Particle multiplicities in the fission-like reactions of 340 MeV Si on Th

Pre-scission and post-scission multiplicities of neutrons and alpha particles have been simultaneously measured for the fission-like reactions of 340 MeV ²⁸Si on ²³²Th. Dynamical model calculations using HICOL code predict that about 90% of the observed events are of quasi-fission type while the remaining 10% are from compound nucleus fission decay. Moving source fits were carried out to the observed neutron and alpha particle spectra, measured at different angles with respect to the fragment directions. The pre-scission and post-scission neutron multiplicities are deduced to be 8.7±2.0 and 9.4±2.0, respectively. The corresponding multiplicity values for alpha particles are found to be 0.22±0.08 and 0.1±0.03. From the measured post-scission neutron multiplicity, it is inferred that about 65±20 MeV of the initial excitation energy remains at scission. This may be compared to the value of 85±30 MeV estimated from PACE2 statistical model calculations, adjusted to reproduce the measured pre-scission neutron multiplicity. From a comparison of the Statistical Model predictions with the measured pre-scission neutron multiplicity, the fission delay is estimated to be of 5⁺⁷₋₃×10⁻²⁰ s which overlaps with the average duration of fission-like process from the contact to the scission point (2×10⁻²⁰ s) as determined from HICOL-based dynamical calculations. For the delay time deduced as above, the pre-scission alpha particle multiplicity calculated by the PACE2 code is about a factor two larger than the experimental one, demonstrating the difficulties in modelling the alpha particle emission from highly elongated shapes that characterize the fissioning system from the contact point to scission.     

Enantiomeric separation of amphetamine,methamphetamine and ring substituted amphetamines by means of a β-cyclodextrin-chiral stationary phase

Summary The enantioseparation of amphetamine, methamphetamine and various ring-substituted amphetamines by use of a chiral stationary phase carrying immobilized native -cyclodextrin (-CyD) selectors is reported. The system is evaluated for resolving the specified compounds directly without any derivatization and after derivatization with phenyl isothiocyanate (PITC), naphthyl isothiocyanate (NITC) and 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC). This direct enantioseparation is compared with the features of indirect separation of diasteromeric derivatives after reaction with the optically pure Marfey's reagent employing a simple non-chiral alkyl-silica (RP-8) column. A selection of those methods best suited for each single amphetamine is given.Seventeen different samples of amphetamine, confiscated by the Swedisch police, were analyzed with respect to their enantiomeric composition. Within this set of samples synthesized by the same method no significant deviation from a racemic ratio could be observed.     

Conformational and photophysical studies on porphyrin-containing donor-bridge-acceptor compounds. Charge separation in micellar nanoreactors

Photophysical studies with semi-rigid, 1, and flexible, 2, donor-bridge-acceptor (D-b-A2+) molecules with D a porphyrin and A2+ a methyl viologen moiety, were performed in neat polar solvents as well as included in surfactant (DTAB) aqueous and in reverse AOT/n-alkane micelles. The micelles acted as nanoreactors for the photoinduced electron transfer reaction upon laser excitation. In spite of the longer lifetime of the charge separated (CS) state in the semi-rigid tetrad 1(ca. 200 ns vs. ca. 100 ns for the flexible dyad 2), the CS formation quantum yield, for example in acetonitrile, was lower for the former (phi(CS) = 0.13) than for the latter (0.58). Comparison of the time-resolved fluorescence data in neat solvent and in the micelles yielded the phi(CS) values in the dilute micellar solutions. Application of laser-induced optoacoustic spectroscopy at various temperatures to 1 dissolved in a polar organic solvent (benzonitrile, BZN) included in aqueous DTAB nanoreactors afforded structural volume changes for the production in hundreds of ps of the CS state upon excitation of a polar molecule. The contraction during CS formation upon excitation of the collapsed conformer in BZN is attributed to the entering of solvent into the open molecular cavity. The opening upon formation of the CS state due to photoinduced electron transfer in the 1 collapsed conformation arises from the repulsion of the two positively charged ends in this state, as previously calculated. Inclusion of 1 in reverse AOT micelles in various n-alkanes also led to a contraction upon excitation, but the data had much more error due to the limited range of variability of the ratio of thermoelastic parameters. The data obtained with the more flexible "supermolecule" 2 showed the predicted large conformation flexibility of these molecules.     

Carboxylate-bridged copper(II)-lanthanide(III) complexes [(Cu(3)Ln(2)(oda)(6)(H(2)O)(6)).12H(2)O](n)(Ln = Dy,Ho, Er,Y; oda = oxydiacetate)

The hydrothermal reaction of Ln(2)O(3) (Ln = Dy and Ho), Cu(OAc)(2).2H(2)O, and oxydiacetic acid in the approximate mole ratio of 1:3:8 resulted in the formation of two new members of the isostructural series of polymers formulated as [(Cu(3)Ln(2)(oda)(6)(H(2)O)(6)).12H(2)O](n), crystallizing in the hexagonal crystal system, space group P6/mcc (No. 192). Temperature-dependent magnetic susceptibilities and EPR spectra are reported for the heterometallic compounds Cu-Dy 1, Cu-Ho 2, Cu-Er 3, and Cu-Y 4. The results are discussed in terms of the structure of the compounds, the electronic properties of the lanthanide ions, and the exchange interactions between the magnetic ions.     

Separation of purine bases, nucleosides and nucleotides by a column-switching technique combining reversed-phase and anion-exchange high-performance liquid chromatography

An on-line two-stage column chromatographic technique is described which combines reversed-phase and anion-exchange chromatography for the separation of purine nucleic acid components. The elution program applied, consisting of two gradient programmes, provides a separation of bases and nucleosides on the octadecyl silica column and a separation of the nucleotides on the anion-exchange column to which they have been switched at the beginning of the elution. This method is easy to modify for special problems and can be used when establishing a complete profile of purines.     

