The glow curve structure for the LiF:Mg,Cu,Na,Si TL detector with dopants concentrations and sintering temperatures

The glow curve structures for LiF:Mg,Cu,Na,Si TL detectors with various dopant concentrations and sintering temperatures were investigated for the improvement of the glow curve structure and sensitivity of the TL detector. The dopant concentrations were varied over the following ranges: Mg (0–0.25 mol%), Cu (0–0.07 mol%), Na and Si (0–1.5 mol%). With increasing Cu concentration, the intensity of the main peak was intensified and reached a maximum at a concentration of 0.05 mol%. The high-temperature peak was reduced. The dependency of the main peak intensity on the Mg concentration exhibits a sharp maximum at 0.2 mol%. The intensity of the high-temperature peak tends to rise slightly with increasing Mg concentration. It was found that the optimum concentrations of the dopants in the LiF:Mg,Cu,Na,Si TL material are Mg: 0.2 mol%, Cu: 0.05 mol%, Na and Si: 0.9 mol%. The dependency of the main peak intensity on sintering temperature exhibits a very sharp maximum at 830°C. The high-temperature peak was rapidly reduced after 825°C.     

Desorption behavior of a surfactant in a linear low‐density polyethylene blend at elevated temperatures

The desorption behavior of a surfactant in a linear low‐density polyethylene (LLDPE) blend at elevated temperatures of 50, 70, and 80 °C was studied with Fourier transform infrared spectroscopy. The composition of the LLDPE blend was 70:30 LLDPE/low‐density polyethylene. Three different specimens (II, III, and IV) were prepared with various compositions of a small molecular penetrant, sorbitan palmitate (SPAN‐40), and a migration controller, poly(ethylene acrylic acid) (EAA), in the LLDPE blend. The calculated diffusion coefficient (D) of SPAN‐40 in specimens II, III, and IV, between 50 and 80 °C, varied from 1.74 × 10^?11 to 6.79 × 10^?11 cm²/s, from 1.10 × 10^?11 to 5.75 × 10^?11 cm²/s, and from 0.58 × 10^?11 to 4.75 × 10^?11 cm²/s, respectively. In addition, the calculated activation energies (E_D) of specimens II, III, and IV, from the plotting of ln D versus 1/T between 50 and 80 °C, were 42.9, 52.7, and 65.6 kJ/mol, respectively. These values were different from those obtained between 25 and 50 °C and were believed to have been influenced by the interference of Tinuvin (a UV stabilizer) at elevated temperatures higher than 50 °C. Although the desorption rate of SPAN‐40 increased with the temperature and decreased with the EAA content, the observed spectral behavior did not depend on the temperature and time. For all specimens stored over 50 °C, the peak at 1739 cm^?1 decreased in a few days and subsequently increased with a peak shift toward 1730 cm^?1. This arose from the carbonyl stretching vibration of Tinuvin, possibly because of oxidation or degradation at elevated temperatures. In addition, the incorporation of EAA into the LLDPE blend suppressed the desorption rate of SPAN‐40 and retarded the appearance of the 1730 cm^?1 peak. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1114–1126, 2004     

Positive Schatten(-Herz) Class Toeplitz Operators on the Half-space

On the harmonic Bergman space of the half-space, we give characterizations for an arbitrary positive Toeplitz operator to be a Schatten (or Schatten-Herz) class operator in terms of averaging functions and Berezin transforms. Examples are provided to show that various results are sharp. This research was supported by KOSEF(R01-2003-000-10243-0).     

Moment vanishing properties of harmonic Bergman functions

We show that Poisson integrals belonging to certain weighted harmonic Bergman spaces b_δ^p on the upper half-space must have the moment vanishing properties. As an application, we show that b₀^p, p?1, contains a dense subspace whose members have the horizontal moment vanishing properties. Also, we derive related weighted norm inequalities for Poisson integrals. As a consequence, we obtain a characterization for Poisson integrals of continuous functions with compact support in order to belong to b_δ^p.     

Influences of local polymer-solvent π-π-interaction on dynamics of phenyl ring rotation and its role on photophysics of conjugated polymer

In this report, the role of local polymer-solvent π-π-interaction on rotational dynamics of phenyl rings of poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylenevinylene] (MEH-PPV) is examined by utilizing nuclear magnetic resonance (NMR) spectroscopy. We have found that an aromatic solvent can couple strongly with the phenyl rings via favorable local π-π-interaction, causing a restriction of the ring rotation. The dynamic process takes place at much faster rate in a non-aromatic solvent. NMR line shape analysis indicates the existence of two side chain configurations with relatively long life-time in toluene and pyridine while a single time-averaged configuration is detected in chloroform and tetrahydrofuran. Addition of chloroform or cyclohexane to a solution of MEH-PPV in toluene is accompanied by an increase of the rotational dynamics. This indicates that the expansion or collapse of main chain upon varying solvent quality play a minor role on the rotational dynamics. The relationship between the dynamics of ring rotation and photophysics of MEH-PPV in solution is discussed.     

