On Commutativity of Rings With Derivations

Let R be a ring and d : R → R a derivation of R. In the present paper we investigate commutativity of R satisfying any one of the properties (i)d([x,y]) = [x,y], (ii)d(x o y) = xoy, (iii)d(x) o d(y) = 0, or (iv)d(x) o d(y) = x o y, for all x, y in some apropriate subset of R.     

利用倏逝波的有效穿透深度推导Goos-Hnchen位移

利用电磁波在界面上发生全反射倏逝波的有效穿透深度推导出了Goos-H nchen位移,并提出了一个与实际全反射过程等效的假设.     

改性磁性壳聚糖微球对Cu2+、Cd2+和Ni2+的吸附性能

Fe3O4/ chitosan magnetic microspheres of 50 to 80 滋m were prepared using the inverse phase emulsion dispersion and chemical crosslinking technology, and then modified with ethylenediamine for use in the adsorption of heavy metal ions. The adsorption properties of the modified Fe3O4/chitosan toward Cu2+, Cd2+ and Ni2+ were investigated. It was found that the adsorption capacities of Cu2+ and Ni2+ increased with pH, and a maximum adsorption for Cd2+ occurred at pH=3. The saturated adsorption capacities calculated by Langmuir isotherms were 54.3 mg·g-1 for Cu2+, 20.4 mg·g-1 for Cd2+, and 12.4 mg·g-1 for Ni2+, respectively. The adsorption kinetics were well described by pseudo-second-order equation models. The experimental results showed that the Fe3O4/chitosan modified with ethylenediamine presented higher adsorption selectivity for Cu2+ than for Cd2+ and Ni2+ in all studied pH ranges.     

Depolymerization Study of Pakistani Lignite Coal Influence of Pre‐treatments on Product Slate

Influence of pretreatments, i.e., demineralization and pre‐soaking in some solvents on the yields of liquefied products obtained from hydro‐depolymerization of Pakistani coal in a pool of hydrogen has been discussed. Results of hydrogenation experiments demonstrated that demineralizing the coal sample prior to liquefaction caused the yields to decrease compared with the virgin coal samples. The contribution of mineral matter of coal has been evaluated by comparing the yields of liquid products of virgin and leached samples. Increase in the yields obtained from the hydrogenation experiments of swollen coal samples was not satisfactorily significant.     

Preparation and Properties of Aramid-Silica Hybrids with Inter-Phase Bonding Through (3-glycidoxypropyl)-trimethoxysilane

Nano-composites from aramid-silica system have been prepared via sol-gel process. Poly (phenyleneterephthalamide) copolymer chains were prepared by reacting a mixture of p- and m-phenylenediamines with terephthaloyl chloride in dimethylacetamide used as solvent. The sol-gel process in the polymer matrix was carried out through hydrolysis and condensation of a mixture of tetraethoxysilane and (3-glycidoxypropyl) trimethoxysilane. The latter was used to develop linkage, on one hand with silica network structure using alkoxy groups and on the other hand with aramid chains at its secondary amine groups through glycidal groups of silane. Mutual interaction between the two disparate phases aramid and silica network was thus created. Thin films of the composites containing different proportions of silica ranging from 5.0 to 25.0-wt% were cast by the solvent elution technique. The α-relaxation temperature associated with the glass transition was measured by the dynamic mechanical thermal analysis. The results showed an increase in the glass transition temperature from 328°C for the pure aramid to 352°C for the hybrid materials containing 25-wt% silica, an indicative of the increased interfacial interaction between the two phases. Films having relatively low silica content were flexible and transparent, but those with high silica content were opaque and brittle. These films were tested for their tensile strength, modulus and toughness. The mechanical strength of the composites as compared to the pure aramid increased initially but with further addition of silica the strength decreased. The initial increase can be explained due to increased interfacial interaction between the two phases, however agglomeration of silica particles was responsible for decreasing strength at higher silica contents.     

Metal organic chemical vapour deposition (MOCVD) of bone mineral like carbonated hydroxyapatite coatings

For the first time, the MOCVD technique has been used to deposit carbonated hydroxyapatite onto Ti6AL4V substrates using volatile monomeric (liquid) complexes [Ca(beta-diketonate)(2)(L)] and P(OEt)(3).     

Tests for liquid chromatographs

Summary The paper describes tests for liquid chromatographs to assess the autosampler and pump flow rate precision; suitability of the instrument for normal phase chromatography; UV detector performance; and external band broadening characteristics. Tests for mixing and proportioning characteristics of solvent pumps and performance of diode array detectors are also considered. These tests are designed to evaluate the performance of both newly released liquid chromatography equipment and equipment already in operation. Data from evaluations carried out by instrument manufacturer’s and suppliers is reported and discussed. This data offers specifications to a common format for initial selection of instruments prior to purchase.     

Synergistic extraction of Ce(III), Eu(III) and Tm(III) with a mixture of picrolonic acid and benzo-15-crown-5 in chloroform

Summary The synergistic mixture comprising picrolonic acid (HPA) and benzo-15-crown-5 (B15C5) in chloroform has been used for the extraction of Ce(III), Eu(III) and Tm(III) as representatives of lanthanide(III) ions from pH 1-2 solutions having ionic strength of 0.1 mol^. dm^-3(K⁺/H⁺, Cl^-). The composition of the extracted species has been determined as M(PA)₃^. nB15C5 where M is Ce, Eu and Tm and n=1 or 2. The influence of various anions and cations on the extraction of these ions has also been studied and only oxalate, cyanide and tartrate have some deleterious effect. The extraction equilibrium constants have been evaluated and discussed.     

Microstructure and magnetic characterization of the Sm-CoMn co-substituted SrCaM hexagonal ferrites

A series of Sm-CoMn substituted hexagonal ferrites with chemical composition of Sr_0.85-xCa_0.15Sm_xFe_12-y(Co_0.5Mn_0.5)_yO₁₉ (0.00?≤?x?≤?0.60, (0.00?≤?y?≤?0.50) were synthesized by the solid-state reaction method. Microstructure and magnetic properties of the hexaferrites have been investigated by the X-ray diffraction, field emission scanning electron microscopy and a permanent magnetic measuring system. A single magnetoplumbite phase is exhibited in the hexaferrites with the substitutiom of Sm (0.00?≤?x?≤?0.12) and CoMn (0.00?≤?y?≤?0.10) contents. For the hexaferrites containing Sm (x?≥?0.24) and CoMn (y?≥?0.20), impurity phases are observed in the structure. The FESEM micrographs exhibit that the hexaferrites with different Sm-CoMn contents have formed hexagonal structures and the grain size of the hexaferrites remains unchanged with increasing Sm-CoMn content. The remanence (B_r), H_k/H_cj ratios, and maximum energy product [(BH)_max] decrease with increasing Sm-CoMn content (0.00?≤?x?≤?0.60, (0.00?≤?y?≤?0.50). Instrinsic coercivity (H_cj) and magnetic induction coercivity (H_cb) increase with increasing Sm-CoMn content (0.00?≤?x?≤?0.12, 0.00?≤?y?≤?0.10), and then decrease with increasing Sm-CoMn content (0.12?≤?x?≤?0.36, 0.10?≤?y?≤?0.30), while for the hexaferrites with Sm (x?≥?0.36) and CoMn (y?≥?0.30), with increasing Sm-CoMn content, H_cj increases and H_cb decreases.