Development of high-speed video cameras for Dynamic PIV

The most promising next generation Image Velocimtry (IV) is the high-speed Dynamic PIV. It requires the development of innovative high-speed video camera sensors. We started by specifying the required performance of these new sensors, for measurements in air and water flows. These criteria founded on the most recent developments in PIV algorithms and incorporate results from a large questionnaire survey of users of high-speed video cameras in Japan. The results suggest that the followings are required: (1) frame rate of 1,000,000 fps, (2) pixel count of 1,000,000 pixels, (3) frame storage capacity of 100–200 frames for tracing a single event and 10,000 frames for turbulent measurements, (4) gray levels of 4–8 bits for PTV; 12 bits for observation. Finally, we reviewed the state of the art of high-speed video-image sensors. Currently the standard parallel-readout sensors can operate at 1 Kfps with a pixel count of approximately 1 Kpixels. The In-situ Storage Image Sensor (ISIS) developed by the authors has recently achieved frame rates of 1 Mfps.     

Self-Restoration Properties of VWP Networks by Spare Wavelength Optimization

The self-restoration properties in VWP networks are investigated with optimization about spare wavelength by simulations. Rapid restoration can be achieved by selection of rerouting path with long delay and no delay-limitation for new routes.     

Magnetic pole pinning at rectangular defects on MnAs/GaAs(0 0 1)

Strong magnetic poles at characteristic rectangular defects have been observed using a magnetic force microscope on a MnAs(  1 0 0) thin film with the thickness of 30 nm. The MnAs thin film was epitaxially grown on a GaAs(0 0 1) substrate. The magnetic poles were in one-arranging direction, being independent of the magnetization direction of the film. The poles were pinned at the edges of the rectangular defects until just below the Curie temperature, and formed a stable magnetic-field loop on the MnAs surface. The stability of the magnetic pole pinning shows the distinctive feature of the magnetic domain structure on the surface with a strong anisotropy, which was built in the heterostructure of MnAs and GaAs.     

Development of measuring magnetic Compton profiles by grazing incidence geometry

A novel technique of measuring a magnetic Compton profile using the grazing angle geometry against a sample surface (Grazing Incidence Magnetic Compton Profile) has been successively developed. Measurements of a magnetic moment and a magnetic Compton profile are possible for a Fe 200 nm film on a thick glass substrate. The estimated thinnest limit for measurements is 100 nm for a Fe film.     

Vinyl‐terminated side‐chain liquid‐crystalline polyethers containing mesogenic benzylideneaniline moieties

The synthesis of two vinyl‐terminated side‐chain liquid‐crystalline polyethers containing benzylideneaniline moieties as mesogenic cores was approached in two different ways: by chemically modifying poly(epichlorohydrin) with suitable mesogenic acids or by polymerizing analogous glycidyl ester or glycidyl ether derivatives. In all the conditions tested, the first approach led to materials in which the imine group was hydrolyzed. The second approach led to the desired polymers PG2a and PG2b , but only from the glycidyl ether derivatives and when the initiator was the system that combined polyiminophosphazene base t‐Bu‐P₄ and 3,5‐di‐t‐butylphenol. These polymers were chemically characterized by IR and ¹H and ¹³C NMR spectroscopies. The estimated degrees of polymerization ranged from 30 to 36. The liquid crystalline behavior of the synthesized polymers was studied by differential scanning calorimetry, polarized optical microscopy (POM) and X‐ray diffraction. Both polymers behave like liquid crystals and exhibited a single mesophase, which was recognized as a smectic C mesophase, probably with a bilayer arrangement, i.e., a smectic C₂ mesophase. The crosslinking of both polymers was performed with dicumyl peroxide as initiator, which led to liquid crystalline thermosets. POM and X‐ray diffraction confirmed that the mesophase organization mantained on the crosslinked materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1877–1889, 2006     

Iron speciation related to color of Jurassic sedimentary rocks in Turpan Basin, northwest China

Mesozoic-Cenozoic reddish and green beds are widely distributed in northwest China. Mössbauer spectroscopy revealed that the composition of iron species varies with color in the middle-upper Jurassic sedimentary rocks from the Turpan Basin. Three main kinds of iron species were identified: (1) ferric iron of hematite (hem-Fe³⁺), (2) paramagnetic ferric iron (para-Fe³⁺), and (3) paramagnetic ferrous iron (para-Fe²⁺). Pyrite iron (pyr-Fe²⁺) was revealed only in a few samples. In general, there is a direct correlation between rock color, iron species and total iron content, however, in detail, this relationship is more complicated. The reddish rocks contain higher contents of total iron and hem-Fe³⁺, whereas the gray rocks contain much more para-Fe²⁺. However, relatively low hematite content cannot give red color to rocks, probably due to suppression by other pigments such as organic matter in black or chlorite in green. The dark or green rocks normally contain either only paramagnetic Fe²⁺ and paramagnetic Fe³⁺ species or these two species associated with hematite Fe³⁺, but the relative content of hematite species is lower. The variations of different iron species control lithological properties such as color and also may reflect the sedimentary conditions. Moreover, iron speciation in these rocks is one of the main factors, which result the color features of rocks in remote sensing imagery.This revised version was published online in November 2005 with corrections to the Cover Date.     

Effect of explicit cationic size and valence constraints on the phase stability of 1:2 B-site-ordered perovskite ruthenates

The related parameters of cation size and valence that control the crystallization of Sr(3)CaRu(2)O(9) into a 1:2 B-site-ordered perovskite structure were explored by cationic substitution at the strontium and calcium sites and by the application of high pressure. At ambient pressures, Sr(3)MRu(2)O(9) stoichiometries yield multiphasic mixtures for M = Ni(2+), Mg(2+), and Y(3+), whereas pseudocubic perovskites result for M = Cu(2+) and Zn(2+). For A-site substitutions, an ordered perovskite structure results for Sr(3-x)Ca(x)CaRu(2)O(9), with 0 相似文献   

A new entry into the synthesis of the strychnos indole alkaloids containing 19,20-double bond via the thio-claiser rearrangement

A simple and selective route to the Strychnos framework containing 19,20-double bond has been developed employing the thio-Claisen rearrangement.     

Novel Host Compounds, 1,1′-Binaphthyl-2,2′-Dihydroxy-5,5′- and 6,6′-Dicarboxylic Acid, which Trap Guest Molecules Tightly in their Inclusion Crystals

The host compounds 1,1’-binaphthyl-2,2′-dihydroxy-5,5′-dicarboxylic acid (1) and 1,1′-binaphthyl-2,2′-dihydroxy-6,6′-dicarboxylic acid (2) have been synthesized, and their inclusion properties have been studied. Inclusion complexes formed by 1 and 2 with volatile guests such as acetone and methanol release the guests only at much higher temperatures than their boiling points. The crystal structures of the inclusion complexes have been determined from single crystal X-ray diffraction data and show different host lattices.