Characterization of antithrombin III from human plasma by two-dimensional gel electrophoresis and capillary electrophoretic methods

The isoforms distribution of the glycoprotein antithrombin III (ATIII) derived from human plasma was investigated by means of isoelectric focusing (IEF) in polyacrylamide gels with immobilized pH gradients (IPG) and two-dimensional gel electrophoresis (2-DE) as well as capillary electrophoretic methods. It turned out that the presence of high concentrations of chaotropics (urea, thiourea) and zwitterionic detergents (3-[(3-cholamidepropyl)dimethylammonio]-1-propanesulfonate (CHAPS)) was decisive for attaining good resolution of the protein isoforms. Resolution by IPG-IEF was obtained with excellent reproducibility and pI differences down to 0.01 pH units could be distinguished. ATIII-alpha and ATIII-beta-fractions preseparated by heparin affinity chromatography showed an analogous but shifted spot pattern consisting each of one major and three minor isoforms. The main isoforms of ATIII-alpha and ATIII-beta exhibit pI values of 5.18 and 5.32, respectively, both values determined in the presence of high concentrations of urea. The pI difference of 0.14 pH units correspond to the effect of two sialic acids absent in ATIII-beta. The formation and occurrence of ATIII dimers and trimers turned out to be dependent on the sample preparation. The results obtained by 2-DE were compared with those of capillary zone electrophoresis (CZE) and capillary IEF (CIEF). Quantitative analysis regarding the CZE separated isoforms of plasma derived ATIII yielded a content of about 70% ATIII-alpha main isoform and about 6.6% of ATIII-beta. The pI values of ATIII determined by CIEF with internal calibration were in fair agreement with the pI values of the main isoforms achieved with 2-DE.     

Violation of the Strong Equivalence Principle due to the self-force in a Kerr spacetime

As is known, a charge in a gravitational field experiences a (gravitationally-induced) self-interaction force (self-force) only in curved space-times (in any reference frame), but not in the accelerated frames in flat spacetimes. Therefore, the presence of any self-force indicates, from a formal point of view, a violation of the Strong Equivalence Principle (SEP); as a result, observability of the self-force in the validity domain of classical electrodynamics (CE) means observability of the related violation of SEP. In this paper we investigate the observability of the self-force on a charge at rest on the symmetry axis in a Kerr spacetime, as recently calculated in a paper by the same authors, in the validity domain of CE. Analysis shows that, in the validity domain of CE, no effect of the self-force is observable outside the Schwarzschild radius. In contrast, some effect is observable for very large values of the angular momentum, in a small neighbourhood of the turning point (where a reversal of the tidal forces direction takes place), between the outer horizon and the Schwarzschild radius. This is the only case we have found where SEP fails because of the self-force.     

Nanoporous gold thin films synthesised via de-alloying of Au-based nanoglass for highly active SERS substrates

Nanoporous gold thin films have been fabricated through chemical de-alloying of Au-based nanoglass with a nanocolumnar structure, with composition Au₄₀Cu₂₈Ag₇Pd₅Si₂₀ (at.%), that had previously been deposited by magnetron sputtering. By varying the de-alloying conditions, gold ligaments ranging from 20 to 100?nm were obtained. The microstructure and chemical composition of the as-prepared films were characterised by various techniques. Surface-enhanced Raman scattering (SERS) of thin films was investigated using rhodamine 6G. The results indicate that the main microstructural features with interconnected ligaments and defects of nanoporous gold result in significant SERS enhancement.     

An Improved Synthesis of 2′-Hydroxy-3′,4′,6′-trimethoxyacylophenones

A wide variety of 2′-hydroxypolymethoxyacetophenones and propiophenones, e.g. 1a and 1b are used in the synthesis of flavone and ehromone natural products.¹ Repeated attempts to prepare 1a and 1b by reacting 1,2,3,5-tetramethoxybenzene 2 with acetyl or propionyl chlorides and AlCl₃ in ether² gave products which were difficult to purify.³ We traced the problem to ring-ethoxy contaminants which were isolated and tentatively identified as 3a and 3b.     

Glucose/Ribitol Dehydrogenase and 16.9 kDa Class I Heat Shock Protein 1 as Novel Wheat Allergens in Baker’s Respiratory Allergy

Wheat allergens are responsible for symptoms in 60–70% of bakers with work-related allergy, and knowledge, at the molecular level, of this disorder is progressively accumulating. The aim of the present study is to investigate the panel of wheat IgE positivity in allergic Italian bakers, evaluating a possible contribution of novel wheat allergens included in the water/salt soluble fraction. The water/salt-soluble wheat flour proteins from the Italian wheat cultivar Bolero were separated by using 1-DE and 2-DE gel electrophoresis. IgE-binding proteins were detected using the pooled sera of 26 wheat allergic bakers by immunoblotting and directly recognized in Coomassie stained gel. After a preparative electrophoretic step, two enriched fractions were furtherly separated in 2-DE allowing for detection, by Coomassie, of three different proteins in the range of 21–27 kDa that were recognized by the pooled baker’s IgE. Recovered spots were analyzed by nanoHPLC Chip tandem mass spectrometry (MS/MS). The immunodetected spots in 2D were subjected to mass spectrometry (MS) analysis identifying two new allergenic proteins: a glucose/ribitol dehydrogenase and a 16.9 kDa class I heat shock protein 1. Mass spectrometer testing of flour proteins of the wheat cultivars utilized by allergic bakers improves the identification of until now unknown occupational wheat allergens.