Measurement of storage time, estimation of ion number and study of absorption line profile in a Paul trap

Europium (Eu⁺) ions were confined in a Paul trap and detected by non-destructive method. Storage time of Eu⁺ ions achieved in vacuum was improved by orders of magnitude employing buffer gas cooling. The experimentally detected signal was fitted to the ion response signal and the total number of ions trapped was estimated. It is found that the peak signal amplitude as well as the product of FWHM and the peak signal amplitude is proportional to the total number of trapped ions. The trapped ion secular frequency was swept at different rates and its effect on the absorption line profile was studied both experimentally and theoretically.     

Radiation induced synthesis and swelling characterization of thermo-responsive N-isopropylacrylamide-co-ionic hydrogels

Two-component thermo-responsive hydrogels poly(N-isopropylacrylamide)-co-vinylbenzyltrimethylammonium chloride (NIPA-co-VBT) and poly(N-isopropylacrylamide)-co-p-sodium styrene sulphonate (NIPA-co-SSS) were prepared by using high energy gamma radiation. The gels were characterized by Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and sol-gel analysis. The presence of ionic monomers in NIPA leads to lower gel content. Introduction of ionic components in the matrix enhanced swelling extent but caused slower volume transition. The swelling studies in alcohol indicated that swelling extent was function of polarity of the swelling medium and all gels followed the order water > methanol > ethanol > iso-propanol. In mixed co-solvents (water-alcohol), they exhibit complex reentrant behavior. The co-polymer gels containing VBT swelled faster and to higher extent than those containing SSS. The dynamic swelling studies indicated that diffusion of water in PNIPA gel shifts from Fickian for PNIPA to anomalous for NIPA-co-ionic gels also the mean swelling time (MST) decreases for gels containing ionic monomers.     

Positron annihilation studies of poly(N‐isopropyl acrylamide) gel in mixed solvents

Positron annihilation lifetime spectroscopy was used to characterize the reentrant volume‐phase‐transition behavior of poly(N‐isopropyl acrylamide) hydrogel in an ethanol/water mixed solvent. The polymer gel was synthesized with γ irradiation. The ortho‐positronium lifetime (τ₃) in the gel slowly increased with an increase in the ethanol content in the mixed solvent. τ₃ was not influenced by the volume phase transition. The ortho‐positronium intensity decreased with the collapse of the gel in an approximately 10% ethanol/water mixture. When swelled in pure ethanol, τ₃ initially increased with the solvent amount in the gel, showing the destruction of intramolecular hydrogen bonding and the relaxation of polymer chains. The lower critical solution temperature of the gel in the 10% ethanol/water mixture was lower than that in pure water, and τ₃ for various solvent contents showed behavior similar to that seen in pure solvent. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1028–1036, 2002     

Thermal degradation behavior of radiation synthesized polydiallyldimethylammonium chloride

Thermogravimetric analysis (TGA) and differential scanning calorimetric (DSC) studies were carried out on gamma radiation synthesized polydiallyldimethylammonium chloride (PDADMAC). The polymer was found to undergo thermal degradation in two stages. The first stage showed a weight loss of 33% and the second stage showed a weight loss of 67%. The DSC thermogram shows two endothermic peaks corresponding to the two stages in the TG thermogram and the experimental enthalpy change associated with the first and second stages were 650 J g⁻¹ and 129.5 J g⁻¹, respectively. The nth-order kinetic parameters (order of the reaction, activation energy and the pre-exponential factor) were determined from a single dynamic DSC or thermogravimetric (TG) thermogram by the method of least square. Theoretical TG/differential thermogravimetric (DTG) and DSC thermograms derived from the calculated kinetic parameters were in good agreement with the experimental ones at the heating rate employed. However, the kinetic parameters determined using TG and DSC were different. This leads to the conclusion that the degradation mechanism could be complicated and may consists of a number of parallel or consecutive reactions. The glass transition temperature (T_g) of the polymer was found to be around 150 °C depending on the test method employed.     

