Effect of thermal history on crystallization and melting behaviour of lldpe

In this paper two LLDPE samples with their own structural parameters were studied by means of DSC. Experimental results show that DSC was good for revealing slight structural difference between these two samples. Furthermore, the effect of thermal history on crystallization and melting behaviour of LLDPE was observed clearly through varying conditions of thermal treatment.

---

Zusammenfassung Mittels DSC werden zwei LLDPE-Proben mit ihren eigenen Strukturparametern untersucht. Die Versuchsergebnisse zeigen, da\ sich DSC gut eignet, um gering fügige Unterschiede dieser zwei Proben nachzuweisen. Weiterhin wurde unter verschiedenen Bedingungen der Einflu\ der thermischen Vorgeschichte auf das Kristallisations-und Schmelzverhalten von LLDPE untersucht.

     

BANDED TEXTURE FORMATION IN NEMATIC SOLUTION OF POLY (1,4-BENZAMIDE) IN SULFURIC ACID

The banded texture in films prepared from nematic poly (1,4-benzamide) (PBA)/H_2SO_4 solution by shearing and without shearing has been studied by using microscopy techniques. The kinetic parameters of banded texture formation γ_c and τ_b were measured for nematic solution of PBA by using parallel-plate shearing apparatus. The banded texture was also observed in randomly packed domains for nematic solution of PBA on standing without shearing. The properties of banded texture show no difference between the two samples with or without shearing.     

从溶胀平衡研究玻璃态高聚物的凝聚缠结网络

在13~15℃室温条件下对聚苯乙烯(PS)颗粒在二氧六环/水混合溶剂中的溶胀情况进行目视观察,可以看到,当减小混合溶剂二氧六环/水中的水含量时,PS颗粒从玻璃态到溶胀的玻璃态、溶胀的高弹态、流体态的转变,与PS颗粒升温时从玻璃态到高弹态、流体态的转变相对应.选定混合溶剂二氧六环/水(水6·8wt%)对一个单分散PS试样(Mw=1·68×105)在30℃进行分相平衡和溶胀平衡的测定.分相平衡是先将PS/二氧六环/水(混合溶剂水含量6·8wt%)体系加热到130℃使PS溶解成一均相溶液,然后在冷却过程中分相,在30℃达分相平衡(30天)时,浓相高分子体积浓度p″=0·304,稀相几乎为纯溶剂.从Flory-Huggins相平衡理论得出此体系的高分子-溶剂相互作用参数χ=0·63.本工作使用的单分散PS试样在选定的混合溶剂,即二氧六环/水(水6·8wt%)中,30℃时不能溶解只能溶胀,单分散PS颗粒淬冷试样(密度ρp=1·0451g/mL)到达溶胀平衡(80天)时浓相高分子体积浓度p″=0·308.而此淬冷试样经在80℃热处理100h后的老化试样(ρp=1·0470g/mL)达溶胀平衡(70天)时p″=0·312.从溶胀过程中浓相体积变化曲线可知试样经在80℃热处理过程中凝聚网络趋向于更均一,更接近热处理温度下的平衡态,试样密度增大,网络产生了新的链间凝聚,物理交联密度增大(凝聚点间分子量减小).从溶胀平衡理论并取χ=0·63(分相平衡)可得到淬冷试样的物理交联点间分子量Mc=11·6×104,老化试样的物理交联点间分子量Mc=6·9×104.实验结果说明溶胀过程及溶胀平衡的测定可以反映玻璃态高聚物中的凝聚网络结构的细节,而且非常敏感.     

Shear-induced band texture of side group liquid crystalline polymers

The shear-induced band texture of conventional end-on fixed side group liquid crystalline polymers (LCPs) has been investigated by using polarizing optical microscopy (POM), small angle light scattering (SALS) and infra-red dichroism techniques. The band spacing is about 1 μm, which increases very slightly on increasing the temperature of shearing and is independent of shearing rate within the range studied. The band texture is not seen to exhibit an interchange of dark and bright bands on rotation of the sample with respect to the polarizer/analyser, but a typical periodical structure is reflected by the SALS patterns of the band texture. The relaxation behaviour of the bands indicates that the band texture formed here is the result of the orderly aligning of domains exhibiting the focal-conic texture, and this is totally different from the case of main chain LCPs where the band texture is substantially an optical effect of the periodic zigzag or sinusoidal structure of parallel aligned microfibrils. Infra-red dichroism and rotating parallel-plate shearing measurements show that the axes of the backbone of the polymer tend to orient in the shearing direction and the end-on fixed mesogenic side groups tend to align perpendicular to the shearing direction.     

