Microstructure dependent dynamic fracture analyses of trabecular bone based on nascent bone atomistic simulations

Trabecular bone fracture is closely related to the trabecular architecture, microdamage accumulation, and bone tissue properties. Primary constituents of trabecular tissue are hydroxyapatite (HA) mineralized type-I collagen fibers. In this research, dynamic fracture in two dimensional (2-D) micrographs of ovine (sheep) trabecular bone is modeled using the mesoscale cohesive finite element method (CFEM). The bone tissue fracture properties are obtained based on the atomistic strength analyses of a type-I collagen + HA interfacial arrangement using molecular dynamics (MD). Analyses show that the presented framework is capable of analyzing the architecture dependent fracture in 2-D micrographs of trabecular bone.     

Nonlinear electron transport properties of InAlAs/InGaAs based Y-branch junctions for microwave rectification at room temperature

A detailed analysis of nonlinear effects-electron switching and rectification, in InAlAs/InGaAs based Y-branch junction (YBJ) devices is presented to investigate the potential of YBJ for high frequency applications at 300 K. Results based on semi-classical simulations yield good qualitative agreement with measurements and previously reported theoretical and experimental results. The nonlinear parabolic behaviour of our device is attributed to device geometry and space charge effects. RF analysis shows that the YBJ has tremendous intrinsic potential to function as a frequency doubler and microwave rectifier when operated in the parabolic regime. The present analysis serves as a tool to optimize the bias conditions for RF measurements and to estimate the effect of interconnects and parasitic elements on the RF performance of real devices.     

Wavelength-scanning Talbot effect and its application for arbitrary three-dimensional step-height measurement

We demonstrate the phenomenon of Talbot self-image plane shift by tuning the wavelength of the broadband light source. A superluminescent diode (SLD) is used as a broad-band light source and an acousto-optic tunable filter (AOTF) as wavelength-scanning device. A periodic grating is illuminated by the wavelength tuned light of SLD using AOTF and Talbot self-image plane is shifted continuously in the longitudinal direction without mechanically moving the grating. The wavelength-scanning Talbot effect is then implemented for the measurement of arbitrary step-height of discontinuous objects with extended range. The main advantages of the proposed system are non-mechanical scanning, high stability because of it’s common-path geometry and compactness. Since the measurement of the phase is not required the system is free from phase ambiguity problem and therefore, the range of measurement is large as compare to interferometric techniques.     

The Linear Rational Pseudospectral Method with Preassigned Poles

We present a linear rational pseudospectral (collocation) method with preassigned poles for solving boundary value problems. It consists in attaching poles to the trial polynomial so as to make it a rational interpolant. Its convergence is proved by transforming the problem into an associated boundary value problem. Numerical examples demonstrate that the rational pseudospectral method is often more efficient than the polynomial method.     

Thin layer chromatographic studies of anils II. Separation,identification and determination

Thin layer chromatographic behaviour of ten anils was studied on silica gel adsorbent mixed with starch binder with ten solvent systems. Simultaneous separation, identification and determination of ternary mixtures of isomers was stressed. TheR _F increasing order was found to be dependent on the solvent and independent of the degree of saturation of the chamber. The correlations ofR _F with _max and (C=O) of isomers were established and used in their identification. Six anils were separated in methanol—benzene (11).     

Differential pulse polarographic determination of trace amounts of vanadium and molybdenum in various standard alloys and environmental samples after preconcentration of their morpholine-4-carbodithioates on microcrystalline naphthalene or morpholine-4-dithiocarbamate cetyltrimethyl-ammonium bromide-naphthalene adsorbent

