Use of participant EQA results to assess sample homogeneity and stability for qualitative analytes

International requirements for PT and EQA state that providers must demonstrate that samples are homogeneous and stable. However, testing for homogeneity and stability can be expensive, use samples that could otherwise serve as quality-control materials, and can also fail to detect significant inhomogeneity and instability. In some situations it may be preferable to use the results from participants to identify problems with sample lots, if historic results follow predictable distributions and a statistical decision rule can be produced. An unusually high proportion of incorrect results may indicate that samples were inhomogeneous or unstable. Conditions under which this can be demonstrated are discussed, and the efficacy of the proposal is demonstrated with two examples. This procedure is especially effective when there are a large number of participants and/or a historic small proportion of incorrect results. Providers who adopt this proposal will need to retain samples for testing and assume the risk of distributing bad samples.Presented at the Eurachem PT Workshop September 2005, Portorož, Slovenia     

Asymmetric synthesis of trans-2,3-piperidinedicarboxylic acid and trans-3,4-piperidinedicarboxylic acid derivatives

Asymmetric syntheses of (2S,3S)-3-(tert-butoxycarbonyl)-2-piperidinecarboxylic acid (1b), (3R,4S)-4-(tert-butoxycarbonyl)-3-piperidinecarboxylic acid (2b), and their corresponding N-Boc and N-Cbz protected analogues 8a,b and 17a,b are described. Enantiomerically pure 1b has been synthesized in five steps starting from L-aspartic acid beta-tert-butyl ester. Tribenzylation of the starting material followed by alkylation with allyl iodide using KHMDS produces the key intermediate 5a in a 6:1 diastereomeric excess. Upon hydroboration, the alcohol 6a is oxidized, and the resulting aldehyde 7 is subjected to a ring closure via reductive amination, providing 1b in an overall yield of 38%. Optically pure 2b has been synthesized beginning with N-Cbz-beta-alanine. The synthesis involves the induction of the first stereogenic center using Evans's chemistry and sequential LDA-promoted alkylations with tert-butyl bromoacetate and allyl iodide. Further elaboration by ozonolysis and reductive amination affords 2b in an overall yield of 28%.     

Nucleophilic Addition of CH, NH, and OH Bonds to the Phosphadiazonium Cation and Interpretation of (31)P Chemical Shifts at Dicoordinate Phosphorus Centers

The phosphadiazonium cation [MesNP](+) reacts quantitatively with the fluorenylide anion, MesNH(2), and MesOH (Mes = 2,4,6-tri-tert-butylphenyl), resulting in formal insertion of the N-P moiety into the H-Y (Y = C, N, O) bonds. Specifically, reaction of MesNPCl with fluorenyllithium gives the aminofluorenylidenephosphine [crystal data: C(31)H(38)NP, monoclinic, P2(1)/c, a = 9.568(8) ?, b = 24.25(2) ?, c = 11.77(1) ?, beta = 101.38(8) degrees, Z = 4]. Similarly, reaction of [MesNP][GaCl(4)] with MesNH(2) gives the diaminophosphenium salt [MesN(H)PN(H)Mes][GaCl(4)] [crystal data: C(36)H(60)Cl(4)GaN(2)P, monoclinic, C2/c, a = 24.921(2) ?, b = 10.198(4) ?, c = 16.445(2) ?, beta = 93.32(1) degrees, Z = 4], and reaction with MesOH gives the first example of an aminooxyphosphenium salt [MesN(H)POMes][GaCl(4)]. It is proposed that the reactions involve nucleophilic attack at phosphorus followed by a 1,3-hydrogen migration from Y to N. Experimental evidence for the formation of sigma-complex intermediates is provided by the isolation of [MesNP-PPh(3)][SO(3)CF(3)] [crystal data: C(37)H(44)F(3)NO(3)P(2)S, triclinic, P&onemacr;, a = 10.663(1) ?, b = 19.439(1) ?, c = 10.502(1) ?, alpha = 103.100(7) degrees, beta = 113.311(7) degrees, gamma = 93.401(7) degrees, Z = 2]. As part of the unequivocal characterization of the aminooxyphosphenium salt, detailed solid-state (31)P NMR studies and GIAO calculations on the phosphenium cations have been performed. Contrary to popular belief, the phosphorus shielding in dicoordinate cations is not caused by the positive charge but results from efficient mixing between the phosphorus lone pair and pi orbitals.     

SENSITIZATION OF PHOTOREACTIONS IN EIMHJELLEN'S RHODOPSEUDOMONAS BY A PIGMENT ABSORBING AT 830 mμ*

Abstract— The excitation spectrum for bacteriochlorophyll b fluorescence, the action spectrum for cytochrome-553 oxidation, and the action spectrum for P-985 bleaching are compared to the absorption (1-T) spectrum of a Rhodopseudomonas sp. NHTC 133 extract over the range 770 to 930 mμ. These spectra show that a minor pigment P-830 is more effective in sensitizing cytochrome oxidation and P-985 bleaching than in exciting fluorescence of Bchl b. These results are consistent with the proposal that P-830 is a form of Bchl b in special relation to the reaction center pigment P-985.     

