Random Copolymers of 1,5-Dioxepan-2-one

ABSTRACT

Copolymers of 1,5-dioxepan-2-one (DXO) and e-caprolactone (?-CL), δ-valerolactone (δ-VL) or L-lactide (LLA) have been synthesized and characterized. High molecular weight copolymers were obtained using stannous-2-ethyl hexanoate as catalyst in bulk. Reactivity ratios for the copolymerization of DXO and δ-VL were determined at 110°C as r_VL=0.5 and r_DXO=2.3. At high conversion, depolymerization of δ-VL occurred, resulting in lower molecular weight and variations in the copolymer composition.

Physical properties, such as crystallinity and melting temperature of the DXO-copolymers proved to be strongly dependent on the choice of comonomer and on the molar composition of the copolymers. DXO appears to be incorporated into the poly-?-caprolactone (PCL) crystals and to some extent into the poly-δ-valerolactone (PVL) crystals, resulting in a more gradual decrease in crystallinity with increasing amount of DXO.     

Sulfide determination in hydrothermal seawater samples using a vibrating gold micro-wire electrode in conjunction with stripping chronopotentiometry

A rapid electrochemical stripping chronopotentiometric procedure to determined sulfide in unaltered hydrothermal seawater samples is presented. Sulfide is deposited at −0.25 V (vs Ag/AgCl, KCl 3 M) at a vibrating gold microwire and then stripped through the application of a reductive constant current (typically −2 μA). The hydrodynamic conditions are modulated by vibration allowing a short deposition step, which is shown here to be necessary to minimize H₂S volatilization. The limit of detection (LOD) is 30 nM after a deposition step of 7 s. This LOD is in the same range as the most sensitive cathodic voltammetric technique using a mercury drop electrode and is well below those reported previously for other electrodes capable of being implemented in situ.     

Secondary ion yields produced by keV atomic and polyatomic ion impacts on a self-assembled monolayer surface

A suite of keV polyatomic or 'cluster' projectiles was used to bombard unoxidized and oxidized self-assembled monolayer surfaces. Negative secondary ion yields, collected at the limit of single ion impacts, were measured and compared for both molecular and fragment ions. In contrast to targets that are orders of magnitude thicker than the penetration range of the primary ions, secondary ion yields from polyatomic projectile impacts on self-assembled monolayers show little to no enhancement when compared with monatomic projectiles at the same velocity. This unusual trend is most likely due to the structural arrangement and bonding characteristics of the monolayer molecules with the Au(111). Copyright 1999 John Wiley & Sons, Ltd.     

Fusion around the barrier for 7Li+12C

Fusion cross-sections for the ⁷Li + ¹²C reaction have been measured at energies above the Coulomb barrier by the direct detection of evaporation residues. The heavy evaporation residues with energies below 3 MeV could not be separated out from the α-particles in the spectrum and hence their contribution was estimated using statistical model calculations. The present work indicates that suppression of fusion cross-sections due to the breakup of ⁷Li may not be significant for ⁷Li + ¹²C reaction at energies around the barrier.     

Real meromorphic functions and linear differential polynomials

We determine all real meromorphic functions f in the plane such that f has finitely many zeros, the poles of f have bounded multiplicities, and f and F have finitely many non-real zeros, where F is a linear differential polynomial given by F = f (k) +Σk-1j=0ajf(j) , in which k≥2 and the coefficients aj are real numbers with a0≠0.     

Dissolved iron analysis in estuarine and coastal waters by using a modified adsorptive stripping chronopotentiometric (SCP) method

An electrochemical method based on adsorptive stripping chronopotentiometry (SCP) with a rotating mercury film electrode has been developed for the determination of dissolved iron (III) at subnanomolar concentrations in estuarine and coastal waters. The detection limit was 0.11 nM after adsorption time of 60 s. Compared to the other chronopotentiometric methods available for dissolved iron measurement in natural and estuarine waters, the procedure described here exhibits a 15-fold better sensitivity. Therefore, it allows one to accurately quantify concentrations commonly found in estuarine and coastal waters. Moreover, by using the speciation scheme proposed by Aldrich and van den Berg (Electroanalysis 10 (1998) 369), several forms could be measured, i.e. reactive iron (Fe R) and reactive iron (III) (Fe^III R), or estimated, i.e. complexed iron (Fe C) and reactive iron (II) (Fe^II R). The method described here is reliable, fast, inexpensive and compact. It was applied successfully to the study of the chemical speciation of dissolved iron along the salinity gradient of the Aulne estuary (Brittany-France).     

A stripping chronopotentiometric (SCP) method with a gold film electrode for determining inorganic arsenic species in seawater

An electrochemical method based on stripping chronopotentiometry (SCP) with a gold film electrode has been developed for determining arsenic in seawater. The detection limits were 0.053 ppb (0.71 nM) and 0.022 ppb (0.29 nM) for total inorganic As (As(T)) and As(III) after deposition times of 60 and 150 s, respectively. Compared to other stripping chronopotentiometric methods that use a gold macroelectrode to perform measurements of arsenic in seawater, the procedure described here exhibits better sensitivity and a fourfold shorter deposition time. Among the SCP methods, our procedure had proven its ability to analyse arsenic(III) in seawater. It therefore allows the concentrations of the various arsenic inorganic species in seawater—i.e. As(T), As(III) and As(V)—to be analysed. The proposed method is reliable, inexpensive and compact. It was successfully applied to the study of arsenic speciation along the salinity gradient of the Penzé estuary (NW France).     

Sorption of inorganic nanoparticles in woven cellulose fabrics

Titanium dioxide was deposited from aqueous suspension onto cellulosic surfaces.Titania was sourced from Degussa (P25TM,70:30 anatase:rutile).Dry uptake of particles was shown to be rapid and dominant with one-third of the deposition occurring in less than 30 s and over one-half in the first minute.Isotherms were recorded to compare the rate of titanium deposition on dry and pre-wetted cotton.In the dry case uptake reached a maximum in 30 min whereas in the pre-wetted case the uptake was seen to continue beyond 180 min.A broad trend of higher deposition occurring at lower pH was seen,corresponding to the region where surface charges were opposite and thus attractive.Dry pickup was less significant at high pH.The response to varying ionic strength was complex and was attributed to the combined effect of charge screening,particle aggregation and consequent particle entrapment or occlusion.Titania deposition into the interstices of woven cotton sheets resulted in the formation of inorganic,nanoparticulate skeletons which could be isolated by controlled combustion of the cellulose and thus cotton was suggested to have potential for the templated synthesis of high surface area semiconductor materials.     

Measurements of trace concentrations of mercury in sea water by stripping chronopotentiometry with gold disk electrode: influence of copper

A stripping chronopotentiometric method, using a rotating gold disk electrode for mercury measurements in sea water is described. Compared with a same method using a stationary gold film electrode, this method has a eight times higher sensitivity and a detection limit of 5 ng l⁻¹ after 10 min deposition time. Moreover, the time needed for gold plating is eliminated. Compared with other electrochemical methods capable of measuring mercury at low concentrations, the present method is more simplified with no degassing step and no need to use a medium-exchange procedure before the stripping step. These characteristics render the method easily practicable on board oceanographic vessels for ‘in situ’ measurements.