Properties of ITO films prepared by reactive magnetron sputtering

Indium tin oxide (ITO) thin films were deposited by mid frequency pulsed dual magnetron sputtering using a metallic alloy target with 10 wt.% tin in an atmosphere of argon and oxygen. The aim of the work was to study the interdependence of structural, electrical and optical properties of ITO films deposited in the reactive and transition target mode, respectively. The deposition rate in the transition mode exceeds the deposition rate in the reactive mode by a factor of six, a maximum value of 100 nm·m min⁻¹ could be achieved. This corresponds to a static deposition rate of 200 nm min⁻¹. The lowest electrical resistivity of 1.1·10⁻³ Ω cm was measured at samples deposited in the high oxygen flow range in the transition mode. The samples show a good transparency in the visible range corresponding to extinction coefficients being below 10⁻². X-ray diffraction was used to characterise crystalline structure as well as film stress. ITO films prepared in the transition mode show a slightly preferred orientation in (211) direction, whereas films deposited in the reactive mode are strongly (222) oriented. Compared to undoped In₂O₃ all samples have an enlarged lattice. The lattice strain perpendicular to the surface is about 0.8% and 2.0% for films grown in the transition and the reactive mode, respectively. Deposition in the transition mode introduces a biaxial film stress in the range of −300 MPa, while stress in reactive mode samples is −1500 MPa.     

Electronic Structure and Photophysical Properties of Isoindole and its Benzo[f]- and Dibenzo[e,g]-Derivatives

The synthesis of N-methyl-benz[f]isoindole ( 2 ) and N-methyl-dibenz[e,g]isoindole ( 3 ) is reported. The NMR. spectra of N-methyl-isoindole ( 1 ) and of 2 have been analysed and the implications concerning the alternation of bond lengths are discussed. The photophysical properties of 1 to 3 have been investigated by the following methods: HeI photoelectron (PE.) spectroscopy, UV./VIS. absorption (polarization measurements by the stretched-foil technique) and emission spectroscopy (fluorescence spectra, lifetimes and quantum yields, phosphorescence spectra), and flash spectroscopy (triplet-triplet absorption spectra). The discussion of the results is based on HMO. and PPP SCF CI. calculations and points to the relationship between the heterocycles 1 to 3 and the corresponding benzenoid hydrocarbons obtained by replacement of the ? NMe? subunit by ? CH?CH? . Some comments concerning the ground state properties of isoindole and related compounds are derived from the analysis of their electronic structure.     

Electronic Structure and Photophysical Properties of Planar Conjugated Hydrocarbons with 4n-Membered Rings. I. Photoelectron Spectra of 1,5,9-Tridehydro[12]-annulene and Related Compounds

The HeI photoelectron spectra of the title compound 1 (1,5,9-cyclododecatriene-3,7,11-triyne), 1,5-didehydro[12]annulene (1,3,5,9-cyclododecatetraene-7, 11-diyne ( 2 )), sym-tri-benzotridehydro[12]annulene (tribenzo[a,e,i]-5,6,11,12,17,18-hexadehydrocyclododecene ( 3 )), and sym-dibenzodidehydro[8]annulene (dibenzo[a,e]-5,6,11,12-tetradehydrocyclooctene ( 4 )) have been recorded and analysed on the basis of various semi-empirical model calculations. Despite the distinct bond length alternation in the parent compounds and, apparently, in the radical cations, the first ionization occurs at low energies in these compounds (7.6 ± 0.2 eV). The spectra yield little information with regard to the transannular interactions of the triple bonds.     

The N1s ESCA Spectrum of Protonated 1,8-Bis-(Dimethylamino) Naphthalene (“proton sponge”)

The ESCA spectrum of protonated 1,8-bis-(dimethylamino) naphthalene (“proton sponge”) (I) has been recorded in the region of N1s binding energies. The results indicate that IH⁺ possesses an unsymmetrical N? H…?N hydrogen bridge.     

Highly efficient recycling of a "sandwich" type polyoxometalate oxidation catalyst using solvent resistant nanofiltration

A "sandwich" type polyoxometalate catalyst ([MeN(n-C8H17)3]12[WZn3(ZnW9O34)2]) was very efficiently recycled by nanofiltration with almost quantitative retention, using an alpha-alumina supported mesoporous gamma-alumina membrane.     

