A novel strategy to verification of adulteration in alcoholic beverages based on Schlieren effect measurements and chemometric techniques

A novel strategy to evaluation of adulteration in alcoholic beverages based on the measurement of the Schlieren effect using an automated FIA system with photometric detection is proposed. The assay is based on the Schlieren effect produced when beverage samples are injected in a single-line FIA system that uses water as carrier stream and a light-emitting diode-phototransistor photometer controlled by microcomputer as detector. The flow system presents limited mixing conditions which make possible to create gradients of refractive index (Schlieren effect) in the injected sample zone. These gradients are reproducible, characteristic of each alcoholic beverage and undergo specific modifications when adulterations with water or ethanol are imposed. Schlieren effect data of brandies, cachaças, rums, whiskies and vodkas were treated by SIMCA to elaborate class models applied in the evaluation of alcoholic beverages adulteration. Samples of the original matrix of each sort of beverages were adulterated in laboratory by adding water, methanol and ethanol in levels of 5% and 10% (v/v). These samples were used as test set to validate SIMCA class models. The verification of authenticity using Schlieren effect measurements presented good results making possible to identify 100% of the beverages samples adulterated in laboratory and 93% of the actual adulterated alcoholic beverages with confidence levels of 95%. As principal advantage, the automated system does not use reagents to carry out the analysis.     

The Ends of Manifolds with Bounded Geometry, Linear Growth and Finite Filling Area

We prove that simply connected open manifolds of bounded geometry, linear growth and sublinear filling growth (e.g. finite filling area) are simply connected at infinity.     

Equilibrium and NMR Studies of Noncovalent Interactions in Binary Systems: Uridine,Adenosine, Cytidine and Thymidine,and Adenosine (or Cytidine) 5′-Monophosphate in Aqueous Solution

The molecular complex formation reactions of uridine (Urd) with adenosine (Ado), cytidine (Cyd), thymidine (Thd), adenosine 5-monophosphate (AMP) and cytidine 5-monophosphate (CMP) have been studied at 20°C. It was found that the main positive noncovalent centers of ion–dipole and dipole–dipole type interactions are the protonated N(3) atoms of Urd, whereas the negative centers are the endocyclic atoms of the bases characterized by high electron density from the second molecule involved in the reaction. Moreover, NMR results indicate the occurrence of stacking in the complex (Urd)H(Cyd), whereas in the complex, (Urd)H₂(Thd), it is the only type of interaction. Deprotonation of the latter species brings about a change in the character of the reaction and ion–dipole interactions have been detected in the adduct, (Urd)H(Thd). Interestingly, no involvement of the phosphate groups in the formation of AMP and CMP adducts has been evidenced and the main centers of the reactions were found to be the N(7)and N(1) atoms of AMP, or the N(3) atoms of CMP and Urd. Moreover, in the Urd/CMP system the NMR results suggest stacking-type interactions.     

Electron transport in corona charged 12 μm teflon FEP with saturable deep traps

Surface-potential measurements carried out in negatively corona charged 12 m samples of fluorethylenepropylene (Teflon FEP) showed the following characteristics: 1) with a constant charging current, the potential initially rises linearly, and then sublinearly; 2) the potential saturates irrespectively of the charging process and 3) practically no potential decay is observed after switching off the corona. These results have been interpreted in terms of an usual model (field-independent trapping time) for charge transport in insulators, with saturable deep traps in both surface and bulk of the sample and a relatively high electron mobility in order to prevent free-space charge accumulation. The partial differential equations derived from the model are numerically solved and it was found that only the product of the mobility with the trapping time is relevant to the fitting of experimental results, provided that >10^–8 cm²/Vs. A field-dependent trapping time model leads to poorer fittings.     

