Biosorption of Chromium(III) by Biomass of Seaweed Sargassum sp. in a Fixed-Bed Column

This work aimed at modeling chromium biosorption using the biomass of seaweed Sargassum sp. in a fixed-bed column. The mathematical model used was obtained from the mass balance of the component in the liquid phase and in the biosorbent material. The effects of both axial dispersion in the column and the resistance to mass transfer in the solid were considered for the solution of the partial differential equations of the model, using the Galerkin method on finite elements. To represent the equilibrium data of the batch system the Langmuir isotherm were used. The chromium ion adsorption capacity of the seaweed Sargassum sp., at a temperature of 30°C and pH 3.5, was 2.61 mmol/g. The model performance was evaluated from experimental data obtained at 30°C for flow rates of 2, 6 and 8 mL/min. The parameters of the model, mass transfer and axial dispersion coefficients, were adjusted from these experimental data. The model proved adequate to describe chromium biosorption dynamics in fixed-bed columns.     

On a Modified Subgradient Algorithm for Dual Problems via Sharp Augmented Lagrangian*

We study convergence properties of a modified subgradient algorithm, applied to the dual problem defined by the sharp augmented Lagrangian. The primal problem we consider is nonconvex and nondifferentiable, with equality constraints. We obtain primal and dual convergence results, as well as a condition for existence of a dual solution. Using a practical selection of the step-size parameters, we demonstrate the algorithm and its advantages on test problems, including an integer programming and an optimal control problem. *Partially Supported by 2003 UniSA ITEE Small Research Grant Ero2. Supported by CAPES, Brazil, Grant No. 0664-02/2, during her visit to the School of Mathematics and Statistics, UniSA.     

Robust Adaptive Identification of Fuzzy Systems with Uncertain Data

This study presents a method of adaptive identification of parameters describing Sugeno fuzzy inference system in presence of bounded disturbances while maintaining the readability and interpretability of the fuzzy model during and after identification. This method do not require any a priori knowledge of a bound on the disturbance and noise and of a bound on the unknown parameters values. The method can be used for the robust and adaptive identification of slowly time varying nonlinear systems using fuzzy inference systems. The suggested method was used to build a fuzzy expert system that approximates the functional relationship between physical fitness and some of the measurable physiological parameters by their real measurements and opinion (human-experiences) of a medical expert.     

AUTOMATED WIND TUNNEL MEASUREMENTS

It is common practice in power transmission to use bundled overhead electrical conductors because the lower rate of corona discharge, compared with single conductors, makes the bundle attractive for high voltages. However, secondary problems may arise from the vibrations induced by the aerodynamic forces which act on the leeward conductors as a result of their immersion in the wake of a windward conductor. Thus, in addition to possible aeolian and galloping oscillations observed for a single conductor, bundle conductors may also be subjected to wake-induced oscillations. ^1,2 Although extensive research has been done on the aeroelastic behavior of single and bundled conductors which are bare, little is known about the galloping or wake oscillation characteristics of given bundle conductors which, depending upon the environmental conditions during the formation of ice, may have five or so representative shaped cross-sections. One important task involves the aerodynamic quasi-static force and moment measurements in a wind tunnel using full scale conductor cross-sections each of which must be rotated through many angles at different spacings. Such measurements are repetitive as well as tediously time consuming and, hence, are beneficially automated. A reliable, accurate and inexpensive automated apparatus is described in this paper which permits the aerodynamic measurements to be performed efficiently and without intervention. Most importantly, it relieves the operator of the usual responsibility for manually controlling the separation and orientation of the sections as well as the need to manually compensate fluctuations in the free stream air speed. For simplicity, the apparatus is detailed in the context of a twin bundle conductor.     

The Synthesis of Levyne-Type Zeolite Studied by Thermal Analysis of Methylquinuclidine Aluminosilicate Gels

DSC, TG and quadrupole mass spectrometer data concerning methylquinuclidinium iodide (MeQ1), dried precursor gel, and crystalline levyne-type zeolite are discussed together with the thermal degradation of MeQ1 mixed with single inorganic components of the gel. It is shown that MeQ⁺ions play a role in the organization of the gel structure. This revised version was published online in July 2006 with corrections to the Cover Date.     

Metabonomics: the use of electrospray mass spectrometry coupled to reversed-phase liquid chromatography shows potential for the screening of rat urine in drug development

The application of liquid chromatography/mass spectrometry (LC/MS) followed by principal components analysis (PCA) has been successfully applied to the screening of rat urine following the administration of three candidate pharmaceuticals. With this methodology it was possible to differentiate the control samples from the dosed samples and to identify the components of the mass spectrum responsible for the separation. These data clearly show that LC/MS is a viable alternative, or complementary, technique to proton NMR for metabonomics applications in drug discovery and development.     

Synthesis of 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines

The reaction of 1,2-diaminobenzenes with substituted 1,2-dibenzoyl-1,2-dibromoethanes constitutes a convenient synthetic route to the hitherto 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines. Structures of all products were elucidated by ir, ¹H and ¹³C-nmr, mass spectra data. X-Ray crystallography data confirm assigned structures.     

Straightforward synthesis of sphinganines via a serine-derived Weinreb amide

Sphinganines can be synthesized in just three steps from easily prepared serine-derived Weinreb amide 4. Pre-deprotonation of the acidic (N-H and O-H) protons of 4 allows for its efficient conversion to amino ketones 5. Such ketones can be selectively reduced to either erythro- or threo-sphinganines. Partially protected sphinganines 11 are also readily accessible in five steps from 4. Thus, Weinreb amide 4 represents one of the most versatile templates described to date for sphinganine synthesis.