An investigation on planar dielectric light collectors for illumination and solar energy applications

In this paper the performances of inhomogeneous dielectric slabs as solar light collectors for both illumination and solar energy applications are analysed.     

Non-singular space-times with a negative cosmological constant: V. Boson stars

We prove existence of large families of solutions of Einstein-complex scalar field equations with a negative cosmological constant, with a stationary or static metric and a time-periodic complex scalar field.     

Identification of markers of thermal processing (“roasting”) in aqueous extracts of Coffea arabica L. seeds through NMR fingerprinting and chemometrics

Roasting of Coffea arabica L. seeds gives rise to chemical reactions that produce more than 800 compounds, some being responsible for the desired organoleptic properties for which the beverage called “coffee” is known. In the industry, the “roasting profile,” that is, the times and temperatures applied, is key to influence the composition of roasted coffee beans and the flavour of the beverage made from them. The impact of roasting on the chemical composition of coffee has been the subject of numerous studies, including by nuclear magnetic resonance (NMR) spectroscopy. However, the roasting equipment and profiles applied in these studies are often far from real industrial conditions. In this work, the effects of two critical technological parameters of the roasting process, namely, the “development time” (the period of time after the “first crack,” a characteristic noise due to seed disruption) and the final roasting temperature on coffee extracts, were investigated. Seeds were roasted at pilot scale according to 13 industrial roasting profiles and extracted in D₂O. The extracts were analysed by ¹H NMR experiments. The NMR spectra were compared using (a) quantitative analysis of main signals by successive orders of magnitude and (b) chemometric tools (principal component analysis, partial least squares and sparse-orthogonal partial least squares analysis). This allowed to identify compounds, which may serve as markers of roasting and showed that changes in chemical composition can be detected even for slight change in final temperature (~1°C) or in total roasting time (~25 s).     

Bonding in Barium Boryloxides,Siloxides, Phenoxides and Silazides: A Comparison with the Lighter Alkaline Earths

Barium complexes ligated by bulky boryloxides [OBR₂]⁻ (where R=CH(SiMe₃)₂, 2,4,6-ⁱPr₃-C₆H₂ or 2,4,6-(CF₃)₃-C₆H₂), siloxide [OSi(SiMe₃)₃]⁻, and/or phenoxide [O-2,6-Ph₂-C₆H₃]⁻, have been prepared. A diversity of coordination patterns is observed in the solid state for both homoleptic and heteroleptic complexes, with coordination numbers ranging between 2 and 4. The identity of the bridging ligand in heteroleptic dimers [Ba(μ₂-X₁)(X₂)]₂ depends largely on the given pair of ligands X₁ and X₂. Experimentally, the propensity to fill the bridging position increases according to [OB{CH(SiMe₃)₂}₂)]⁻<[N(SiMe₃)₂]⁻<[OSi(SiMe₃)₃]⁻<[O(2,6-Ph₂-C₆H₃)]⁻<[OB(2,4,6-ⁱPr₃-C₆H₂)₂]⁻. This trend is the overall expression of 3 properties: steric constraints, electronic density and σ- and π-donating capability of the negatively charged atom, and ability to generate Ba ⋅ ⋅ ⋅ F, Ba ⋅ ⋅ ⋅ C(π) or Ba ⋅ ⋅ ⋅ H−C secondary interactions. The comparison of the structural motifs in the complexes [Ae{μ₂-N(SiMe₃)₂}(OB{CH(SiMe₃)₂}₂)]₂ (Ae = Mg, Ca, Sr and Ba) suggest that these observations may be extended to all alkaline earths. DFT calculations highlight the largely prevailing ionic character of ligand-Ae bonding in all compounds. The ionic character of the Ae-ligand bond encourages bridging coordination, whereas the number of bridging ligands is controlled by steric factors. DFT computations also indicate that in [Ba(μ₂-X₁)(X₂)]₂ heteroleptic dimers, ligand predilection for bridging vs. terminal positions is dictated by the ability to establish secondary interactions between the metals and the ligands.     

