Vibration analysis of planar serial-frame structures

A hybrid analytical/numerical method is proposed that permits the efficient dynamic analysis of planar serial-frame structures. The method utilizes a numerical implementation of a transfer matrix solution to the equation of motion. By analyzing the transverse and longitudinal motions of each segment simultaneously and considering the compatibility requirements across each frame angle, the undetermined variables of the entire frame structure system can be reduced to six which can be determined by application of the boundary conditions. The main feature of this method is to decrease the dimensions of the matrix involved in the finite element methods and certain other analytical methods.     

Characterisation of adsorbed layers on sulphide minerals by photoelectron spectroscopy

The systems galena/2-mercaptobenzothiazole (MBT) and pyrite/MBT have been studied using synchrotron radiation excited photoelectron spectroscopy (SRXPS). The chemisorption of MBT and the multilayer formation of 2,2′-dithiobis(benzothiazole) (BBTD) are evidenced by additional structures, observed beside the substrate signals, in the S2p-spectra of cleaved mineral surfaces after adsorption of MBT. The amount of the complex remains constant at concentrations as high as 10^–5 mol/L whereas the amount of BBTD increases. From the dependence of the adsorbate intensities on the excitation energy the conclusion can be drawn that an overlayer of BBTD on a chemisorbed layer of MBT is formed. The very weak adsorption of MBT on pyrite in alkaline solutions may explain the selective flotation of galena from pyrite in alkaline media.     

Mg改性对Co/γ-Al2O3-TiO2催化燃烧丙烷性能影响

采用分步浸渍法制备了系列Mg改性的Co/γ-Al_2O_3-TiO_2催化剂,通过X射线衍射(XRD)、紫外可见漫反射光谱(DR-UV-vis)、N_2吸附-脱附(BET)、X射线光电子能谱(XPS)和H_2程序升温还原(H_2-TPR)等技术对催化剂进行表征,并考察了其对丙烷燃烧的催化性能。结果表明,Co在原始γ-Al_2O_3-TiO_2载体和Mg改性MgO/γ-Al_2O_3-TiO_2载体上均以Co_3O_4的形式存在;Mg掺入后与Al_2O_3作用形成MgAl_2O_4尖晶石,改善了载体的织构性质,提升了Co_3O_4在催化剂载体表面的暴露数量和分散程度。此外,MgAl_2O_4与Co_3O_4相互作用提升了Co_3O_4颗粒表面Co~(3+)/Co~(2+)和O_(ads)/O_(latt)的比例,并削弱了Co-O键键能,从而提升了其对丙烷的催化燃烧活性。当Mg负载量为15%(质量分数)时,在Co/MgO(15%)/γ-Al_2O_3-TiO_2催化剂上进行丙烷燃烧,丙烷90%转化率的温度比无Mg掺杂的Co/γ-Al_2O_3-TiO_2催化剂的降低了45℃,并且连续反应40 h其活性保持稳定。     

Poly(dimethylsiloxane) microchip for precolumn reaction and micellar electrokinetic chromatography of biogenic amines

We have demonstrated that precolumn derivatization and capillary electrophoresis separation on a poly(dimethylsiloxane) (PDMS) microchip can be realized as efficient as those on glass microchips. In an optimized condition of micellar electrokinetic chromatography (MEKC), using 25 mM sodium borate buffer (pH 10.0) with 25 mM sodium dodecyl sulfate (SDS) and 5% v/v methanol, the electroosmotic flow in an oxidized PDMS microchip is stabilized within 3% for days. By employing a fluorometric derivatization with o-phthaldialdehyde (OPA) in an optimally designed reaction chamber, four most important biogenic amines occurring in foods, histamine, tyramine, putrescine, and tryptamine, are quantitatively determined in less than 1 min at the levels applicable to real samples. The migration behaviors of anionic OPA-derivatized biogenic amines under the MEKC conditions are analyzed, and it has been found that under our separation conditions, the electrophoretic mobility of the SDS micelles is significantly greater than those of the anions in the aqueous phase. The channel manifold in a PDMS substrate is fabricated using replica molding against a thick photoresist, SU-8, pattern generated by photolithography. The plate with the microchannel pattern is strongly, irreversibly bonded to another PDMS plate by using a new bonding technique, which employs surface oxidation by corona discharge generated from a cheap, handy source, Tesla coil.     

