A Maltol-Containing Ruthenium Polypyridyl Complex as a Potential Anticancer Agent

Cancer is one of the main causes of death worldwide. Chemotherapy, despite its severe side effects, is to date one of the leading strategies against cancer. Metal-based drugs present several potential advantages when compared to organic compounds and they have gained trust from the scientific community after the approval on the market of the drug cisplatin. Recently, we reported the ruthenium complex ([Ru(DIP)₂(sq)](PF₆) (where DIP is 4,7-diphenyl-1,10-phenantroline and sq is semiquinonate) with a remarkable potential as chemotherapeutic agent against cancer, both in vitro and in vivo. In this work, we analyse a structurally similar compound, namely [Ru(DIP)₂(mal)](PF₆), carrying the flavour-enhancing agent approved by the FDA, maltol (mal). To possess an FDA approved ligand is crucial for a complex, whose mechanism of action might include ligand exchange. Herein, we describe the synthesis and characterisation of [Ru(DIP)₂(mal)](PF₆), its stability in solutions and under conditions that resemble the physiological ones, and its in-depth biological investigation. Cytotoxicity tests on different cell lines in 2D model and on HeLa MultiCellular Tumour Spheroids (MCTS) demonstrated that our compound has higher activity than cisplatin, inspiring further tests. [Ru(DIP)₂(mal)](PF₆) was efficiently internalised by HeLa cells through a passive transport mechanism and severely affected the mitochondrial metabolism.     

Non-Oxido-Vanadium(IV) Metalloradical Complexes with Bidentate 1,2-Dithienylethene Ligands: Observation of Reversible Cyclization of the Ligand Scaffold in Solution

Derivatives of 1,2-dithienylethene (DTE) have superb photochromic properties due to an efficient reversible photocyclization reaction of their hexatriene structure and, thus, have application potential in materials for optoelectronics and (multi-responsive) molecular switches. Transition-metal complexes bearing switchable DTE motifs commonly incorporate their coordination site rather distant from the hexatriene system. In this work the redox active ligand 1,2-bis(2,5-dimethylthiophen-3-yl)ethane-1,2-dione is described, which reacts with [V(TMEDA)₂Cl₂] to give a rare non-oxido vanadium(IV) species 3(M,M/P,P) . This blue complex has two bidentate en-diolato ligands which chelate the V^IV center and give rise to two five-membered metallacycles with the adjacent hexatriene DTE backbone bearing axial chirality. Upon irradiation with UVA light or prolonged heating in solution, the blue compound 3(M,M/P,P) converts into the purple atropisomer 4(para,M/para,P) . Both complexes were isolated and structurally characterized by single-crystal X-ray diffraction analysis (using lab source and synchrotron radiation). The antiparallel configuration (M or P helicity) present in both 3(M,M/P,P) and 4(para,M/para,P) is a prerequisite for (reversible) 6π cyclization reactions. A CW EPR spectroscopic study reveals the metalloradical character for 3(M,M/P,P) and 4(para,M/para,P) and indicates dynamic reversible cyclization of the DTE backbone in complex 3(M,M/P,P) at ambient temperature in solution.     

Electrochemiluminescence Bioassays with a Water‐Soluble Luminol Derivative Can Outperform Fluorescence Assays

The most efficient and commonly used electrochemiluminescence (ECL) emitters are luminol, [Ru(bpy)₃]²⁺, and derivatives thereof. Luminol stands out due to its low excitation potential, but applications are limited by its insolubility under physiological conditions. The water‐soluble m‐carboxy luminol was synthesized in 15 % yield and exhibited high solubility under physiological conditions and afforded a four‐fold ECL signal increase (vs. luminol). Entrapment in DNA‐tagged liposomes enabled a DNA assay with a detection limit of 3.2 pmol L^?1, which is 150 times lower than the corresponding fluorescence approach. This remarkable sensitivity gain and the low excitation potential establish m‐carboxy luminol as a superior ECL probe with direct relevance to chemiluminescence and enzymatic bioanalytical approaches.     

Thermoluminescence of nanocrystalline LiF:Mg, Cu, P

Nanocrystalline LiF:Mg, Cu, P of rod shape (about 30-40 nm in diameter and 0.3-0.5 μm in length) has been prepared by the chemical co-precipitation method. Thermoluminescence (TL) and dosimetric characteristics of the nanocrystalline phosphor are studied and presented here. The formation of the material was confirmed by the X-ray diffraction (XRD). Its shape and size were also observed by transmission electron microscope (TEM). The TL glow curve of the nanocrystalline powder shows a single peak at 410 K along with four overlapping peaks of lesser intensities at around 570, 609, 638 and 663 K. The observed TL sensitivity of the prepared nanocrystalline powder is less than that of the commercially available “Harshaw TLD-700H hot-pressed chips” at low doses but it still around three times more than that of LiF:Mg, Ti (TLD-100) phosphor. The 410 K peak of the nanomaterial phosphor shows a very linear response with exposures increasing up to very high values (as high as 10 kGy), where all the other thermoluminesent dosimeters (TLD) phosphors show saturation. This linear response over a large span of exposures (0.1 Gy-10 kGy) along with negligible fading and its insensitivity to heating treatments makes the nanocrystalline phosphor useful for its application to estimate high exposures of γ-rays. The ‘tissue equivalence’ property of this material also makes it useful over a wide range of high-energy radiation.     

