinsäure um 130% größer als in Glykol, beiw=0.7 dagegen die der drei ersteren Säuren um 35–50% kleiner.In Glykol sind die Konstanten bei der Anthranilsäure und den Pyridinkarbonsäuren kleiner als in Glyzerin, bei den übrigen wie bei den früher untersuchten Säuren aber größer.Die sterische Wirkung der Aminogruppe in Orthostellung ist in Glykol größer, in Glyzerin kleiner als in Äthylalkohol.Unter gleichen Bedingungen Bind die Konstanten der Veresterungsgeschwindigkeit der Nikotinsäure in Glykol und Glyzerin etwa viermal, in Äthylalkohol nur etwa zweimal größer als die der Pikolinsäure.     

Three isomorphous 2,6‐dibromopyridinium tetrabromidometallates: (C5H4Br2N)2[MBr4]·2H2O (M = Cu,Cd and Hg)

The structures of three isomorphous compounds, namely bis(2,6‐dibromopyridinium) tetrabromidocuprate(II) dihydrate, (C₅H₄Br₂N)₂[CuBr₄]·2H₂O, bis(2,6‐dibromopyridinium) tetrabromidocadmate(II) dihydrate, (C₅H₄Br₂N)₂[CdBr₄]·2H₂O, and bis(2,6‐dibromopyridinium) tetrabromidomercurate(II) dihydrate, (C₅H₄Br₂N)₂[HgBr₄]·2H₂O, show a crystal supramolecularity represented by M—Br...H—O—H...Br—M intermolecular interactions along with (π)N—H...OH₂ hydrogen‐bonding interactions forming layers connected via aryl–aryl face‐to‐face stacking of cations, leading to a three‐dimensional network. The anions have significantly distorted tetrahedral geometry and crystallographic C₂ symmetry. The stability of this crystal lattice is evidenced by the crystallization of a whole series of isomorphous compounds.     

Synthesis,characterization, antimicrobial activity and ultrastructure of the affected bacteria of new quinoline compounds

The reaction on 8-hydroxy quinoline-7-aldehyde azo compounds (HL _n ) (where n = 1–5) with 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one to obtain HL _n (where n = 6–10) have been characterized by means of TLC, melting point and spectral data, such as IR, ¹H NMR, mass spectra and thermal studies. The X-ray diffraction patterns of two starting materials 8-hydroxy quinoline-7-aldehyde (start 1), 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one (start 2) and the ligands (HL_5,10) are investigated in powder form. All the ligands have been screened for their antimicrobial activity against four local bacterial species, two Gram-positive bacteria (Bacillus cereus and Staphylococcus aureus) and two Gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) as well as against four local fungi; Aspergillus niger, Alternaria alternata, Penicillium italicum and Fusarium oxysporium. The results show that the azo ligands (HL _n ) (where n = 1–5) have no antimicrobial activity against bacteria and fungi while most azomethine ligands (HL _n ) (where n = 6–10) are good antibacterial agents against E. coli and K. pneumoniae as well as antifungal agents against P. italicum and A. alternata. The results were compared to standard substances (start 1) and (start 2). Among the azomethine ligands, HL₁₀ was the most effective against the most microorganisms tested. The size of clear zone was ordered as p-(OCH₃ < CH₃ < H < Cl < NO₂) as expected from Hammett’s constant (σ ^R ). Also, the ultrastructure study of the affected bacteria confirmed that HL₈ is good antibacterial agent against E. coli and S. aureus.     

Novel synthesis of alkoxy substituted oxa[9]helicenes by the reaction of helical quinone with alcohols

The reaction of helical quinone with alcohols in the presence of Brønsted acid such as para-toluenesulfonic acid (pTSA) or HCl proceeded smoothly to produce the corresponding alkoxy substituted oxa[9]helicenes in good yields.