RHEOLOGICAL CHARACTERIZATION OF PROCESSABILITY OF UNVULCANIZED POLYBUTADIENE

Rheological investigation on a series ot unvulcamzed polybutadiene elastomers of different processability has been carried out by means of a capillary extrusion rheometer. It is found that the processability of unvulcanized polybutadiene can be correlated with the occurrence of unsteady flow and the wall stress, dependence of the dimensionless number e characterizing the entrance elongational elasticity which has been found to be sensitive to the branching structure and the molecular weight distribution of the samples. Interpretations based on the structural data of unvulcanized polybutadiene were discussed.     

A novel memcapacitor and its application in a chaotic circuit

Nonlinear Dynamics - In this paper, a novel memcapacitor is designed by the SBT ( $$\hbox {Sr}_{0.95}\hbox {Ba}_{0.05}\hbox {TiO}_{{3}}$$ ) memristor and two capacitors. A fifth-order memcapacitor...     

甲醇生产主精馏塔的模拟计算

对甲醇精馏主塔进行了模拟计算，并以一实际生产装置沿塔身的温度与浓度分布进行了验证。结果表明，水和甲醇的平均偏差为０．９％，微量杂质，不计丁基油，平均偏差为４９ｐｐｍ，温度平均偏差为２．９℃。说明本计算方法及采用的模型参数是可靠的，可用于工程计算。本文进一步指出，为降低废水中醇类含量，较理想的方法是选择合适的精甲醇与丁基油的采出量。     

The state of high global chain orientation but nearly random segmental orientation of amorphous polymers

In the rubbery state of amorphous polymers under uni-axial drawing the global chain orientation will relax in orders of magnitude slower than the relaxation of local segmental orientation. When this state of hot drawn sample is frozen at temperatures lower than its glass transition, T_g, an amorphous state with high global chain orientation but nearly random segmental orientation (GOLR) could result. Experimentally the GOLR state of amorphous polymers is easily realized by uni-axial drawing the polymer at temperatures 20–30°C above its T_g. The characteristic features of a GOLR state are i) large recovery of the elastic deformation of global chain on being heated to temperatures above T_g, ii) very small birefringence and IR dichroism, iii) nearly isotropic sonic and ultrasonic velocity of propagation, iv) nearly isotropic WAXD pattern, while it shows v) pronounced anisotropy in stress-strain behavior for large deformations and vi) appreciable anisotropy of thermal conductivity and of microwave dielectric properties. Concrete examples with detailed experimental results will be reviewed.     

Transition of polymers from rubbery elastic state to fluid state

On increasing the temperature of a polymer, the transition of the polymer from a rubbery elastic state to a fluid state could occur. The transition temperature is termed the fluid temperature of the polymer, T _f, which has a direct relationship with the polymer molecular weight. As one of polymer parameters, T _f is as important as the glass transition temperature of a polymer, T _g. Moreover, special attention to T _f should be paid for polymer processing. In research on the transition of a polymer from a rubbery elastic state to a fluid state, the concept of T _f would be more reasonable and more effective than the concept of T _l,l because it is neglected in the concept of T _l,l in that the molecular weight of a polymer may affect the transition of the polymer. In this paper the discussion on the fluid temperature involves the characters of polymers, such as the deformation—temperature curve, the temperature range of the rubbery state and the shear viscosity of polymer melt. From the viewpoint of the cohesional state of polymers, the transition of a polymer from a rubbery elastic state to a fluid state responds to destruction and construction of the cohesional entanglement network in the polymer. The relaxing network of polymer melt would be worthy to be considered as an object of study. __________ Translated from Huaxue Tongbao (Chemistry), 2008,71(3) (in Chinese)