Partial structure elucidation of the most abundant octa and nonachlorotoxaphene congeners in marine mammals by using conventional electron ionization mass spectrometry and mass spectrometry/mass spectrometry

Summary Conventional electron ionization (EI) mass spectrometry (MS) and MS/MS techniques were applied to the analysis of two abundant octa and nonachlorobornanes isolated from seals of the Baltic sea and originating from technical toxaphene. The exact sterical structures of the two compounds were previously determined using nuclear magnetic resonance (NMR) spectroscopy by two independent research groups. The MS and MS/MS data generated in this study allowed partial structure elucidation of these polychlorobornanes, in particular revealing the distribution of the Cl substituents between the six-membered carbon ring, the bridge and the bridgehead in the parent bornane structure. Fragmentation of the six-membered carbon ring and the bridge by retro-Diels-Alder (RDA) and related mechanisms was discovered by studying specific parent/daughter ion transitions. The detailed fragmentation pathways formulated may be applicable to the structure elucidation of other toxaphene congeners and the monitoring of strategic transitions is highly selective for the detection of these compounds in technical toxaphene and in environmental samples.     

Comments concerning the HPLC separation of acrolein from other C3 carbonyl compounds as 2,4-dinitrophenylhydrazones: A proposal for improvement

The separation of the toxicologically important aldehyde acrolein from other carbonyl compounds by high performance liquid chromatography after derivatization to 2,4-dinitrophenylhydrazones is critically discussed on the basis of a selection of published methods. A method is proposed whereby the compounds acrolein, acetone, and propanal may be reproducibly separated to baseline by a reversed phase HPLC procedure employing a ternary mixture of methanol, water, and acetonitrile as mobile phase.     

Novel optically active 1,3-aminoalcohols derived from D-glucal

A series of ethyl(phenyl) 6-amino-2,3,6-trideoxy--D-glucopyranosides (amino=piperidino (Pip), pyrrolidino (Pyr), azetidino (Az), Bu₂N) have been prepared from tri-O-acetyl-D-glucal to obtain catalysts for asymmetric synthesis and the starting compounds for the syntheses of other bidentate ligands.Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 45–52, January, 2000.     

Method development for the quantitation of ABT-578 in rabbit artery tissue by 96-well liquid-liquid extraction and liquid chromatography/tandem mass spectrometric detection

Quantitative determination of drug concentrations in tissue samples can provide critical information for drug metabolism, kinetics, and toxicity evaluations. For analysis of tissue samples using liquid chromatography/tandem mass spectrometric (LC/MS/MS) detection, homogenization is a critical step in achieving good assay performance. Assay performance can be closely evaluated by spiking the drug directly into tissue samples prior to homogenization. It is especially important to include this assay evaluation for the analysis of artery tissue samples because artery tissue is very elastic, making it quite a challenge to develop an effective procedure for homogenization. An LC/MS/MS assay in 96-well format using liquid-liquid extraction was developed for analyzing ABT-578 in rabbit artery samples. Tissue quality control samples were prepared by spiking ABT-578 stock solutions directly into the tissue before homogenization. The usage of the tissue control samples gives a thorough evaluation of the sample preparation process that includes both homogenization and sample extraction. A 20% blood in saline solution was used as a homogenization solution. Calibration standards were made by spiking ABT-578 into rabbit whole blood. Blood quality control samples were also prepared by spiking ABT-578 into rabbit whole blood. These blood QC samples were used to confirm the validity of the calibration curve. A lower limit of quantitation of 0.050 ng/mL was achieved. The linear dynamic range of blood standards was from 0.050-30.3 ng/mL with the correlation coefficient (r) ranging from 0.9969-0.9996. Overall %CV was between 1.3 and 7.0%, and analytical recovery was between 98.2 and 105.8% for blood QC samples. The %CVs for tissue QC samples were between 6.7 and 13.0%, and analytical recovery after correction was between 93.5 and 114.3%.     

Microelectrode for potassium ions based on a neutral carrier and comparison of its characteristics with a cation exchanger sensor

A potassium-selective liquid-membrane microelectrode based on valinomycin is described. Tip diameters of about 2 μm as well as high discrimination against Na⁺, H₃O⁺, acetylcholine and some other quaternary ammonium ions, allow the intracellular measurement of potassium ion activity changes. The inherently high membrane resistance of the neutral carrier-based microelectrodes is reduced by adding a lipophilic charge carrier to the valinomycin. Results are compared with those of classical microelectrodes.     

