自由曲面光学虚拟制造与检测系统的探讨

自由曲面光学产品设计、制造与检测的工艺流程，通常采取试凑法逐次逼近。由于加工 检测 再加工，循环往复，既费时，成本又高，产生了瓶颈问题。为了解决此弊端，本文运用虚拟制造技术，提出光学虚拟制造的基本构想，即虚拟制造系统结构模型，给出光学系统虚拟原型的构成和光学系统成像质量虚拟检测系统的构成，讨论光学成像质量的仿真检测以及敏度分析方法。研究结果表明：运用虚拟制造与检测技术，可缩短研发周期，降低成本，优化工艺并提高产品质量。     

Design and characterization of [(Et)3 N-H]FeCl4 as a nanomagnetic ionic liquid catalyst for the synthesis of xanthene derivatives under solvent-free conditions

The triethylamine-based nanomagnetic ionic liquid, [(Et)₃ N-H]FeCl₄, was synthesized, and its structural and chemical characteristics were detected. The thermogravimetric analysis indicated its high thermal stability with a decomposition temperature higher than 300 °C. Additionally, [(Et)₃ N-H]FeCl₄ was used to efficiently catalyze the synthesis of xanthene derivatives under solvent-free conditions at 120 °C. [(Et)₃ N-H]FeCl₄ was recycled and reused at least five times.

Graphical abstract

     

Application of Monte Carlo simulation method to polymerization kinetics over Ziegler–Natta catalysts

In the current work, the Monte Carlo simulation method was applied to ethylene polymerization over Ziegler–Natta catalysts. As expected, polymerization over each center of a Ziegler–Natta catalyst leads to a polymer having a Schultz–Flory molecular weight distribution. Notwithstanding, the total molecular weight distribution obtained by all catalyst centers together is at least twice as broad as that of each center. As another interesting finding, the introduction of hydrogen to the reaction deactivates the catalyst active centers and thereby reduces the catalyst activity. Nevertheless, it does not mainly affect the polymerization kinetics. In addition, the polymer molecular weight falls as hydrogen is added to the reaction since it acts as a strong transfer agent. The same effect is seen when cocatalyst concentration increases. Hydrogen also widens the polymer molecular weight distribution. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 45–56, 2009     

Effect of upstream velocity profile and integral flow straighteners on turbine flowmeters

One of the most important factors determining the shape of the calibration curve for a given turbine meter is the change in the upstream velocity distribution with flowrate. A theoretical model is evolved which can be used to predict the effects of velocity profile, viscosity and swirl on the calibration curve. It has also been used to explain the calibration curve of a commercial meter having a geometry very different from that for which the theory was developed. The effect of different types of integral flow straighteners on turbine meters is also investigated and found to depend on both the number of vanes and their length. A correlation is suggested for radial-vaned flow-straighteners     

A silica fiber coated with a ZnO-graphene oxide nanocomposite with high specific surface for use in solid phase microextraction of the antiepileptic drugs diazepam and oxazepam

A novel ZnO-graphene oxide nanocomposite was prepared and is shown to be a viable coating on fused silica fibers for use in solid phase microextraction (SPME) of diazepam and oxazepam from urine, this followed by thermal desorption and gas chromatographic quantitation using a flame ionization detector. A central composite design was used to optimize extraction time, salt percentage, sample pH and desorption time. Limits of detection are 0.5 μg·L^?1 for diazepam and 1.0 μg·L^?1 for oxazepam. Repeatability and reproducibility for one fiber (n?=?4), expressed as the relative standard deviation at a concentration of 50 μg·L^?1, are 8.3 and 11.3% for diazepam, and 6.7 and 10.1% for oxazepam. The fiber-to-fiber reproducibility is <17.6%. The calibration plots are linear in the 5.0–1000 μg·L^?1 diazepam concentration range, and from 1.0–1000 μg·L^?1 in case of oxazepam. The fiber for SPME has high chemical and thermal stability (even at 280 °C) after 50 extractions, and does not suffer from a reduction in the sorption capacity.