Characterization of dynamic and steady-state protein phosphorylation using a fluorescent phosphoprotein gel stain and mass spectrometry

Protein phosphorylation plays a vital role in the regulation of most aspects of cellular activity, being key to propagating messages within signal transduction pathways and to modulating protein function. Pro-Q Diamond phosphoprotein gel stain is suitable for the fluorescence detection of phosphoserine-, phosphothreonine-, and phosphotyrosine-containing proteins directly in sodium dodecyl sulfate (SDS)-polyacrylamide gels. The technology is especially appropriate for profiling steady-state and dynamic phosphorylation on a proteome-wide scale, as demonstrated through detection of the native phosphorylation of cardiac mitochondrial phosphoproteins and changes in this profile arising from the activity of a protein kinase. For example, Pro-Q Diamond phosphoprotein gel stain was employed to demonstrate that among the 46 subunits of the mitochondrial respiratory chain complex, NADH:ubiquinone oxidoreductase (complex I), a 42 kDa subunit is phosphorylated in the steady-state. However, exposure of mitochondria to cAMP-dependent protein kinase increases phosphorylation of this 42 kDa subunit and results in de novo phosphorylation of an 18 kDa subunit as well. Since Pro-Q Diamond dye binds to phosphorylated residues noncovalently, the staining technology is fully compatible with modern microchemical analysis procedures, such as peptide mass profiling by matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry and post-source decay analysis of peptide phosphorylation.     

In situ observations of water production and distribution in an operating H2/O2 PEM fuel cell assembly using 1H NMR microscopy

Proton NMR imaging was used to investigate in situ the distribution of water in a polymer electrolyte membrane fuel cell operating on H2 and O2. In a single experiment, water was monitored in the gas flow channels, the membrane electrode assembly, and in the membrane surrounding the catalysts. Radial gradient diffusion removes water from the catalysts into the surrounding membrane. This research demonstrates the strength of 1H NMR microscopy as an aid for designing fuel cells to optimize water management.     

Development and certification of reference materials for residues of organochlorine and organophosphorus pesticides in beef fat ACSL CRM 1 and 2

Beef fat samples were prepared and tested as candidate reference materials for organochlorine and organophosphorus pesticides. The CRMs consisted of beef fat spiked with pesticide solutions. One sample (ACSL CRM 1) was prepared containing close to 0.2 mg/kg of each of the organochlorine pesticides dieldrin and heptachlor epoxide. A second sample (ACSL CRM 2) was prepared containing close to 0.8 mg/kg of each of the organophosphorus pesticides diazinon, chlorpyrifos and ethion. The spiking levels and homogeneity of the materials were verified. The coefficients of variation of 5 analyses carried out to test between-jar homogeneity for each reference material were dieldrin, 3.5%; heptachlor epoxide, 1.1%; diazinon, 2.1%; chlorpyrifos, 1.2% and ethion, 3.1%. No instability in any of these compounds was detected over a twelve month period. The candidate reference materials were found to be suitable for certification by interlaboratory testing. The certification process was based on a two-stage nested design described in ISO Guide 35. Analysis of results reported by collaborating laboratories provided an assessment of the homogeneity of the reference materials. The certified values together with their upper and lower 95% confidence limits are: ACSL CRM 1*Dieldrin*0.199 mg/kg **(0.188, **0.210 mg/kg) *Heptachlor epoxide*0.194 mg/kg **(0.176, **0.212 mg/kg) ACSL CRM 2*Diazinon*0.805 mg/kg **(0.755, **0.855 mg/kg) *Chlorpyrifos*0.790 mg/kg **(0.728, **0.852 mg/kg) *Ethion*0.813 mg/kg **(0.746, **0.879 mg/kg). A certificate for each material was prepared according to the guidelines set out in ISO Guide 31.     

Reactions of dicobalt octacarbonyl and related compounds with gem-dihalides

Dicobalt octacarbonyl and some of its derivatives (NaCo(CO)₄, Co₄(CO)₁₂, Hg[Co(CO)₄]₂, [Co(CO)₃PPh₃]₂, NaCo(CO)₃PPh₃) react with activated gem-dihalides, R₂CX₂, such as dichlorodiphenylmethane, 9,9-dihalofluorenes and dimethyl dibromomalonate, to give the ‘dimer’ olefin, R₂CCR₂. The course of this conversion involves formation of the coupling product, R₂XCCXR₂, followed by dehalogenation of the latter. These separate steps have been confirmed for activated monohalides (bromodiphenylmethane, 9-bromofluorene, dimethyl bromomalonate) which were readily coupled by cobalt carbonyls, and for activated vicinal dihalides (D,L and meso-dibromostilbene, 9,9′-dichlorobisfluorenyl) which cobalt carbonyls readily dehalogenated. A radical mechanism is favored for these processes, and indirect evidence in its favor is presented.     

Mechanisch-chemische Reaktionen in künstlichen organischen Fasern

Zusammenfassung Die beim Verstrecken sowie Mahlen von künstlichen organischen Fasermaterialien (Polyester-, Polyamid- und Viskosefasern) als Folge homolytischer Kettenspaltungen auftretende Freiradikalbildung wurde untersucht.

---

Mechanochemical reactions in synthetic organic fibres

The formation of free radicals due to homolytic chain fission occurring in the course of stretching and grinding of synthetic organic fibres (polyester, polyamide, and viscose fibres) has been investigated by means of ESR spectroscopy.

---

---

Mit 3 Abbildungen

---

Die Elektronspinresonanz-Messungen wurden im Chemischen Institut der Sir George Williams University, Montreal, Canada, durchgeführt.