Microwave-Assisted One-Pot Lipid Extraction and Glycolipid Production from Oleaginous Yeast Saitozyma podzolica in Sugar Alcohol-Based Media

Glycolipids are non-ionic surfactants occurring in numerous products of daily life. Due to their surface-activity, emulsifying properties, and foaming abilities, they can be applied in food, cosmetics, and pharmaceuticals. Enzymatic synthesis of glycolipids based on carbohydrates and free fatty acids or esters is often catalyzed using certain acyltransferases in reaction media of low water activity, e.g., organic solvents or notably Deep Eutectic Systems (DESs). Existing reports describing integrated processes for glycolipid production from renewables use many reaction steps, therefore this study aims at simplifying the procedure. By using microwave dielectric heating, DESs preparation was first accelerated considerably. A comparative study revealed a preparation time on average 16-fold faster than the conventional heating method in an incubator. Furthermore, lipids from robust oleaginous yeast biomass were successfully extracted up to 70% without using the pre-treatment method for cell disruption, limiting logically the energy input necessary for such process. Acidified DESs consisting of either xylitol or sorbitol and choline chloride mediated the one-pot process, allowing subsequent conversion of the lipids into mono-acylated palmitate, oleate, linoleate, and stearate sugar alcohol esters. Thus, we show strong evidence that addition of immobilized Candida antarctica Lipase B (Novozym 435^®), in acidified DES mixture, enables a simplified and fast glycolipid synthesis using directly oleaginous yeast biomass.     

EXAFS and XANES Structure determination of Mn2+ binding in ATP complexes

Summary The binding of Mn²⁺ ions to ATP molecules has been studied by means of the fine-structure analysis of X-ray absorption spectra (EXAFS and XANES) at theK-edge of Mn using the synchrotron, radiation facility PULS in Frascati. The results obtained in both freeze-dried and liquid samples of aqueous solutions at room temperature of the Mn-ATP complex under diffrent values ofpH and Mn:ATP ratio are reported and discussed. The Mn²⁺ ion appears to be octahedrally coordinated, the phosphate oxygen atoms being in the first co-ordination shell. Values of (2.15±0.05) ? and (3.4±0.05) ?, respectively, have been found for Mn-O and Mn-P distances. Theoretical considerations together with experimental results do not support the existence of a direct binding of the Mn to the N(7) atom of the adenine ring. The coordination numbers for the first and second shell are consistent with the formation of a Mn(ATP)₂ complex in solution atpH=9 and Mn: ATP=1:10, while a Mn-ATP 1:1 complex is found at lowerpH and higher Mn: ATP ratios. To speed up publication, the authors of this paper have agreed to not receive the proofs for correction.     

Substrates for flexible electronics: A practical investigation on the electrical,film flexibility,optical, temperature,and solvent resistance properties

Designing and developing flexible electronics requires a thorough investigation of the substrates available for the fabrication of devices. Here, we present a practical study on a variety of significant substrates: polyethylene terephthalate (PET), its heat‐stabilized (HS) derivative, HS‐PET, and polyethylene naphthalate (PEN) plastic insulating films; indium tin oxide (ITO)‐coated ITO/PEN and ITO/PET transparent conducting films; rigid ITO/glass and FTO/glass substrates; stainless steel and titanium foils. We put the substrates through a range of tests these actually undergo during device fabrication to determine their optical, mechanical flexibility (under different types of tensile and compressive stress bending with and without a PEDOT:PSS conducting polymer layer), solvent resistance, stability to temperature treatment (conductivity and deformation), and to UV irradiation. We highlight issues and propose solutions to improve substrate response. The results and thresholds extracted reveal limitations and windows of opportunity useful for the designer of flexible optoelectronics in determining manufacturing processes and the final applications under everyday operation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Study of bisphosphonates by matrix‐assisted laser desorption/ionization mass spectrometry – influence of alkali atoms on fragmentation patterns

1‐Hydroxymethylene‐1,1‐bisphosphonic acids (or bisphosphonates) are compounds that have interesting pharmacological applications. However, few mass spectrometric investigations have been carried out to determine their fragmentation patterns. Herein, we evaluated different matrices for the study by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOFMS) of the formation and fragmentation of the protonated, the cationized (MNa⁺ and MK⁺) and the deprotonated bisphosphonates. Some in‐source fragmentations were observed both in positive and in negative ion modes. The fragmentation patterns obtained in post‐source decay mode are also discussed. In contrast to previous electrospray ionization/multi‐stage mass spectrometry (ESI‐MSⁿ) studies, some new fragmentation pathways were deduced and the effects of alkali ions on the fragmentation patterns were shown. The results summarized here completed the data previously recorded by ESI‐MSⁿ and could be used for the characterization of bisphosphonates as alkali complexes in biological mixtures. Copyright © 2009 John Wiley & Sons, Ltd.