Effect of humidity on the adsorption kinetics of lung surfactant at air-water interfaces

The in vitro adsorption kinetics of lung surfactant at air-water interfaces is affected by both the composition of the surfactant preparations and the conditions under which the assessment is conducted. Relevant experimental conditions are surfactant concentration, temperature, subphase pH, electrolyte concentration, humidity, and gas composition of the atmosphere exposed to the interface. The effect of humidity on the adsorption kinetics of a therapeutic lung surfactant preparation, bovine lipid extract surfactant (BLES), was studied by measuring the dynamic surface tension (DST). Axisymmetric drop shape analysis (ADSA) was used in conjunction with three different experimental methodologies, i.e., captive bubble (CB), pendant drop (PD), and constrained sessile drop (CSD), to measure the DST. The experimental results obtained from these three methodologies show that for 100% relative humidity (RH) at 37 degrees C the rate of adsorption of BLES at an air-water interface is substantially slower than for low humidity. It is also found that there is a difference in the rate of surface tension decrease measured from the PD and CB/CSD methods. These experimental results agree well with an adsorption model that considers the combined effects of entropic force, electrostatic interaction, and gravity. These findings have implications for the development and evaluation of new formulations for surfactant replacement therapy.     

CAROTENOID-TO-BACTERIOCHLOROPHYLL SINGLET ENERGY TRANSFER IN CAROTENOID-INCORPORATED B850 LIGHT-HARVESTING COMPLEXES OF Rhodobacter sphaeroides R-26.1

Four carotenoids, 3,4,7,8-tetrahydrospheroidene, 3,4,5,6-tetrahydrospheroidene, 3,4-dihydrospheroidene and spheroidene, have been incorporated into the B850 light-harvesting complex of the carotenoidless mutant, photosynthetic bacterium, Rhodobacter sphaeroides R-26.1. The extent of π-electron conjugation in these molecules increases from 7 to 10 carbon-carbon double bonds. Carotenoid-to-bacteriochlorophyll singlet state energy transfer efficiencies were measured using steady-state fluorescence excitation spectroscopy to be 54 ± 2%, 66 ± 4%, 71 ± 6% and 56 ± 3% for the carotenoid series. These results are discussed with respect to the position of the energy levels and the magnitude of spectral overlap between the S, (2′AJ state emission from the isolated carotenoids and the bacteriochlorophyll absorption of the native complex. These studies provide a systematic approach to exploring the effect of excited state energies, spectral overlap and excited state lifetimes on the efficiencies of carotenoid-to-bacteriochlorophyll singlet energy transfer in photosynthetic systems.     

Chemical and thermal stability of alkanethiol and sulfur passivated InP(100)

InP(100) surfaces treated with Na2Sx9H20 and CnH(2n+1)SH are examined by contact angle measurement, X-ray photoelectron spectroscopy, and atomic force microscopy to determine the chemical and thermal behavior of these passivated surfaces. The surfaces coated by octadecanethiol (n = 18) self-assembled monolayers (SAMs) are found to be more stable toward oxidation than the S-passivated surface. The chemical stability of octadecanethiol SAMs in various environments is examined. The thiol monolayer is found to be stable in 0.1 M HCl but degrades in 0.1 M NaOH, boiling chloroform, and water. The behavior of these surfaces at elevated temperatures under a vacuum is also investigated. The octadecanethiol-coated InP(100) is stable up to 473 K, above which the films begin to degrade. Unlike other substrates on which the entire molecule including the sulfur headgroup desorbs together, on InP, the sulfur headgroup remains on the surface even after annealing to 673 K. These observations suggest that the desorption occurs by S-C bond cleavage as well as In-S bond cleavage. The sulfur of S-passivated InP is found to be more thermally stable than that of the octadecanethiol monolayer, perhaps due to their different bonding geometries and hence energies.     

One Pot Synthesis of Octahydroquinazolinone Derivatives Using (Me (Im)<Superscript>12</Superscript>) H<Subscript>4</Subscript>CuPW<Subscript>11</Subscript>O<Subscript>39</Subscript> as a Surfactant Type Catalyst

This study is aimed at proposing a practical green procedure for the synthesis of octahydroquinazolinone derivatives using benzaldehyde, dimedone and urea under microwave irradiation in water. A surfactant type polyoxometalate-based organic–inorganic hybrid was able to efficiently catalyze this synthesis. The catalyst was prepared and characterized by Fourier transform infrared, UV–Vis, X-ray diffraction, and thermogravimetric analysis. The employed catalyst exerted a synergistic effect; the anion part acted as a catalyst while the cation part acted as a surfactant in order to increase the concentration of organic reactants in water. The main advantage of this method is its remarkable yield in short reaction periods, which results in the rendering of products with high purity. Moreover, this heterocatalyst is capable of being easily recovered and reused several times. The influences of reaction conditions were studied systematically, and a possible catalysis mechanism was proposed for understanding the highly efficient heterogeneous catalytic behavior.     

A New Reaction of Isatin,Cyclic 1,3‐Diketone,and 2‐Cyanoacetamide: A Four‐Component Synthesis of Spirooxindoles

A novel reaction of isatins, 2‐cyanoacetamide, and cyclic 1,3‐diketones in ethanol was reported. The reaction gave the unexpected spirooxindole ethyl carboxylates in excellent yields and the spirooxindole carboxamide was not observed.     

