Rapid and accurate amperometric determination of acetaminophen in pharmaceutical preparations and spiked human blood serum samples at cadmium pentacyanonitrosylferrate modified glassy carbon electrode

The present work describes a rapid and accurate amperometric technique for the determination of acetaminophen (ACT) in pharmaceutical preparations and human blood serum, based on electrocatalytic oxidation of ACT at a glassy carbon electrode modified by cadmium pentacyanonitrosylferrate (CdPCNF) film. The electrocatalytic response of the modified GC electrode was linear over the concentration of 1.64-52.90 μM. The limit of detection was found to be 2.04 μM by amperometric technique. The method was successfully utilized for the determination of ACT in various pharmaceutical preparations and the results have been statistically compared with those obtained by the official method. The interference of some pharmaceutical and biological compounds was investigated. The results of interference study showed that the Nafion-coated CdPCNF|GC electrode can be utilized as a selective amperometric sensor for acetaminophen determination in human blood serum. The mean value of rate constant k for catalytic reaction, and the diffusion coefficient of ACT (D) in the phosphate buffer solution of pH 7.2 were found to be 4.27 × 10² M?¹ s?¹, and (4.25 ± 0.33) × 10^?6 cm² s^?1, respectively.     

Determination of percolation threshold electroactivity and phase behavior study on conducting blends of thermotropic polyesters and polyaniline

The new thermotropic polyester/polyaniline (PIn/PAni) blends have been prepared by solution blend of synthesized liquid crystalline poly[4,4′‐bis (ω‐alkoxy) biphenylisophthalate]s having four and six methylene units in spacer (PI4 and PI6) with PAni doped with camphorsolfonic acid (CSA). The percolation threshold electroactivity of prepared blend films has been determined by cyclic voltammetry. The effect of the PAni concentration, solvent nature and polyester structure on the electroactivity of the blends has been investigated. The extremely low percolation threshold of prepared PIn/PAni‐CSA blends from dimethylformamide (DMF) and m‐cresol solution was 3% weight of PAni‐CSA. The amount of conducting polymer necessary to retard the formation of the liquid crystalline (LC) phase is up to 45% by weight. Phase behavior studies by differential scanning calorimetry and polarizing microscopy show that blends with 45% of conducting polymer are both liquid crystal and conductive. The morphology of the blends has been investigated by scanning electron microscopy. Copyright © 2004 John Wiley & Sons, Ltd.     

The covariant electromagnetic Casimir effect for real conducting cylindrical shells

Using covariant quantization of the electromagnetic field, the Casimir force per unit area experienced by a long conducting cylindrical shell, under both Dirichlet and Neumann boundary conditions, is calculated. The renormalization procedure is based on the plasma cut-off frequency for real conductors. The real case of a gold (silver) cylindrical shell is considered and the corresponding electromagnetic Casimir pressure is computed. It is discussed that the Dirichlet and Neumann problems should be considered separately without adding their corresponding results.     

Comparative study of kinetic modeling for the oxidative coupling of methane by genetic and marquardt algorithms

Overall kinetic studies on the oxidative coupling of methane, OCM, have been conducted in a tubular fixed bed reactor, using perovskite titanate as the reaction catalyst. The appropriate operating conditions were found to be: temperature 750-775 ℃, total feed flow rate of 160 ml/min, CH4/O2 ratio of 2 and GHSV of 100 min-1. Under these conditions, C2 yield of 28% was achieved. Correlations of the kinetic data have been performed with lumped rate equations for C2 and COx formation as functions of temperature, O2 and CH4 partial pressures. Six models have been selected among the common lumped kinetic models. The selected models have been regressed with the experimental data which were obtained from the Catatest system by genetic algorithm in order to obtain optimized parameters. The kinetic coefficients in the overall reactions were optimized by different numerical optimization methods such as: the Levenberg-Marquardt and genetic algorithms and the results were compared with one another. It has been found that the Santamaria model is in good agreement with the experimental data. The Arrhenius parameters of this model have been obtained by linear regression. It should be noted that the Marquardt algorithm is sensitive to the first guesses and there is possibility to trap in the relative minimum.     

