Kinetic aspects of the Diels-Alder reaction between poly(styrene-co-furfuryl methacrylate) and bismaleimide

The crosslinking Diels-Alder reaction between styrene-furfuryl methacrylate copolymer samples (poly(ST-co-FM)) and bismaleimide (BM) at 25 °C in chloroform was studied by following the decay in UV absorbance of the maleimide (MI) group at 320 nm. Reaction conditions were changed by using copolymers with different mole fraction of FM, F_FM, and by employing different initial molar ratios of reactants (furan group within FM and MI group within BM). Second order kinetics were obeyed. ¹³C NMR spectra showed that, even when all reactants had been converted to an insoluble crosslinked network, unreacted MI groups remained, presumably in the form of singly reacted pendant BM molecules. The fractions of MI groups remaining unreacted were found to be 0.49, 0.34 and 0.22 for FM:MI mole ratios in the initial mixture of 2, 1 and 0.5 respectively, when using a copolymer of F_FM=0.1354. An attempt was also made to follow the kinetics of network formation by ¹³C NMR spectroscopy, using the peak areas for reacted and unreacted MI and FM groups, but many of the findings were subject to some uncertainty for reasons, which are discussed. However, because the peak areas were considered reliable for unreacted MI groups, the rate constant, k, was evaluated, thereby. Overall using UV and NMR the values of k lay within the interval (0.8-3.6) × 10⁻⁵ dm³ mol⁻¹ s⁻¹.     

The development of a versatile field program for measuring tritium in “real-time”

Robust sample handling and liquid scintillation counting (LSC) procedures have been developed to routinely monitor tritium in the field relative to the 20,000 pCi/L drinking water standard. This procedure allows tritium to be monitored hourly during 24 hour drilling operations at depths in the saturated zone potentially contaminated by sub-surface nuclear weapons testing at the Nevada Test Site. Using retrofitted, shock hardened, vibration damped counters and strict analytical protocols, tritium may be measured rapidly in the field under hostile conditions. Concentration standards and dead tritium backgrounds are prepared weekly in a central laboratory and delivered to remote drilling locations where they are recounted daily as a check on counter efficiency and calibration. Portable LSC counters are located in trailers and powered off a battery pack and line filter fed by mobile generator. The samples are typically groundwaters mixed with drilling fluids returned after circulation through a drill string. Fluids are aerated and de-foamed, filtered, mixed with scintillation cocktail and dark adapted before counting. Real-time monitoring affords drilling and field personnel early warning against intercepting down-gradient plumes of radioactivity. For routine operations, the tritium activity may not exceed a 10,000 pCi/L threshold.     

A liquid chromatography coupled to quadrupole–time-of-flight–mass spectrometry (LC–QTOF–MS) method for identification analysis of saponins from Quillaja saponaria bark extracts in foot-and-mouth disease vaccines: Development,validation and applicability

Saponins from Quillaja saponaria have been commonly used as immunomodulatory adjuvants in foot-and-mouth disease vaccines (FMDVs). However, due to the lack of consensus over the possible exacerbation of local inflammatory responses in cattle and its economic impacts, their use has been discouraged by Brazilian authorities. A qualitative method intended to determine the presence of saponins from Q. saponaria bark extracts in FMDVs was developed and validated. Instrumental analysis was performed using an liquid chromatography (LC) coupled to a quadrupole–time-of-flight–mass spectrometry (TOF-MS) system. The method was validated according to the International Conference on Harmonization Harmonized Tripartite Guideline Q2 (R1) and Brazilian Ministry of Agriculture, Livestock and Food Supply Analytical Quality Assurance Guidelines. Validation parameters were determined and considered suitable to the established criteria. The validated method has been applied in routine analysis in the National Agricultural Laboratory at Rio Grande do Sul (LANAGRO-RS). All results obtained were in agreement with the vaccine's composition described by the manufacturer. The method is easy and adequate for analysis in routine laboratories. To the best of the authors' knowledge, this is the first report of a method which intends to investigate the presence of saponins from Q. saponaria bark extracts in veterinary vaccines.     

Influence of thermal fluctuations on interfacial electron transfer in functionalized TiO2 semiconductors

The influence of thermal fluctuations on the dynamics of interfacial electron transfer in sensitized TiO2-anatase semiconductors is investigated by combining ab initio DFT molecular dynamics simulations and quantum dynamics propagation of transient electronic excitations. It is shown that thermal nuclear fluctuations speed up the underlying interfacial electron transfer dynamics by introducing nonadiabatic transitions between electron acceptor states, localized in the vicinity of the photoexcited adsorbate, and delocalized states extended throughout the semiconductor material, creating additional relaxation pathways for carrier diffusion. Furthermore, it is shown that room-temperature thermal fluctuations reduce the anisotropic character of charge diffusion along different directions in the anatase crystal and make similar the rates for electron injection from adsorbate states of different character. The reported results are particularly relevant to the understanding of temperature effects on surface charge separation mechanisms in molecular-based photo-optic devices.     

Li‐doped nanosized TiO2 powder with enhanced photocalatylic acivity under sunlight irradiation

This work reports on the synthesis of Li‐doped TiO₂ nanoparticles using the sol–gel process and solid‐state sintering, and investigates their potential use as a photocatalyst for degradation under sunlight excitation of different organic model compounds in aqueous solution. The structure of the nanocrystals was examined by X‐ray diffraction, UV‐vis ground state diffuse reflectance absorption spectra and X‐ray photoelectron emission spectroscopy. Results showed that samples prepared by sol–gel process and calcined at 400 °C are composed of a mixture of anatase and rutile phases, in contrast to the one prepared by solid‐state sintering, which exhibits an anatase phase with Li being involved in a spinel phase. The photocatalytic degradation of aqueous solutions of different aromatic compounds was successfully achieved under sunlight excitation in presence of Li‐doped TiO₂ prepared via sol–gel process. It was shown that the calcination temperature and the preparation mode greatly affect the photocatalytic efficiency. Copyright © 2010 John Wiley & Sons, Ltd.     

X-ray determination of the mean amplitudes of vibration and debye temperatures of some rare earth monochalcogenides

The x-ray diffraction intensities of Bragg reflections have been measured at room temperature for thulium selenide, samarium sulphide, samarium selenide and samarium telluride. On the basis of a common amplitude approximation, the Debye-Waller factor, the mean amplitude of vibration and the Debye temperature have been evaluated. The values of the Debye temperatures and mean amplitudes of vibration are 176±16°K, 0·185 ± 0·017 Å (TmSe), 155 ± 7°K, 0·244 ± 0·012 Å (SmS), 153 ± 14°K, 0·221 ± 0·020 Å (SmSe) and 151 ± 20°K, 0·204 ± 0·027 Å (SmTe).     

Precise positioning of carbon nanotubes by ac dielectrophoresis using floating posts

Single-walled carbon nanotubes (SWNTs) have been precisely aligned and positioned in device architectures using ac dielectrophoresis by patterning floating metal posts or strips within the electrode gaps. These structures perturb the electric field, causing local enhancements in the field intensity, as seen in simulation, that guide the nanotubes along a predictable path in given directions, in zigzag patterns, or as single or a sequence of tubes along a series of posts. This method enables the assembly of SWNTs in complex multi-electrode geometries, when specifying the electrode voltages is not sufficient to direct the desired assembly. The device characteristics of the dielectrophoretically-aligned SWNTs are discussed. PACS 61.46.Fg; 73.63.-b; 87.15.Tt