High-throughput concept for tailoring switchable mirrors

The optical properties, the switching kinetics and the lifetime of hydrogen switchable mirrors based on Mg-Ni alloys are determined with particular regard to the composition of the optically active metal-hydride layer in combination with the thickness of the catalytic capping layer. For this, a high-throughput experiment is introduced. The switching kinetics and the reversibility of switchable mirrors are strongly thickness dependent, though the details hinge on the fine structure of the clustered capping layer. Therefore, the kinetics is correlated with the surface structures of Pd on Mg_yNi_1−y as investigated by scanning tunneling microscopy. The results are explained by the so-called strong metal-support interaction (SMSI) state, characterized by a complete encapsulation of the capping layer clusters by oxidized species originating from the support. The SMSI-effect is less important with increasing Pd-layer thickness, and is suppressed by a good wetting of the Pd-clusters on the optically active film. This explains the critical thickness for the catalyzed hydrogen uptake observed in many switchable mirror systems. Moreover, the degradation of the kinetics during cycling is found to depend on the Pd-layer thickness and on the gas environment. Only films, covered with at least 15 nm Pd, show small degradation caused by the SMSI-effect. The SMSI-effect is partly reversible: after changing the gas environment from hydrogen to oxygen, the oxide on the Pd-clusters can be partly removed.     

The cyclodimerisation of 3-methyl-2-butenenitrile

3-Methyl-2-butenenitrile (1) cyclodimerised on treatment with lithium diisopropylamide in dimethoxyethane at temperatures between ?78°C and 0°C to 3-amino-4-cyano-1,5,5-trimethyl-1,3-cyclohexadiene (2) the structure of which was established by acid hydrolysis to the known 4-cyano-1,5,5-trimethyl-1-cyclohexene-3-one (3).     

Total synthesis of (-)-tuberostemonine

The first total synthesis of the complex pentacyclic Stemona alkaloid tuberostemonine was accomplished in 24 steps and in 1.4% overall yield from a hydroindole intermediate which is readily obtained in three steps from Cbz-l-tyrosine. An innovative synthetic strategy was applied that relays the single stereocenter of the amino acid precursor into nine of the ten stereogenic carbons of the target molecule. Among the highlights of the synthetic methodology are the 3-fold use of ruthenium catalysis, first in an azepine ring-closing metathesis and then in an alkene isomerization followed by a cross-metathesis propenyl-vinyl exchange, as well as the stereoselective attachment of the gamma-butyrolactone moiety to the core tetracycle by use of a lithiated ortho ester.     

Synthesis of fused indoles by sequential palladium-catalyzed Heck reaction and N-heteroannulation

A route to 3,4-fused indoles via two consecutive palladium-catalyzed reactions; an intramolecular Heck reaction followed by a reductive N-heteroannulation is described. Using this route, a number of indoles have been prepared having a variety of ring sizes anchored to the 3- and 4-position of the indole nucleus. Furthermore, a number of functional groups, both carbon and heteroatom substituents can be introduced in (and on) the additional ring without any detrimental effects on the two reactions.     

Conical parametric scattering of a single extraordinary beam in BaTiO3 crystal

In this paper, the parametric scattering of a single extraordinary polarized beam of laser in BaTiO₃ photorefractive crystal has been investigated experimentally and theoretically. The resulting pattern consists of beam fanning, isotropic ring, and anisotropic one. Among all parts of scattering pattern, isotropic ring has not been studied as much as beam fanning and anisotropic ring, and there still are some differences in reports about it. Therefore, the study has mainly focused on this part. In this experimental configuration, isotropic ring is just visible in positive angles although the other parts of parametric scattering pattern can be visible from behind and in front of the crystal. In addition to steady state pattern in forward and backward directions, its transient behavior with the rotation of crystal has been studied. The results of experiments have been analyzed carefully, and their theoretical explanations have been presented based on the standard theory of parametric scattering in photorefractive crystals. It has been shown that this configuration corresponds to the so called parametric B-process scattering.     

SERS nanosensors that report pH of endocytic compartments during FcεRI transit

Recently, the development of an IgE receptor (FcεRI)-targeted, pH-sensitive, surface-enhanced Raman spectroscopy (SERS) nanosensor has been demonstrated by Nowak-Lovato and Rector (Appl Spectrosc 63:387–395, 2009). The targeted nanosensor enables spatial and temporal pH measurements as internalized receptors progress through endosomal compartments in live cells. Trafficking of receptor-bound nanosensors was compared at physiological temperature (37 °C) versus room temperature (25 °C). As expected, we observed markedly slower progression of receptors through low-pH endocytic compartments at the lower temperature. We also demonstrate the utility of the nanosensors to measure directly changes in the pH of intracellular compartments after treatment with bafilomycin or amiloride. We report an increase in endosome compartment pH after treatment with bafilomycin, an H⁺ ATPase pump inhibitor. Decreased endosomal luminal pH was measured in cells treated with amiloride, an inhibitor of Na⁺/H⁺ exchange. The decrease in amiloride-treated cells was transient, followed by a recovery period of approximately 15–20 min to restore endosomal pH. These experiments demonstrate the novel application of Raman spectroscopy to monitor local pH environment in live cells with the use of targeted SERS nanosensors.     

An analysis of flow-induced miscibility of polymer blends

The phase behavior of blends of polystyrene and poly(vinyl methyl ether) undergoing shearing flow was examined. Experiments conducted at a constant level of flow-induced strain found that such flow elevates the phase boundary and pro-motes miscibility. In the framework of the Cahn-Hilliard model for spinodal decomposition, an expression was developed which predicts the effect of an external flow field on the spinodal. The basis for this expression is the minimization of strain energy in a two-component polymer system that is in a thermodynamic state near its phase-separation point. The zero shear viscosities of the blends were measured and demonstrated to be an indication of one- or two-phase flow.     

Self-chemical ionization of diethylzinc

The self-chemical ionization of diethylzinc is examined by Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry and semiempirical molecular orbital calculations. Electron impact of diethylzinc neutral produces the radical cation, C(4)H(15)Zn(+) (m/z x 122), which reacts further with the neutral (C(2)H(5))(2)Zn to give the following product ions: Zn(+) (m/z x 64), C(2)H(5)Zn(+) (m/z x 93), C(4)H(9)Zn(+) (m/z x 121), C(4)H(11)Zn(2)(+) (m/z x 187), and C(6)H(15)Zn(2)(+) (m/z x 215). To determine the structure and pathways for production of these ions, monoisotopic (12)C(4)H(15)(64)Zn(+), (64)Zn(+) and (12)C(2)H(5)(64)Zn(+) were individually isolated and reacted with the neutral background. We also performed semiempirical molecular orbital calculations (ZINDO/1). The molecular orbital calculations and experimental data are consistent in predicting that the ethyl group on the diethylzinc cation carries the positive charge. Copyright 1999 John Wiley & Sons, Ltd.