Buckling of a stiff thin film on a compliant substrate in large deformation

A finite-deformation theory is developed to study the mechanics of thin buckled films on compliant substrates. Perturbation analysis is performed for this highly nonlinear system to obtain the analytical solution. The results agree well with experiments and finite element analysis in wavelength and amplitude. In particular, it is found that the wavelength depends on the strain. Based on the accurate wavelength and amplitude, the membrane and peak strains in thin films, and stretchability and compressibility of the system are also obtained analytically.     

Crystallization of Arthrobacter sp. strain 1C N-(1-D-carboxyethyl)-L-norvaline dehydrogenase and its complex with NAD+

The novel NAD+-linked opine dehydrogenase from a soil isolate Arthrobacter sp. strain 1C belongs to an enzyme superfamily whose members exhibit quite diverse substrate specificites. Crystals of this opine dehydrogenase, obtained in the presence or absence of co-factor and substrates, have been shown to diffract to beyond 1.8 ? resolution. X-ray precession photographs have established that the crystals belong to space group P21212, with cell parameters a = 104.9, b = 80.0, c = 45.5 ? and a single subunit in the asymmetric unit. The elucidation of the three-dimensional structure of this enzyme will provide a structural framework for this novel class of dehydrogenases to enable a comparison to be made with other enzyme families and also as the basis for mutagenesis experiments directed towards the production of natural and synthetic opine-type compounds containing two chiral centres.     

Anticancer agent development: X-ray crystal structure and keto-enol tautomerism of dimethyl 1-hydroxy-6,7-methylenedioxy-4-(3′,4′,5′-trimethoxyphenyl-trans-3,4-dihydronaphthalene-2,3-dicarboxylate

Structural and conformational information obtained from the crystal structure and solution¹H nmr investigations of the title compound are compared. The 4-aryltetralone, C₂₄H₂₄O₁₀, crystallizes as a chloroform solvate in the monoclinic space group, P2₁/n, witha=12.519(4),b=17.938(6),c=12.534(9)Å,=111.90(5)°, and D_calc=1.51 g cm^–3 forZ=4. The data for this compound were collected at –150°C. Least-squares refinement of 2796 observed [F _o5(F _o)] reflections led to the final agreement index ofR=0.062. A threefold static disorder was observed for one of the carboxyl groups. The second carboxyl group participates in an intramolecular hydrogen bond and is thus ordered. The¹H nmr spectrum revealed the title compound to exist as a keto-enol tautomeric mixture in solution. Vicinal hydrogen coupling constant analysis proved reliable in ascertaining B-ring stereochemistry of 2,3-disubstituted-4-aryltetralones.     

The influence of substituent groups on the resonance stabilization of benzene. An ab initio computational study

Accurate G3(MP2) calculations of the enthalpies of formation (Delta(f)H298) of organic molecules permit replication and extension of calculations that were formerly dependent on experimental thermochemical results. A case in point is Kistiakowski's classical calculation of the total stabilization enthalpy of benzene relative to that of cyclohexene, called for many years the "resonance energy". This paper investigates extension of the classical calculation to substituted benzenes. Slight modification of the usual procedure for Delta(f)H298 determination permits exclusion of all empirical information, leaving a purely ab initio result. Stabilization enthalpies relative to the corresponding 4-substituted cyclohexenes are presented for benzene, toluene, aniline, phenol, phenylacetylene, styrene, ethylbenzene, and phenylhydrazine. In the process of calculating these stabilization enthalpies, we have also obtained 42 values of Delta(f)H298 for monosubstituted benzenes, cyclohexenes, and cyclohexanes, 24 of which are not in the standard reference literature. For the remaining 18 G3(MP2) results, the unsigned mean difference between calculated Delta(f)H298 values and experimental results is +/-0.91 kcal x mol(-1).     

Regioselective hydroborations of methylvinylchlorosilanes

The regioselectivity of the hydroboration of the methylchlorovinylsilanes, Cl_nMe_3?nSiCHCH₂ (n= 0 ? 3), has been investigated using BH₃←THF, 9-BBN, disiamyl- and dicyclohexylborane. Methylation of the adducts with methylmagnesium bromide is complicated by formation of tetraalkylboronates. Alkaline hydrogen peroxide oxidation of the boronates gives reasonable yields of the corresponding α- and β-trimethylsilylethanols forn= 0 and 1. Forn= 2 and 3, conversion of the adducts to the corresponding α- and β- deuteroethylsilanes by treatment with excess sodium methoxide in methanol-0-d provides a more effective means of derivatization. Addition of the alkenes,n= 2 or 3, to excess BH₃←THF givesca. 90% of the α-boro-organo-chlorosilanes. For all of the alkenes, the dialkylboranes giveca. 80% of the β-boron adducts.     

Dihydroaromatic compounds in the Diels-Alder reaction—IV : Synthesis of bicyclic ketones

The in situ isomerisation and Diels-Alder reaction with 2-acetoxyacrylonitrile, of 2,5-dihydroanisole, leads to the adducts (1) which may be used as starting point for the synthesis of a number of bicyclo [2,2,2] octenones, bicyclo [3,2,1] octenones and bicyclo [3,2,2] nonenones. Under similar conditions, 2,5-dihydrotoluene reacts via an ene-reaction to produce, after hydrolysis, the acetylcyclohexadiene (27). The base-catalysed equilibration and subsequent Diels-Alder reactions of 2,5-dihydrotoluene have been investigated.     

Gas-liquid chromatography of fecal neutral steriods.

A method is described for the analysis of fecal neutral steriods with a dual-column gas-liquid chromatography (GLC) system. After saponification of the fecal slurry, the neutral steroids were extracted with hexane. The GLC separation of the compounds and quantitation were achieved by simultaneous injection of the derivatized and derivatized aliquots of the extract onto dual colmuns under identical conditions. The neutral steroids of interest were than identified by matching the retention times with those of known standards, and identification was confirmed by use of an interfaced GLC high-resolution mass spectrometry system. The detection limit was 0.003 mg of steroid/g of fecal slurry. The pricision of the method is illustrated by a relative standard diviation of 2-10% and a recovery of neutral steroids from 73-96%. The method was applied to the determination of fecal neutral steroids in a "High protein diet in colon cancer study". A considerably larger level of coprostanone than of coprostanol was observed. Data on neutral steroids in fecal samples from subjects on different diets are the subject of a separate publication.     

Cloud-point analysis of microlitre samples-determination of water in six common solvents

The classical cloud-point technique for determination of small amounts of water in organic solvents has been systematically investigated. The extreme sensitivity of the critical solution temperature of binary liquid mixtures to traces of impurity in one of the components makes the cloud-point method capable of high accuracy and sensitivity for routine determination of solvent contamination by water, and is admirably suited to analysis of small samples. Typically, the absolute error for water as contaminant is about 0.2% for 10-μl samples and 0.06 % for 50-μl samples. The critical solution temperature used was that of the n-hexane-methanol system. Its value is in dispute and considerable care was taken to obtain what is believed to be the correct value of 34,4 ± 0,2°. Small amounts of water in methanol, ethanol, 2-propanol, acetone, ethyl methyl ketone and dioxan were determined.     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.