Nonequilibrium synthesis and assembly of hybrid inorganic-protein nanostructures using an engineered DNA binding protein

We show that a protein with no intrinsic inorganic synthesis activity can be endowed with the ability to control the formation of inorganic nanostructures under thermodynamically unfavorable (nonequilibrium) conditions, reproducing a key feature of biological hard-tissue growth and assembly. The nonequilibrium synthesis of Cu(2)O nanoparticles is accomplished using an engineered derivative of the DNA-binding protein TraI in a room-temperature precursor electrolyte. The functional TraI derivative (TraIi1753::CN225) is engineered to possess a cysteine-constrained 12-residue Cu(2)O binding sequence, designated CN225, that is inserted into a permissive site in TraI. When TraIi1753::CN225 is included in the precursor electrolyte, stable Cu(2)O nanoparticles form, even though the concentrations of [Cu(+)] and [OH(-)] are at 5% of the solubility product (K(sp,Cu2O)). Negative control experiments verify that Cu(2)O formation is controlled by inclusion of the CN225 binding sequence. Transmission electron microscopy and electron diffraction reveal a core-shell structure for the nonequilibrium nanoparticles: a 2 nm Cu(2)O core is surrounded by an adsorbed protein shell. Quantitative protein adsorption studies show that the unexpected stability of Cu(2)O is imparted by the nanomolar surface binding affinity of TraIi1753::CN225 for Cu(2)O (K(d) = 1.2 x 10(-)(8) M), which provides favorable interfacial energetics (-45 kJ/mol) for the core-shell configuration. The protein shell retains the DNA-binding traits of TraI, as evidenced by the spontaneous organization of nanoparticles onto circular double-stranded DNA.     

Synthesis of 5-alkylidene-2,5-dihydropyrrol-2-ones and their ring-transformation into 5,6-dihydrobenzo[h]chromones, 5,6,7,8-tetrahydrochromones and pyran-4-ones

Acid-mediated ring-transformations of 5-alkylidene-2,5-dihydropyrrol-2-ones, available by cyclization of 1,3-diketone dianions with bis(imidoyl) dichlorides of oxalic acid, resulted in formation of functionalized pyran-4-ones, such as 5,6-dihydrobenzo[h]chromones and 5,6,7,8-tetrahydrochromones.     

Determination of alachlor and two metabolites in groundwater using solid phase and a new micro-liquid-liquid extraction method

Two different extraction procedures to determine alachlor (2-chloro-2,6-diethyl-N-methoxymethyl-acetanilide) and its metabolites 2,6-diethylaniline (DEA) and 2-chloro-2,6-diethylacetanilide (CDEA) at very low concentration levels in groundwater are compared. Both methods were performed during a field leaching study and laboratory soil column experiments. Solid phase extraction (SPE) is characterized by the enrichment of 11 water samples at 1 g RP-C18 material, while micro liquid/liquid extraction (MLLE) means that 400 ml water samples saturated with sodium chloride were extracted once with 500 l of toluene. Both methods differ in their concentration factors, i.e. 5000 for SPE and 800 for MLLE. The determination limits for alachlor determined as the lowest spiked concentration analyzed are 10 ng/l with SPE and 25 ng/l with MLLE. Even though the determination limits of the two methods are similar, the volatile metabolite 2,6-diethylaniline was not sufficiently recovered by SPE. Furthermore, SPE is more expensive and time consuming than MLLE. The latter is simple in use, rapidly performed and needs no evaporation step and clean-up before GC analysis. This is of special advantage for the analysis of 2,6-diethylaniline. The determination limits of the metabolites CDEA and DEA analyzed by MLLE are 25 ng/l. The extracts from both methods were directly analyzed by gas chromatography using electron capture and nitrogen-phosphorus detection.     

Optimum conditions for preparing micron-sized PMMA beads in the dispersion polymerization using PVA

The optimum conditions for preparing micron-sized monodisperse polymethylmethacrylate (PMMA) beads by dispersion polymerization in a methanol/water mixture were proposed. PMMA forming microspheres having an average molecular weight of 55,300 g/mol, 2.6 μm weight-average diameter, with a 5.3% coefficient of variation and 91% conversion, were successfully obtained in the presence of 15 wt.% of polyvinylalcohol (PVA), 100/50 (g/g) of MeOH/water mixtures at 70°C; the reaction lasted for 8 h. Compared to dispersion polymerization using polyvinylpirrolydone, PVA proved to be an extremely stable steric stabilizer in the dispersion polymerization of methylmethacrylate.