Nioboxidfluoride mit Blockstrukturen — Elektronenmikroskopische Durchstrahlungsaufnahmen und ihre Simulation

Niobiumoxidefluorides Nb₅₉O₁₄₇F, Nb₃₁O₇₇F, Nb₆₅O₁₆₁F₃ and Nb₃₄O₈₄F₂ were prepared by reaction of Nb₂O₅ and Nb₃O₇F at 1 270°C. These niobiumoxidefluorides have blockstructures which were examined by high resolution electron microscopy. The observed images of the crystal structures were compared with computer simulated images.

     

Establishment of traceability of ammonium nitrogen determination in wastewater

A case study is presented for the establishment of traceability for ammonium nitrogen determination in wastewater in a routine laboratory in order to fulfil the requirements of ISO/IEC standard 17025. The necessary relevant information was obtained from the method validation data, the quality control data and equipment calibration certificates. The method of measurement is described together with the measurement equation, selected traceable reference standards and the associated measurement uncertainty. The major sources of uncertainty of the result of measurement were identified and the combined uncertainty was calculated. Identification of the main uncertainty sources represents the basis for target operations for reducing the measurement uncertainty of this determination.     

Material profile influences in bulk‐heterojunctions

The morphology in mixed bulk‐heterojunction films are compared using three different quantitative measurement techniques. We compare the vertical composition changes using high‐angle annular dark‐field scanning transmission electron microscopy with electron tomography and neutron and x‐ray reflectometry. The three measurement techniques yield qualitatively comparable vertical concentration measurements. The presence of a metal cathode during thermal annealing is observed to alter the fullerene concentration throughout the thickness of the film for all measurements. However, the absolute vertical concentration of fullerene is quantitatively different for the three measurements. The origin of the quantitative measurement differences is discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1291–1300     

New Lignans from the Aerial Parts of Rudbeckia laciniata

Three new furofuran lignans, (+)‐4,4′‐O‐diangeloylpinoresinol ( 1 ), (+)‐4,4′‐O‐diangeloylmedioresinol ( 2 ), and (+)‐4,4′‐O‐diangeloylsyringaresinol ( 3 ), together with the known compound (+)‐syringaresinol, were isolated from the MeOH extract of Rudbeckia laciniata. The structure elucidation of these compounds were based on 1D‐ and 2D‐NMR, and HR‐ESI‐MS data. The additional structural evidence was obtained from alkaline hydrolysis of the compounds.     

Polycondensation of Sebacic Acid with Primary and Secondary Hydroxyl Groups Containing Diols Catalyzed by Candida antarctica Lipase B

Abstract

The aliphatic polyesters are normally synthesized by ester interchange reactions or direct esterification of hydroxyacids or diacid/diol combinations. Biotransformation, utilizing the enzymes as catalysts, was accepted as an alternative route for the synthesis of aliphatic polyesters and offers various advantages compared with the conventional, metal-catalyzed polymerization reactions. Previous studies indicated that lipase-catalyzed polycondensation reactions between diols and diacids occurred preferentially at primary hydroxyl groups of diols, when diols contained both primary and secondary hydroxyl groups. In this work, we investigated lipase-catalyzed polycondensation of diacids and secondary hydroxyl group–containing diols, and successfully synthesized polyesters by polycondensation with secondary hydroxyl groups as well as primary hydroxyl groups. Various diols, glycerol, 1,2-propanediol, 1,3-butanediol, 2,3-butanediol, and 2,4-pentanediol were tested for the polycondensation. The polymerization was achieved by heating a mixture of lipase B, sebacic acid, and the diols in anhydrous toluene at 100 °C for 72 h. The resulting polymers were characterized by ¹H and ¹³C NMR spectroscopy, Fourier transform–infrared spectroscopy, thermogravimetric analysis, and gel permeation chromatography.     

Mesomorphic behaviour and TSDC measurements of ortho-metallated palladium(II) and platinum(II) complexes with S,O-donor co-ligands

A series of ortho-metallated Pd and Pt complexes containing an imine ligand carrying three alkoxy chains and N-benzoylthiourea derivatives as co-ligands were prepared and their liquid crystalline properties investigated. Their structures were assigned based on elemental analysis, IR and ¹H NMR spectroscopy, whereas thermal properties were investigated by differential scanning calotimetry and polarising optical microscopy. All the compounds exhibit monotropic transitions involving nematic and smectic A phases, with the mesomorphic behaviour strongly related to the type of N-benzoylthiourea as well as the metal centre used. The thermally stimulated depolarisation current technique was employed to determine the conduction mechanism, phase transition temperature and the activation energies for one of the ortho-metallated Pd complexes.