A highly selective, sensitive, and fairly rapid and economical differential pulse polarographic (DPP) method has been reported for the determination of trace amounts of vanadium and molybdenum in standard alloys and various environmental samples. The morpholine-4-carbodithioates of these metals were retained (>99% recovery) quantitatively on microcrystalline naphthalene in the pH range 4.5-6.9 for vanadium and 1.5-4.5 for molybdenum. These metals were determined by DPP after desorption with 10 ml of 1 M HCl. Vanadium and molybdenum may also be preconcentrated by passing their aqueous solutions under similar conditions on morpholine-4-dithiocarbamate CTMAB-naphthalene adsorbent packed in a column at a flow rate of 1-5 ml min(-1) and determined similarly. The detection limits are 0.20 ppm for vanadium and 0.04 ppm for molybdenum at minimum instrumental settings (signal to noise ratio=2). The linearity is maintained in the following concentration ranges, vanadium 0.50-10.0 and molybdenum 0.10-9.0 ppm, with a correlation factor of 0.9996 (confidence interval of 95%, slopes 0.0196 and 0.01497 muA mug(-1), intercepts 3.65x10(-3) and -1.92x10(-3) respectively) and relative standard deviation of 1.1% in the microcrystalline method, while in the column method, the linearity is maintained in the concentration ranges, 0.50-6.5 for vanadium and 0.10-5.5 ppm for molybdenum with correlation factor of 0.9994 (with confidence interval of 95%, slopes 0.0194, 0.015 muA mug(-1), intercepts 3.60x10(-3) and -1.90x10(-3) respectively) and relative standard deviation of 1.4%. Various parameters such as the effect of pH, reagent, naphthalene and CTMAB concentrations, volume of aqueous phase and interference of a large number of metal ions on the estimation of vanadium and molybdenum have been studied in detail to optimize the conditions for their voltammetric determination at trace level in various standard alloys and environmental samples.     

Five-coordinate Cobalt(II), Nickel(II) and Zinc(II) Complexes Derived from 2-pyridine-2-yl-3-(pyridine-2-carboxylideneamino)-1,2-dihydroquinazolin-4(3H)-one. The Crystal Structure of the Cobalt(II) Complex

The synthesis of cobalt(II), nickel(II) and zinc(II) complexes of 2-pyridine-2-yl-3(pyridine-2-carboxylideneamino)-1,2-dihydroquinazolin-4(3H)-one is described. The ligand and metal complexes were characterized by elemental analysis, conductivity measurements, spectral (u.v.–vis., i.r., 1D n.m.r., 2D hetcor and mass) and thermal studies. The cobalt(II) complex crystallizes as pink crystals in the monoclinic crystal system, space group P21/n with a = 10.066(6) Å, b = 15.929(9) Å, c = 12.624(7) Å, α = 90.00(9)°, β = 110.850 (8)°, γ = 90.00, V = 1891.5 (18) ų and Z = 4. The geometry around the cobalt atom is distorted trigonal bipyramidal with τ = 0.83 [structural parameter, τ = (β − α)/60; where α and β are the two basal angles in a five coordinate complex].     

Structure, reactivity and aromaticity of acenes and their BN analogues: a density functional and electrostatic investigation

Density functional calculations have been carried out on a series of linearly annelated acenes and their BN analogues. Even though borazine shows aromatic and reactivity behavior parallel with that of benzene, its condensed derivatives show patterns different from those of their hydrocarbon analogues. Nucleus independent chemical shift (NICS) values in acenes suggest that the aromaticity of the inner rings is more than that of benzene, whereas in BN-acenes there is no substantial change in the aromaticity of the individual rings. Molecular electrostatic potential (MESP) is employed to obtain further insights into the bonding and reactivity trends for these systems. The MESP topography patterns of acenes and BN-acenes are substantially different, with BN-acenes showing more localized pi electron features compared to those of acenes. The MESP values at the critical points (CPs) indicate overall lowering of aromaticity in these annelated systems. However, this change is gradual among the BN-acenes.     

Kinetics and mechanism of the ruthenium(III)-catalyzed oxidation of hydroxy-acids byN-bromosuccinimide

Summary The kinetics of the Ru^III-catalyzed oxidation of the hydroxy acids; lactic, tartaric, malic and citric acids byN-bromosuccinimide in HClO₄ and in the presence of Hg(OAc)₂ have been studied. The reactions exhibit a first order rate dependence with respect to the oxidant and zeroth order rate dependence with respect to substrate. The rate is retarded by [H⁺], accelerated at law Ru^III concentrations but independent of [Ru^III] at higher Ru^III concentrations. A mechanism consistent with the observed kinetic data is proposed.