A model for πp,Kp and ψp total cross section ratios

We calculate the ratios of πp, Kp and ψp total cross sections utilizing coupled homogeneous linear integral equations supplemented with SU(4) symmetry for the couplings. Kinematic effects arising from mass splitting and t_min effects are crucial. We obtain $\text{σ}{}_{\mathrm{<mtext>\pi </mtext><mtext>p</mtext>}}\text{σ}{}_{\mathrm{<mtext>Kp</mtext>}}\text{≈ 1.7}\text{and}\text{σ}{}_{\mathrm{<mtext>\psi </mtext><mtext>p</mtext>}}\text{σ}{}_{\mathrm{<mtext>\pi </mtext><mtext>p</mtext>}}\text{≈}\text{1}\text{50}$.     

pH-sensing properties of PbO<Subscript>2</Subscript> thin film electrodeposited on carbon ceramic electrode

In this paper, a new highly sensitive potentiometric pH electrode is proposed based on the solid-state PbO₂ film electrodeposited on carbon ceramic electrode (CCE). Two different crystal structures of PbO₂, α and β were examined and the similar results were obtained. Moreover, the experimental results obtained for the proposed pH sensor and a conventional glass pH electrode were in good agreement. The electromotive force (emf) signal between the pH-sensitive PbO₂-coated CCE and SCE reference electrode was linear over the pH range of 1.5–12.5. Near-Nernstian slopes of −64.82 and −57.85 mV/pH unit were obtained for α- and β-PbO₂ electrodes, respectively. The interferences of some mono-valence and multi-valence ions on potentiometric response of the sensor were studied. The proposed pH sensor displayed high ion selectivity with respect to K⁺, Na⁺, Ca²⁺, and Li⁺, with log values around −12 and has a working lifetime of about 30 days. Key parameters important for the pH sensor performance, including kind of PbO₂ film, selectivity, response time, stability, and reproducibility, have been characterized. The proposed electrode showed a good efficiency for direct pH-metry after calibration and pH-metric titrations without calibration step. The response time was about 1 s in acidic medium and less than 30 s in alkaline solutions. The pH values of complex matrix samples such as fruit juices measured by the proposed sensor and a conventional glass pH electrode were in good agreement.     

Preparation,Electrochemistry, and Electrocatalytic Activity of Lead Pentacyanonitrosylferrate Film Immobilized on Carbon Ceramic Electrode

Lead pentacyanonitrosylferrate (PbPCNF), a new Prussian blue analog, was immobilized on the surface of a carbon ceramic electrode (CCE) prepared by sol‐gel method. The immobilization process consists of adding a certain amount of metallic lead to the electrode matrix before gelation, and chemical derivatization of Pb on the electrode surface to a PbPCNF solid film by immersing the electrode in a solution of sodium pentacyanonitrosylferrate (PCNF). The composition of the synthesized PbPCNF was characterized by FTIR, scanning electron microscopy (SEM), and energy‐dispersive X‐ray (EDX) techniques. The resulting modified electrode showed electroactivity at two redox centers. The electrochemical behavior of the PbPCNF modified carbon ceramic electrode (PbPCNF|CCE) was studied by cyclic voltammetry. Under optimized conditions the peak‐to‐peak separation is only 39 mV, indicative of a surface reaction. Ion effects of the supporting electrolyte suggest that cations have a considerable effect on the electrochemical behavior of the modified electrode. The transfer coefficient (α) and the charge transfer rate constant at the modifying film|electrode interface (k_s) were calculated. The electrocatalytic activity of the modified electrode toward the electro‐reduction of peroxodisulfate was studied in details.     

Electrodeposition of Ag nanoparticles on graphenized pencil lead electrode as a sensitive and low-cost sensor for iodate determination

In this study, a simple, sensitive and low-cost iodate electrochemical sensor based on graphenized pencil lead electrode (GPLE) modified with Ag nanoparticles (AgNPs) was presented. The GPLE was simply prepared via electrochemical exfoliation of pencil lead electrode (PLE) by applying an optimized potential in acidic media. Afterward, silver nanoparticles were electrochemically deposited on the surface of GPLE using chronoamperometry technique. The fabricated electrode was carefully characterized by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) techniques. Electrochemical behavior and also the electrocatalytic performance of the modified electrode toward the reduction of iodate were studied in details using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The fabricated sensor responds efficiently to iodate over the concentration range of 0.05 to 75 mM with a detection limit of 0.017 mM and sensitivity of 0.26 µA µM^?1 cm^?2. Remarkably enhanced electrocatalytic performance of the modified electrode was ascribed to the synergistic effect of graphene-like nanostructures with high surface to volume ratio, excellent conductivity and also the excessive electrocatalytic behavior of silver nanoparticles. The modified electrode was successfully employed for the determination of iodate in table and sea salt samples.