Open image in new window

Graphical abstract A hydrothermal method was introduced for preparation of ZnO- GO nano composite on a fused silica fiber as solid phase microextraction with high mechanical, chemical stability and long service life

     

Synthesis of pH‐responsive magnetic yolk–shell nanoparticles: A comparison between conventional etching and new deswelling approaches

Iron oxide (Fe₃O₄) magnetic nanoparticles as movable cores were used to synthesize yolk–shell nanoparticles with pH‐responsive shell composed of ethylene glycol dimethacrylate (EGDMA)‐crosslinked poly(acrylic acid) (PAA) via two different routes. In the first more common route, Fe₃O₄ nanoparticles were coated with silica layer via the Stöber process to yield Fe₃O₄@SiO₂ core–shell nanoparticles, subsequently used as seeds in the distillation precipitation copolymerization of AA and EGDMA to yield Fe₃O₄@SiO₂@P(AA‐EGDMA). The silica layer was selectively removed through alkali etching to yield Fe₃O₄@air@P(AA‐EGDMA). In the second route, Fe₃O₄ nanoparticles without any stabilization were used as seeds in the distillation precipitation copolymerization of AA and EGDMA to yield Fe₃O₄@P(AA‐EGDMA) core–shell nanoparticles. The nanoparticles were subsequently dispersed in acidic medium of pH = 2. Yolk–shell Fe₃O₄@air@P(AA‐EGDMA) nanoparticles were formed through deswelling of crosslinked PAA because of protonation of carboxyl groups at low pH values. Various techniques were utilized to investigate the characteristics of the synthesized core–shell nanoparticles. Formation of yolk–shell nanostructure was observed for both synthesis routes, namely etching of silica layer and deswelling approaches, from vibrating sample magnetometry and transmission electron microscopy results. Both types of nanoparticles showed pH‐responsive behaviour, i.e. decrease in absorption with increase in pH, as examined using UV–visible spectroscopy.     

Effect of surface modification with various thiol compounds on colloidal stability of gold nanoparticles

Gold nanoparticles (AuNPs) are attractive materials due to their special optical and electronic properties. However, they tend to aggregate particularly in the presence of thiol‐containing compounds. In this study, to investigate the effect of surface conjugation with thiol‐containing compounds on colloidal stability, thiol compounds with various structures as modifying agents were used. To this end, AuNPs were synthesized and stabilized by trisodium citrate in aqueous solution, and then modified with thiol‐containing compounds, namely cysteamine hydrochloride (MEA, containing primary amine groups), 2‐mercaptoethanol (BME, containing hydroxyl groups), 1‐dodecanthiol (LCA, containing long‐chain alkyl groups) and thioglycolic acid (TGA, containing carboxylic acid groups). We studied the effect of thiol ligands on solution stability of colloidal AuNPs and on the formation of aggregates originating from the modification process using UV–visible spectroscopy, dynamic light scattering, field emission scanning electron microscopy and transmission electron microscopy. Results showed that surface modification with MEA, BME and LCA led to the formation of aggregates. However, conjugation with TGA showed a concentration‐dependent behaviour: surface modification with low concentration resulted in the formation of aggregates whereas that with high concentration of TGA did not disturb the colloidal stability of AuNPs. Finally, the effect of surface modification on temperature increase of solutions originating from infrared light irradiation was studied, where the temperature increase depends on the surface‐modifying compound.     

Hydrothermal synthesis and characterization of a layered cobalt phenylphosphonate, Co(PhPO3)(H2O)

We report the hydrothermal synthesis and characterization of a layered cobalt phenylphosphonate. Unlike most metal phosphonates reported to date, the structure was solved by single crystal X-ray diffraction (SC-XRD). Co(ii) centres are hexa-coordinated by oxygen and the octahedra corner-share into a layer. The layers are capped by phenylphosphonate groups, where the phenyl groups define a hydrophobic bilayer region. The material was also characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA) and SQUID (superconducting quantum interference device) magnetometry. The material undergoes an antiferromagnetic transition at a relatively low Néel temperature of 4.0 K, while the Curie-Weiss temperature of -76.5 K reflects the low-dimensionality of the magnetic structure. The effective magnetic moment of 5.01 micro(B) per Co(2+) verifies a high-spin configuration and an octahedral coordination of the metal centres. This layered material was correctly predicted in the literature from powder data, adds to the structural diversity of the cobalt phosphonates, and may be useful as an intercalation or exfoliation compound.