Radiation Processed Styrene-Butadiene Rubber/Ethylene-Propylene Diene Rubber/Multiple-Walled Carbon Nanotubes Nanocomposites: Effect of MWNT Addition on Solvent Permeability Behavior

Different compositions of SBR/EPDM 50:50 blends containing multiple-walled carbon nanotubes (MWNT) as nanoparticulate fillers (0.5%–10%) were evaluated for radiation sensitivity and solvent permeability. The efficiency of radiation ***cross-linking was analyzed by gel-content and Charlesby–Pinner parameter measurements. ***Gamma-radiation-induced cross-linking extent was found to increase with radiation dose and MWNT concentration, which was reflected in different extents of swelling. Rigorous analysis of swelling and diffusion data, on the basis of the transport exponent (n) values and diffusion/relaxation rate indicated anomalous diffusion behavior for most of the nanocomposites. The swelling extent in different solvents was found to be a function of polymer-solvent interaction as well as stearic hindrance due to the structure/size of the solvent molecules. Polymer-filler interaction investigated by a Kraus plot indicated high reinforcement of the SBR/EPDM matrix on MWNT addition. There was no significant change in surface energy or hydrophilicity of the SBR/EPDM matrix on introduction of MWNT into it.     

Material consideration for the growth of scintillation grade NaI(Tl) crystals

The starting material for any crystal growth contains a number of impurities. The level of an impurity affecting a particular property of the crystal varies from one impurity to another. We report here the effect of some select impurities usually present in NaI material on its growth and scintillation response.     

Aziridine carboxylate from D-glucose: synthesis of polyhydroxylated piperidine, pyrrolidine alkaloids and study of their glycosidase inhibition

The D-glucose derived aziridine carboxylate 5 was obtained from (E)-ethyl-6-bromo-1,2-O-isopropylidene-3-O-benzyl-5-deoxy-alpha-D-xylo-5-eno-heptofuranuronate 4 through conjugate addition of benzylamine and in situ intramolecular nucleophilic expulsion of bromine. The regioselective aziridine ring-opening, using water as a nucleophile, resulted in the alpha-hydroxy-beta-aminoester 6, which was exploited in the synthesis of six and five membered azasugars 1b/1c and 2b/2c, respectively. The glycosidase inhibitory activity of the title compounds was evaluated.     

Phase formation and crystallization in Bi-Sr-Ca-Cu-O thick films

Thick films of Bi₂Sr₂CaCu₂O_x superconducting at 84 K have been prepared on polycrystalline MgO substrates. The effect of heat treatment on phases formed at various stages of the film preparation is studied. Investigations show that a thin layer at the top is highly oriented while the bulk of the 212 phase material beneath it consists of randomly oriented grains. This appears to be the main reason for the low critical current densities obtained in practice.     

Elution profiles of lanthanides with α‐hydroxyisobutyric acid by ion exchange chromatography using fine resin

Experiments were carried out using a strong acid cation exchange resin with a particle size of 75–150 μm, termed as “fine resin” in hydrogen ion form for the elution of individual lanthanides Sm, Eu, Gd, Tb, and Dy that are produced as fission products in the spent nuclear fuel and generated in the effluent during reprocessing of spent nuclear fuel. Batch experiments were carried out to study the effect of concentration of nitric acid on distribution coefficient. The distribution coefficient values for these individual lanthanides were determined in nitric acid medium in the concentration range of 0.01–4.0 N. Uptake of each individual lanthanide by resin was increased with increased nitric acid concentration from 0.01 to 0.5 N and remained similar from 0.5 to 1.0 N and decreased thereafter up to 4.0 N. Column experiments were also carried out using the same resin to study the parameters like pH of the eluent, flow rate, and resin bed height under isocratic elution conditions for eluting lanthanide elements using α‐hydroxyisobutyric acid as eluent. The results of this study have indicated the possibility for the elution of individual lanthanides.