Parallel solution-phase synthesis of (Z)-3-(arylamino)-2,3-dehydroalanine derivatives and solid-phase synthesis of fused pyrimidones

N-Protected (Z)-3-(arylamino)-2,3-dehydroalanine esters 5 and 10 were prepared in one step from methyl (Z)-2-acylamino-3-(dimethylamino)prop-2-enoates 3 and 9 and anilines 4 employing a parallel solution-phase synthetic approach. In most cases, analytically pure products 5 and 10 were obtained. On the other hand, a three-step parallel solid-phase synthesis of 2-acetylamino-4H-azino[1,2-x]pyrimidin-4-ones 15 via the polymer-bound methyl (Z)-2-acetylamino-3-(dimethylamino)prop-2-enoate (12) was also developed.     

Sexual attraction in the silkworm moth: structure of the pheromone-binding-protein-bombykol complex

BACKGROUND: Insects use volatile organic molecules to communicate messages with remarkable sensitivity and specificity. In one of the most studied systems, female silkworm moths (Bombyx mori) attract male mates with the pheromone bombykol, a volatile 16-carbon alcohol. In the male moth's antennae, a pheromone-binding protein conveys bombykol to a membrane-bound receptor on a nerve cell. The structure of the pheromone-binding protein, its binding and recognition of bombykol, and its full role in signal transduction are not known. RESULTS: The three-dimensional structure of the B. mori pheromone-binding protein with bound bombykol has been determined by X-ray diffraction at 1.8 A resolution. CONCLUSIONS: The pheromone binding protein of B. mori has six helices, and bombykol binds in a completely enclosed hydrophobic cavity formed by four antiparallel helices. Bombykol is bound in this cavity through numerous hydrophobic interactions, and sequence alignments suggest critical residues for specific pheromone binding.     

Development and prevalidation of a method for phenol determination by solid-phase spectrophotometry

A simple, sensitive and rapid solid-phase spectrophotometric procedure was developed for the determination of traces of phenol with 4-aminoantipyrine as a reagent (AAP-SPS), and the optimal experimental conditions were established. This method was performed by sorption and direct absorbance measurements of the product phenol-AAP sorbed on the anion-exchanger Dowex 1-X4 (0.2 g) at 495 nm (absorption maximum) and 700 nm (non-absorption wavelength). The sensitivity offered by the AAP-SPS procedure was higher by a factor of 40 compared with the respective conventional spectrophotometric method. Metrological characteristics were established using a prevalidation strategy. The AAP-SPS procedure is characterized by a linear calibration function in the working range of 0.05–0.50 μmol, low standard deviation of procedure (±0.012), low limit of determination (0.021 μmol), and favorable random (±0.85 to ±11.27%) and systematic deviations (−4.55 to +11.50%). Moreover, the accuracy of the system investigated by the recovery test is acceptable (99–102%). Favorable working and performance characteristics make the new SPS method ideal for phenol monitoring in pharmaceutical preparations as well as other matrices.     

Kinetics of self-condensation of acetone over heterogeneous Ba(OH)2 and Sr(OH)2 catalysts

Catalytic performance of Ba(OH)₂ and Sr(OH)₂ in self-condensation of acetone was examined in the temperature range from 273 to 303 K. A kinetic model of second order with respect to acetone was used for interpretation of the results obtained for the diacetone alcohol formation.This revised version was published online in December 2005 with corrections to the Cover Date.     

Asymmetry of electron transmission through monolayers of helical polyalanine adsorbed on gold surfaces

Polyalanine derivatives containing cysteamine linker R-(Ala)14NH-(CH2)2-SH, where R is ferrocenecarbonyl or hydrogen, were synthesized and then used to form self-assembled monolayers on gold. The tilt angles and the packing density of the molecules within monolayer assemblies were determined by FTIR spectroscopy and scanning tunneling microscopy, respectively. Electrochemical properties of monolayer-modified electrodes were studied using cyclic voltammetry and impedance spectroscopy. Measurements of electron-transfer rates using electrochemical techniques and scanning tunneling spectroscopy revealed asymmetry dependent on the applied voltage. It is suggested that the observed electron-transfer behavior is connected with the electric field generated by the molecular dipole of the polyalanine helix.