Investigation of the drying conditions for amidosulfuric acid.

The drying conditions for primary standards of volumetric analysis have a significant effect on the titration results due to changes in the purity, stability and homogeneity. Amidosulfuric acid, a strong acid used as a reference material for volumetric analysis in Japan, was dried in a vacuum desiccator or heated at different temperatures, and then measured by Karl-Fischer titration, thermogravimetry/mass spectroscopy (TG-MS), ion chromatography and coulometric titration. The optimum drying conditions were at 50 degrees C for 24 h with crushing.     

Total Synthesis of Natural PI-091, a New Platelet Aggregation Inhibitor of Microbial Origin

The total synthesis of a new platelet aggregation-inhibiting gamma-lactam PI-091 (1) gave a 1:1 diastereomeric mixture at the gamma-ketal carbon. The high-yielding aldol reaction of an appropriately protected 1,3,4-trihydroxy-4-methyldecan-2-one 42, prepared from D-glucose, with the kinetically generated enolate of 3-methyl-2-butanone provided 43. The resulting diastereomeric mixture of the aldol adduct 43 was converted to a 2,4-alkylated furan 45 via an intramolecular ketalization followed by dehydration. The addition of a singlet oxygen to the alpha-trimethylsilylated furan 48derived from 45 under photochemical conditions efficiently provided an alpha,gamma-dialkylated gamma-hydroxy gamma-lactone 47. The transformation of methyl ketal 52 prepared from 47 into gamma-hydroxy gamma-lactam 53 was achieved by exposure to liquid ammonia in MeOH. The total synthesis of 1 was achieved from 52 through the Dess-Martin periodinane oxidation of the secondary hydroxy group in the side chain. The present total synthesis revealed that the stereogenic carbon center in the side chain in natural 1 is S.     

Optical microscopy and in situ Raman scattering of single crystalline ethylene hydrate and binary methane-ethylene hydrate at high pressures

Visual observations through a microscope and in situ Raman measurements have been made for single crystalline ethylene hydrate (EH) and binary methane-ethylene hydrate (MEH) at pressures up to 3.7 GPa and room temperature. Both hydrates showed pressure-induced phase transitions at 1.6, 2.0, and 3.0 GPa for EH and at 1.7, 2.1, and 3.3 GPa for MEH. The cubic sI phase of EH and MEH remains stable up to 1.6 and 1.7 GPa, respectively, which are more widely ranging values than the values for the methane hydrate sI phase. In this sI phase of binary MEH, the cage occupancies by methane and ethylene molecules are investigated from Raman spectra. Above P = 3.0 GPa for EH and 3.3 GPa for MEH, they decomposed by associating with the formation of the polyethylene.     

Enantiodifferentiating photoaddition of alcohols to 1,1-diphenylpropene in supercritical carbon dioxide: sudden jump of optical yield at the critical density

In the enantiodifferentiating photoaddition of ROH (R = Me, Et, i-Pr) to 1,1-diphenylpropene sensitized by fructosyl 1,4-naphthalenedicarboxylate in supercritical carbon dioxide, the enantiomeric excess of photoadduct increased with increasing bulkiness of the alcohol at all pressures used, with an accompanying sudden jump at the critical density, for which the enhanced clustering of alcohol, particularly in the subcritical pressure region, was revealed to be responsible from the fluorescence spectral examinations.     

1,4‐Bis[2‐(4‐ferrocenylphenyl)ethynyl]anthraquinone from synchrotron X‐ray powder diffraction

The title compound, [Fe₂(C₅H₅)₂(C₄₀H₂₂O₂)] or 1,4‐(FcPh)₂Aq [where FcPh is 2‐(4‐ferrocenylphenyl)ethynyl and Aq is anthraquinone], was synthesized in an attempt to obtain a new solvent‐incorporating porous material with a large void space. Thermodynamic data for 1,4‐(FcPh)₂Aq show a phase transition at approximately 430 K. The crystal structure of solvent‐free 1,4‐(FcPh)₂Aq was determined at temperatures of 90, 300 and 500 K using synchrotron powder diffraction data. A direct‐space method using a genetic algorithm was employed for structure solution. Charge densities calculated from observed structure factors by the maximum entropy method were employed for model improvement. The final models were obtained through multistage Rietveld refinements. In both phases, the structures of which differ only subtly, the planar Aq fragments are stacked alternately in opposite orientations, forming a one‐dimensional column. The FcPh arms lie between the stacks and fill the remaining space, leaving no voids. C—H...π interactions between the Ph and Fc fragments mediate crystal packing and stabilization.     

Selective nucleophilic additions to poly(methacrylate)s containing isothiocyanate moieties in the side chains and their application in cross‐linking

Reactivity of isothiocynate moieties in the side chain of polymethacrylate with amine, alcohol, or thiol was investigated, and the reactions were applied to preparation of networked polymers. Isothiocyanate of polymer side chain rapidly reacted with amines without a catalyst, to give the corresponding thioureas. However, it did not react with alcohols or thiols under the same conditions. Using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as a catalyst, addition of alcohols or thiols to the isothiocyanate proceeded smoothly. Addition of amines, alcohols, and thiols to isothiocyanates moiety contained in the side chain of polymethacrylate also proceeded readily with or without the catalyst, respectively, to effectively give the corresponding side chain modified polymers. Occurrence of these additions was confirmed by ¹H NMR and IR measurements. Glass transition temperatures and thermal decomposition temperatures of the obtained polymers were investigated by differential scanning calorimetry and thermogravimetric analysis. Networked polymers were easily prepared by addition of 1,6‐hexamethylenediamine or hexamethylene glycol to the polymethacrylate having isothiocyanato groups. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1832–1842     

Design and synthesis of 2-(1,3-dialkoxy-2-methylpropan-2-yl)-1,3-diarylpropanes as tethering units for folded H-stacking polymers

1,3-Diarylpropenes 9 having a 1,3-dialkoxy-2-methylpropan-2-yl group were designed as tethering monomers for folded H-stacking polymers, and were readily synthesized from 2-ethoxymethylidene malonate in four- or five-steps, including a facile sequential addition–elimination–addition reaction of benzyl zinc reagents. The preference for the closed (stacked) conformation in the resulting 2-substituted 1,3-diarylpropanes 9 was evaluated using MM2 calculations, ¹H NMR analyses, and fluorescence measurements. Copolymerization of the resulting monomers 9 with compounds containing π-units provided polymers with blue-shifted UV-absorptions both in solution and as films, compared with that of a model compound containing a single π-unit. This optical property is unique to H-aggregated π-units.