Zinc‐containing ionic liquid as a dual solvent‐catalyst in base‐free condensations under ultrasonic irradiation

In this study, natural‐based ionic liquid (IL) using caffeine (Caff), trietahnolamine (TEA) and ZnBr₂, [Caff‐TEA]⁺[ZnBr₃]^?, which features high catalytic activity and environmentally‐friendly nature was synthesized with melting point of 76 °C by a facile method. The synthesized [Caff‐TEA]⁺[ZnBr₃]^? has high catalytic activity as both of catalyst and solvent in condensation reactions for the synthesis of benzylidenes, bis‐hydroxyenones and xanthenes. Synthesized IL was characterized by proton nuclear magnetic resonance (¹HNMR), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD) and Energy‐dispersive X‐ray spectroscopy (EDX) analysis. Also synthesized heterocycles were characterized by FT‐IR, proton nuclear magnetic resonance (¹HNMR) and carbon nuclear magnetic resonance (¹³CNMR).     

Novel palladium nanoparticles supported on β‐cyclodextrin@graphene oxide as magnetically recyclable catalyst for Suzuki–Miyaura cross‐coupling reaction with two different approaches in bio‐based solvents

A novel nanocatalyst was designed and prepared. Initially, the surface of magnetic graphene oxide (M‐GO) was modified using thionyl chloride, tris(hydroxymethyl)aminomethane and acryloyl chloride as linkers which provide reactive C═C bonds for the polymerization of vinylic monomers. Separately, β‐cyclodextrin (β‐CD) was treated with acryloyl chloride to provide a modified β‐CD. Then, in the presence methylenebisacrylamide as a cross‐linker, monomers of modified β‐CD and acrylamide were polymerized on the surface of the pre‐prepared M‐GO. Finally, palladium acetate and sodium borohydride were added to this composite to afford supported palladium nanoparticles. This fabricated nanocomposite was fully characterized using various techniques. The efficiency of this easily separable and reusable heterogeneous catalyst was successfully examined in Suzuki–Miyaura cross‐coupling reactions of aryl halides and boronic acid as well as in modified Suzuki–Miyaura cross‐coupling reactions of N‐acylsuccinimides and boronic acid in green media. The results showed that the nanocatalyst was efficient in coupling reactions for direct formation of the corresponding biphenyl as well as benzophenone derivatives in green media based on bio‐based solvents. In addition, the nanocatalyst was easily separable, using an external magnet, and could be reused several times without significant loss of activity under the optimum reaction conditions.     

Sulfonic acid-functionalized Fe3O4-supported magnetized graphene oxide quantum dots: A novel organic-inorganic nanocomposite as an efficient and recyclable nanocatalyst for the synthesis of dihydropyrano[2,3-c]pyrazole and 4H-chromene derivatives

In this research, the main emphasis has been focused on the preparation of a novel Fe₃O₄-supported propane-1-sulfonic acid-grafted graphene oxide quantum dots (Fe₃O₄@GOQD-O-(propane-1-sulfonic acid)) that it was readily synthesized via a five-step procedure as a hitherto unreported magnetic nanocatalyst. This newly prepared Fe₃O₄@GOQD-O-(propane-1-sulfonic acid) nanocomposite was structurally well-established by different analytical techniques including Fourier transform infrared (FT-IR), X-ray diffraction (XRD), energy-dispersive X-ray (EDX), thermal gravimetric analysis (TGA), field emission gun-scanning electron microscope (FESEM), high-resolution transmission electron microscopy (HRTEM) and vibrating sample magnetometer (VSM) analyses. The high catalytic performance of this nanocomposite was exhibited in one-pot synthesis of dihydropyrano[2,3-c]pyrazole and 4H-chromene derivatives under mild conditions. Low reaction times, excellent yields of the products, benignity of the catalyst, easy reaction work-up and magnetic recyclability of the catalyst are the main advantages of the present protocol. Also, our research indicated that the Fe₃O₄@GOQD-O-(propane-1-sulfonic acid) could be reused up to five times without considerable loss of catalytic activity.     

Copper-immobilized ionic liquid as an alternative to organic solvents in the one-pot synthesis of bioactive dihydropyrano[2,3-c]pyrazole derivatives

In this study, a novel Cu-immobilized ionic liquid (IL)was designed, characterized, and employed as both promoter and solvent in the synthesis of some dihydropyrano[2,3-c]pyrazoles. The synthesized ionic liquid was characterized by ¹H NMR, ¹³C NMR, FTIR, ICP and EDX analysis and showed high catalytic activity to proceed the synthesis of bioactive dihydropyrano[2,3-c]pyrazole derivatives. This method has the advantage of using the IL as a green medium for the synthesize of the products in high to excellent yields within short reaction times.     

One‐Pot Synthesis of Dialkyl 2‐(Alkyl or aryl)‐6‐(pyrimidin‐2‐ylthio)‐4‐thioxo‐5,6‐dihydro‐4H‐1,3‐oxazine‐5,6‐dicarboxylate Derivatives via a Four‐Component Reaction

A number of new dialkyl 2‐(alkyl or aryl)‐6‐(pyrimidin‐2‐ylthio)‐4‐thioxo‐5,6‐dihydro‐4H‐1,3‐oxazine‐5,6‐dicarboxylate have been prepared in good yield from the multicomponent reaction between 2‐mercaptopyrimidines and acetylenic diesters with acetyl or benzoyl isothiocyanate.