The thermal stability and measurement temperature dependence of Schottky contact characteristics on n-GaN using a W2B5/Ti/Au metallization scheme was studied using current-voltage (I-V), scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) measurements. The elemental profile obtained from samples annealed at 350 °C showed some titanium diffusion into the gold layer but little other difference from the as-deposited wafer. Annealing at 700 °C produced significant diffusion of titanium. The Schottky barrier height increased with anneal temperature up to 200 °C, reaching a maximum value of 0.65 eV, but decreased at higher annealing temperatures. The reverse breakdown voltage from diodes fabricated using the W2B5-based contacts showed a similar dependence. The reverse current magnitude was larger than predicted by thermionic emission alone. The barrier height showed only minor changes with measurement temperature up to 150 °C. 相似文献
Conductivity, viscosity, turbidity, and NMR measurements were performed over most of the mole fraction range for sodium deoxycholate (SDC) with hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl). All studies demonstrate that the mixed-micelle formation is more favorable in SDC plus HTAB rather than SDC plus HPyBr or SDC plus HPyCl mixtures. The results showed that the bulky pyridinium head groups of HPyBr or HPyCl create steric incompatibility with rigid SDC monomers in the mixed state. 相似文献
Conductivity (kappa), turbidity (tau), and fluorescence (I1/I3) studies of hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl) in aqueous poly(amido amine) (PAMAM) dendrimers of generations 0 to 2.5 G have been carried out. The complexation of surfactant monomers with the PAMAM surface groups is demonstrated by the critical aggregation concentration (cac), which is two to three orders of magnitude less than the micellization of cationic surfactants in aqueous PAMAM and denoted by critical micelle concentration (cmc*). In the presence of aqueous amine-terminated PAMAM, the cmc* value for each surfactant was much lower than the cmc in pure water, while they remain close to each other in the presence of aqueous ester-terminated PAMAM for each surfactant. The fluorescence studies demonstrated that both amine- and ester-terminated PAMAM interact with the cationic surfactants, though the mode of interaction varied due to the different nature of surface groups. 相似文献
Ageratum conyzoides L. (Family—Asteraceae) is an annual aromatic invasive herb, mainly distributed over the tropical and subtropical regions of the world. It owns a reputed history of indigenous remedial uses, including as a wound dressing, an antimicrobial, and mouthwash as well as in treatment of dysentery, diarrhea, skin diseases, etc. In this review, the core idea is to present the antifungal potential of the selected medicinal plant and its secondary metabolites against different fungal pathogens. Additionally, toxicological studies (safety profile) conducted on the amazing plant A. conyzoides L. are discussed for the possible clinical development of this medicinal herb. Articles available from 2000 to 2020 were reviewed in detail to exhibit recent appraisals of the antifungal properties of A. conyzoides. Efforts were aimed at delivering evidences for the medicinal application of A. conyzoides by using globally recognized scientific search engines and databases so that an efficient approach for filling the lacunae in the research and development of antifungal drugs can be adopted. After analyzing the literature, it can be reported that the selected medicinal plant effectively suppressed the growth of numerous fungal species, such as Aspergillus, Alternaria, Candida, Fusarium, Phytophthora, and Pythium, owing to the presence of various secondary metabolites, particularly chromenes, terpenoids, flavonoids and coumarins. The possible mechanism of action of different secondary metabolites of the plant against fungal pathogens is also discussed briefly. However, it was found that only a few studies have been performed to demonstrate the plant’s dosage and safety profile in humans. Considered all together, A. conyzoides extract and its constituents may act as a promising biosource for the development of effective antifungal formulations for clinical use. However, in order to establish safety and efficacy, additional scientific research is required to explore chronic toxicological effects of ageratum, to determine the probability of interactions when used with different herbs, and to identify safe dosage. The particulars presented here not only bridge this gap but also furnish future research strategies for the investigators in microbiology, ethno-pharmacology, and drug discovery. 相似文献
We demonstrate synthesis of water insoluble, novel copolymer PA1 from condensation of glyoxal dihydrazone and glyoxal dihydrazone bis(dithiocarbamate) monomers having high capacity to remove metal ions from aqueous solution. The presence of a high atomic percentage of nitrogen and sulfur atoms in PA1 leads to strong ligating ability with metal ions. The monomers and the polymer have been characterized by FTIR, UV–Visible spectroscopy, CHNS elemental analysis, NMR, MALDI-MS, and TG/DTA. As a proof of concept, the PA1 is tested for its ability to remove heavy metal ions Cu2+, Co2+, Fe2+, Ni2+, Mn2+, and CrO72? from aqueous solutions. PA1 efficiently removed metals ions from the metal solutions. The highest absorption ability has been observed toward the iron salts where 0.969 g metal salt is absorbed by 1 g polymer. This study has implication for inexpensive and efficient polymer for purification of water. 相似文献
Nanoparticle spray deposition finds numerous applications in pharmaceutical, electronics, manufacturing, and energy industries and has shown great promises in engineering the functional properties of the coated parts. However, current spray deposition systems either lack the required precision in controlling the morphology of the deposited nanostructures or do not have the capacity for large-scale deposition applications. In this study, we introduce a novel spray system that uses supercritical CO2 to assist the atomization process and create uniform micron-size water droplets that are used as cellulose nanocrystal (CNC) carriers. CNCs are selected in this study as they are abundant, possess superior mechanical properties, and contain hydroxyl groups that facilitate interaction with neighboring materials. We fundamentally investigate the effect of different process parameters, such as injection pressure, gas-to-liquid ratio, the axial distance between the nozzle and substrate, and CNC concentration on the final patterns left on the substrate upon evaporation of water droplets. To this end, we show how tuning process parameters control the size of carrier droplets, dynamics of evaporation, and self-assembly of CNCs, which in turn dictate the final architecture of the deposited nanostructures. We will particularly investigate the morphology of the nanostructures deposited after evaporation of micron-size droplets that has not been fully disclosed to date. Different characterization techniques such as laser diffraction, polarized microscopy, and high-resolution profilometry are employed to visualize and quantify the effect of each process parameter. Numerical simulations are employed to inform the design of experiments. Finally, it is shown that the fabricated nanostructures can be engineered based on the size of the carrier droplets controlled by adjusting spray parameters and the concentration of nanoparticles in the injected mixture. Process parameters can be selected such that nanoparticles form a ring, disk, or dome-shaped structure. Moderate operational conditions, simplicity, and time efficiency of the process, and use of abundant and biodegradable materials, i.e., water, CNCs, and CO2 promote the scalability and sustainability of this method.