The Azo(Azoxy) Functionality as a π2 Component in Photo [2+2] cycloadditions ‘syn’- and ‘anti’-3,4-diazatricyclo[4.2.2.22,5]dodeca-3,7-diene,syntheses, photolyses,X-ray-structure analysis,and PE spectra

The propensity of the N?N bond to undergo photo [2 + 2] cycloadditions has been further explored. In the specifically designed 1,5-azo/enes 1–3 , no [2 + 2] cycloaddition has been observed upon either direct or sensitized excitation with light of various wave lengths at temperatures down to 77 K, in line with expectations based on X-ray ( 1 : d = 2.71 Å, ω = 129°) and PE measurements ( 1 : I₁ = 8.0₀, I₂ = 9.0₅ eV; 2 ; I₁ = 8.0₀, I₂ = 9.2₅eV). The steric/stereoelectronic demands for the participation of the N?N bond in pericyclic reactions are clearly more stringent than those for the C?C bond.     

Direct aerobic epoxidation of alkenes catalyzed by metal nanoparticles stabilized by the H5PV2Mo10O40 polyoxometalate

Ag and Ru nanoparticles stabilized by H5PV2Mo10O40, prepared by a sequence of redox reactions and supported on alpha-alumina, were effective catalysts for the direct aerobic epoxidation of alkenes in the liquid phase.     

Chiral hydroperoxides as oxygen source in the catalytic stereoselective epoxidation of allylic alcohols by sandwich-type polyoxometalates: control of enantioselectivity through a metal-coordinated template

The epoxidation of allylic alcohols is shown to be efficiently and selectively catalyzed by the oxidatively resistant sandwich-type polyoxometalates, POMs, namely [WZnM(2)(ZnW(9)O(34))(2)](q)(-) [M = OV(IV), Mn(II), Ru(III), Fe(III), Pd(II), Pt(II), Zn(II); q = 10-12], with organic hydroperoxides as oxygen source. Conspicuous is the fact that the nature of the transition metal M in the central ring of polyoxometalate affects significantly the reactivity, chemoselectivity, regioselectivity, and stereoselectivity of the allylic alcohol epoxidation. For the first time, it is demonstrated that the oxovanadium(IV)-substituted POM, namely [ZnW(VO)(2)(ZnW(9)O(34))(2)](12-), is a highly chemoselective, regioselective, and also stereoselective catalyst for the clean epoxidation of allylic alcohols. A high enantioselectivity (er values up to 95:5) has been achieved with [ZnW(VO)(2)(ZnW(9)O(34))(2)](12)(-) and the sterically demanding TADOOL-derived hydroperoxide TADOOH as regenerative chiral oxygen source. Thus, a POM-catalyzed asymmetric epoxidation of excellent catalytic efficiency (up to 42 000 TON) has been made available for the development of sustainable oxidation processes. The high reactivity and selectivity of this unprecedented oxygen-transfer process are mechanistically rationalized in terms of a peroxy-type vanadium(V) template.     

An efficient, catalytic, aerobic, oxidative iodination of arenes using the H5PV2Mo10O40 polyoxometalate as catalyst

Iodination of arenes was carried out by reacting 1 equiv of arene substrate with 0.5 equiv of iodine under an oxygen atmosphere with H5PV2Mo10O40 as oxidation catalyst. The synthesis is an inherently waste-free method for the preparation of iodoarenes.     

Mild, aqueous, aerobic, catalytic oxidation of methane to methanol and acetaldehyde catalyzed by a supported bipyrimidinylplatinum-polyoxometalate hybrid compound

We have demonstrated that a bipyrimidinylplatinum-polyoxometalate, [Pt(Mebipym)Cl2]+[H4PV2Mo10O40]-, supported on silica is an active catalyst for the aerobic oxidation of methane to methanol in water under mild reaction conditions. Further oxidation of methanol yields acetaldehyde. The presence of the polyoxometalate is presumed to allow the facile oxidation of a Pt(II) intermediate to a Pt(IV) intermediate and to aid in the addition of methane to the Pt catalytic center.