Room temperature LPG resistive sensor based on the use of a few-layer graphene/SnO<Subscript>2</Subscript> nanocomposite

A nanocomposite consisting of a few layers of graphene (FLG) and tin dioxide (SnO₂) was prepared by ultrasound-assisted synthesis. The uniform SnO₂ nanoparticles (NPs) on the FLG were characterized by X-ray diffraction in terms of lattice and phase structure. The functional groups present in the composite were analyzed by FTIR. Electron microscopy (HR-TEM and FE-SEM) was used to study the morphology. The effect of the fraction of FLG present in the nanocomposite was investigated. Sensitivity, selectivity and reproducibility towards resistive sensing of liquid propane gas (LPG) was characterized by the I-V method. The sensor with 1% of FLG on SnO₂ operated at a typical voltage of 1 V performs best in giving a rapid and sensitive response even at 27 °C. This proves that the operating temperature of such sensors can be drastically decreased which is in contrast to conventional metal oxide LPG sensors.

Open image in new window

Graphical abstract Schematic of a room temperature gas sensor for liquefied petroleum gas (LPG). It is based on the use of a few-layered graphene (1 wt%)/SnO₂ nanocomposite that was deposited on an interdigitated electrode (IDEs). A sensing mechanism for LPG detection has been established.

     

Unsteady flamelet/progress variable approach for non-premixed turbulent lifted flames

The unsteady flamelet/progress variable approach has been developed for the prediction of a lifted flame to capture the extinction and re-ignition physics. In this work inclusion of the time variant behavior in the flamelet generation embedded in the large eddy simulation technique, allows better understanding of partially premixed flame dynamics. In the process sufficient simulations to generate unsteady laminar flamelets are performed, which are a function of time. These flamelets are used for the generation of the look-up table and the flamelet library is produced. This library is used for the calculation of temperature and other species in the computational domain as the solution progresses. The library constitutes filtered quantities of all the scalars as a function of mean mixture fraction, mixture fraction variance and mean progress variable. Mixture fraction and progress variable distributions are assumed to be β-PDF and δ-PDF respectively. The technique used here is known as the unsteady flamelet progress variable (UFPV) approach. One of the well known lifted flames is considered for the present modeling which shows flame lift-off. The results are compared with the experimental data for the mixture fraction and temperature. Lift off height is predicted from the numerical calculations and compared with the experimentally given value. Comparisons show a reasonably good agreement and the UFPV combustion model appears to be a promising technique for the prediction of lifted and partially premixed flames.     

Surface modification and grafting of carbon fibers: A route to better interface

This review is an audit of various Carbon fibers (CF) surface modification techniques that have been attempted and which produced results with an enhancement in the interfacial characteristics of CFRP systems. An introduction to the CF surface morphology, various techniques of modifications, their results and challenges are discussed here. CFs are emerging as the most promising materials for designing many technologically significant materials for current and future generations. In order to extract all the physic-mechanical properties of CF, it is essential to modulate a suitable environment through which good interfacial relation is achieved between the CF and the matrix. The interface has the utmost significance in composites and hybrid materials since tension at the interface can result in a deterioration of the fundamental properties. This review is aimed to provide a detailed understanding of the CF structure, its possible ways of modification, and the influence of interfacial compatibility in physic-mechanical and tribological properties. Both physical and chemical modifications are illustrated with specific examples, in addition to the characterization methods. Overall, this article provides key information about the CF based composite fabrication and their many applications in aerospace and electronics- where light weight and excellent mechanical strength are required.     

Effect of molecular interactions on the performance of poly(isobutylene-co-isoprene)/graphene and clay nanocomposites

Poly(isobutylene-co-isoprene) (IIR)/graphene and cloisite10A nanocomposites were prepared successfully and the resulting mechanical, rheological and barrier properties were carefully evaluated and compared. Chemical treatments like maleic anhydride grafting were used to improve the dispersion of the clay in the IIR matrix. Blends with different loading (20, 40, 60, and 80 %) of maleic anhydride grafted poly(isobutylene-co-isoprene) (MA-g-IIR) and IIR were made to maintain a balance between the beneficial polarity induced by MA grafting and the inevitable decrease in molecular weight (due to chain scission) induced by the free radical grafting process. The highest moduli, tensile strength and elongation at break were achieved in the case of a 60:40 ratio of MA-g-IIR (grafting degree 0.75)/IIR mixture with 5 phr of cloisite 10A. IIR/graphene nanocomposites exhibited higher reinforcement (Young’s moduli) and lower gas permeability compared to the optimized clay nanocomposites with same weight percentage. The filler–elastomer and filler–filler interactions deduced from rheology, stress relaxation and Payne effect experiments emphasize the reinforcing ability in IIR/graphene and MA-g-IIR/clay. XRD, SEM and TEM results further substantiated the results from the obtained micro structure of the nanocomposites. The improved performances of IIR/MA-g-IIR/clay and IIR/graphene were successfully correlated with interactions between the filler platelets and elastomer chains occurring in the nanocomposites.     

White graphene reinforced polypyrrole and poly(vinyl alcohol) blend nanocomposites as chemiresistive sensors for room temperature detection of liquid petroleum gases

Microchimica Acta - The authors describe the preparation of PVA/WPPy/hBNNP nanocomposite films by solution casting method from poly(vinyl alcohol) (PVA), water soluble polypyrrole (WPPy), and using...