From a Nonlinear, Nonconvex Variational Problem to a Linear, Convex Formulation

   Abstract. We propose a general approach to deal with nonlinear, nonconvex variational problems based on a reformulation of the problem resulting in an optimization problem with linear cost functional and convex constraints. As a first step we explicitly explore these ideas to some one-dimensional variational problems and obtain specific conclusions of an analytical and numerical nature.     

Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

Mechanisms of n‐butanol formation in butyl acrylate latexes

The mechanisms involved in the formation of n‐butanol during the synthesis of butyl acrylate containing latices were investigated. The experimental results showed that neither the hydrolysis of butyl acrylate nor of the ester bond in the butyl acrylate segments of the polymer played a major role in the formation of n‐butanol, which was mainly generated from the polymer backbone, by transfer reactions to polymer chain followed by cyclization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5838–5846, 2007     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Champ de vitesse dans un échangeur à vortex en régime turbulentHeat exchanger velocity field with turbulent inlet condition

We consider the isothermal flow through a cylindrical flat chamber, a model of some particular heat exchanger, for which LDV measurements and a numerical simulation have been performed. Experimental results show the establishment of an important vortex zone, the secondary flow extending all along the chamber radius. This observation leads to an expected significant increase of the fluid mixing. Results issued from the numerical simulation appear to be in close agreement with experimental data. Nevertheless, the k–ε model used here must be improved to obtain a better approach near the vortex centre. To cite this article: S. Petitot et al., C. R. Mecanique 330 (2002) 593–599.     

Acetylene weak bands at 2.5 μm from intracavity Cr:ZnSe laser absorption observed with time-resolved Fourier transform spectroscopy

The spectral dynamics of a mid-infrared multimode Cr(2+):ZnSe laser located in a vacuum sealed chamber containing acetylene at low pressure is analyzed by a stepping-mode high-resolution time-resolved Fourier transform interferometer. Doppler-limited absorption spectra of C(2)H(2) in natural isotopic abundance are recorded around 4000 cm(-1) with kilometric absorption path lengths and sensitivities better than 3 10(-8) cm(-1). Two cold bands are newly identified and assigned to the ν(1)+ν(4) (1) and ν(3)+ν(5) (1) transitions of (12)C(13)CH(2). The ν(1)+ν(5) (1) band of (12)C(2)HD and fourteen (12)C(2)H(2) bands are observed, among which for the first time ν(2)+2ν(4) (2)+ν(5) (-1).     

Left, right, and inner socles of associative systems

We investigate the basic properties of the different socles that can be considered in not necessarily semiprime associative systems. Among other things, we show that the socle defined as the sum of minimal (or minimal and trivial) inner ideals is always an ideal. When trivial inner ideals are included, this inner socle contains the socles defined in terms of minimal left or right ideals. This revised version was published online in June 2006 with corrections to the Cover Date.     

Analysis of Antennas with PBG Substrate

The use of photonic materials has been used in the theory of optical waves. The PBG (Photonic Band Gap) theory and material, was developed recently for optical frequencies and can be easily applied to millimeter waves, microwaves and planar antenna frequencies. The presence of photonic materials as substrate in antennas has some good characteristics such as, supression of light spontaneous emission and suppression of surface waves, allowing the application in planar antenna array. In this work an elaborate analysis using the full wave Transverse Transmission Line - TTL method, that provides efficient and concise results is applied to the planar antennas array with PBG substrate.     

A simple formula for mean multiplexing delay for independent regenerative sources

Simple expressions are given for the mean delay, mean waiting time, and mean busy period length in a multiplexer. Data streams with active periods having a general distribution are permitted, and the data rate during the active periods can be random. Data can also arrive in batches. The key restrictions of the model are that the sources are independent, idle periods are exponentially distributed, and a source generates at least enough data during an active period to keep the server busy throughout the period. The exact formulas allow evaluation of the error in approximations such as a heavy traffic diffusion approximation.Both continuous and discrete time models are considered. The discrete-time model includes that studied by Viterbi and subsequently generalized by Neuts. The Pollaczek-Khinchine formula for the mean amount of work in anM/GI/1 queue is retrieved as a limiting case.Preliminary version presented at IEEE INFOCOM, San Francisco, April 1993.