Atomistic Simulation Study of Cu0.327Ni0.673 Alloys: from Solid Solution to Phase Segregation

We present a combined Monte‐Carlo/molecular dynamics study of a Cu_0.327Ni_0.673 alloy system. On the basis of nearest‐neighbor coordination number analyses atomic clustering and phase segregation is explored. Along this line, free energy profiles are calculated and separated into entropic and energetic contributions. The competition of both terms was found in accordance to the experimental phase diagrams (phase separation of the solid solution below about 600 Kelvin). Two independent simulation runs were performed. At 1000 Kelvin the observed configurations correspond to solid solutions exhibiting a weak tendency to cluster atoms of identical species. At room temperature the energetic favoring of atomic separation is clearly dominant and leads to the formation of Ni‐rich and Cu‐rich domains. The latter are separated by interfacial regions whose width ranges from 0.5 to 1 nanometers.     

Three New Iron(II) Thiocyanato Coordination Polymers Based on 4,4′‐Bipyridine as Ligand and the Influence of Methanol on Their Structures

Reaction of iron(II) thiocyanate with 4,4‐bipyridine (bipy) in methanol leads to the formation of three new solvates of different composition depending on the reaction conditions: At room temperature two new ligand‐rich 1:2 (1:2 = ratio between metal and N‐donor ligand) polymorphic forms [Fe(NCS)₂(bipy)₂ · 2MeOH]_n ( 1I ) and [Fe(NCS)₂(bipy)(MeOH)₂ · (bipy)]_n ( 1II ) are obtained, whereas solvothermal conditions leads to the formation of the new ligand‐deficient 1:1 compound [{Fe(NCS)₂(bipy)(MeOH)}₂]_n ( 2 ). All crystal structures were determined by X‐ray single crystal structure analysis. In the crystal structure of modification 1I the metal atoms are coordinated by four bridging bipy ligands, which connect them into layers. The methanol molecules occupy voids in the structure. Compared to 1I in modification 1II the crystal structure contains of linear Fe–bipy–Fe chains, which are further connected by hydrogen bonds between coordinating MeOH and noncoordinated bipy ligands into layers. The ligand‐deficient 1:1 compound 2 shows a completely different coordination topology with linear Fe–bipy–Fe chains, which are connected by coordinating methanol molecules into double‐chains. In all compounds the thiocyanato anions are terminal N‐bonded to the metal atoms. Investigation of the thermal behavior of compound 1I shows a two‐step decomposition, in which ligand‐deficient intermediates are formed. Magnetic measurements on 1I reveal Curie–Weiss paramagnetism with increasing antiferromagnetic interactions on cooling.     

Preparation,characterization and electroluminescence studies of copper doped zinc sulfide nanocrystals

Copper doped zinc sulfide nanoparticles were prepared by chemical precipitation method. The size of the particles was varied by changing the concentration of capping agent. The XRD studies indicate that most of the samples are cubic in nature. The broadening of peaks tends to increase with increasing capping agent concentration showing decrease in particle size. The crystalline size computed using Scherrer formula is found to be in range of 3–10 nm. Absorption spectra show absorption edge in UV region. The edge was found to shift towards shorter wavelength as the capping agent concentration is increased. This indicates increased effective band gap and hence reduced particle size. The nanoparticle size has been estimated in the range 5–10 nm using effective mass approximation model. For electroluminescence (EL) study of ZnS:Cu nanocrystals, the EL cells were prepared by placing ZnS:Cu nanoparticles between SnO₂ coated conducting glass plate and aluminum foil. Alternating voltage of various frequencies was applied and EL brightness (B) at different voltages (V) was measured and reported in this paper.     

Luminescence in LiNaSO4:Eu phosphor

Abstract

LiNaSO₄: Eu is a recently discovered thermoluminescence dosimetry (TLD) phosphor which is more sensitive than the widely used CaSO₄:Dy. In this paper results are reported on TL glow curves, TL emission spectra and PL photoluminescence. These measurements help to understand the role of impurity and the mechanism of thermoluminescence in this phosphor.