Electron binding energies of aqueous alkali and halide ions: EUV photoelectron spectroscopy of liquid solutions and combined ab initio and molecular dynamics calculations

Photoelectron spectroscopy combined with the liquid microjet technique enables the direct probing of the electronic structure of aqueous solutions. We report measured and calculated lowest vertical electron binding energies of aqueous alkali cations and halide anions. In some cases, ejection from deeper electronic levels of the solute could be observed. Electron binding energies of a given aqueous ion are found to be independent of the counterion and the salt concentration. The experimental results are complemented by ab initio calculations, at the MP2 and CCSD(T) level, of the ionization energies of these prototype ions in the aqueous phase. The solvent effect was accounted for in the electronic structure calculations in two ways. An explicit inclusion of discrete water molecules using a set of snapshots from an equilibrium classical molecular dynamics simulations and a fractional charge representation of solvent molecules give good results for halide ions. The electron binding energies of alkali cations computed with this approach tend to be overestimated. On the other hand, the polarizable continuum model, which strictly provides adiabatic binding energies, performs well for the alkali cations but fails for the halides. Photon energies in the experiment were in the EUV region (typically 100 eV) for which the technique is probing the top layers of the liquid sample. Hence, the reported energies of aqueous ions are closely connected with both structures and chemical reactivity at the liquid interface, for example, in atmospheric aerosol particles, as well as fundamental bulk solvation properties.     

Quantification of fg-pg amounts by electron capture negative ion mass spectrometry — Parameter optimisation and practical advices

Electron capture negative ion mass spectrometry (ECNI-MS) is a very suitable and popular technique for the identification and quantification of fg-pg amounts of compounds with a sufficiently high electron affinity. Many users of the ECNI mode have faced a lot of frustrating problems due to instrument contamination and wrong recommendations concerning instrument optimisation. This article summarises 14 years of experience with ECNI-MS using a large number of different instruments. Recommendations are given concerning optimisation procedures of important parameters such as ion source pressure and temperature as well as electron energy. An ion pressure optimisation method is proposed using a gas chromatograph. ECNI-MS is very sensitive against trace amounts of contaminants in the mass spectrometer and requires very clean components in the reagent gas line. Recommendations are given concerning suitable parts. Different other contamination sources are also discussed. The construction of a simple and clean gas inlet system is presented. Furthermore, contamination-free cleaning methods for the ion source are suggested. A test method based on the detection of hexachlorobenzene in the full scan mode (m/z 34–300) is proposed. It allows to evaluate both the background level in the mass spectrometer and the overall system performance. Clean instruments should show a signal-to-noise ratio of the total ion current GC signal of at least 20:1 without applying any mass signal area reject threshold. A linearity test procedure is also suggested. It shows that the linear range of a clean and optimised instrument is at least 3 orders of magnitude in the ECNI mode.     

Origin and elimination of interferences from siliconization procedures in anodic stripping voltammetry

Interferences caused by organic impurities can be a serious problem in trace analysis for heavy metals by differential pulse anodic stripping voltammetry. Organic impurities, which originate from siliconization treatment of the capillary of the hanging mercury drop electrode, can cause high background currents, interfering signals and peak broadening, especially in the concentration range below 5 ppb. A new method of siliconization for glass capillaries which avoids these problems is reported. A reference electrode with a poly-acrylamide gel-stiffened internal electrolyte is recommended, to avoid difficulties such as adsorption of organic material on low-leakage diaphragms of the Vycor type, which are often used in trace analysis.     

Optical sensors for determination of heavy metal ions

A review is given on optical means for single shot testing (probing) as well as continuous monitoring (sensing) of heavy metal ions (HMs). Following an introduction into indicator based approaches, we discuss the types of indicator dyes and polymeric supports used, as well as existing sensing schemes for HMs. The wealth of information is compiled in the form of tables and critically reviewed. Notwithstanding the tremendous work performed so far, it is obvious that still severe limitations do exist in terms of selectivity, limits of detection, dynamic ranges, applicability to specific problems, and reversibility. On the other hand, such sensors have found — and will find — their application whenever rapid and cost-effective testing is required, where personnel is scarce or unskilled, and in field tests. Despite their limitations, the number of such sensors (and of irreversible probes) for HMs is likely to increase in future.     

Das Verhalten des 2,4,6-Tri-tert.butylphenyllithiums gegenüber Halogensilanen. Bildung und Umwandlung des Trichlorsilyllithiums,LiSiCl3

The Behaviour of 2,4,6-Tri-tert.butylphenyllithium towards Halosilanes. Formation and Conversion of Trichlorosilyllithium, LiSiCl₃ Trichlorosilyllithium, LiSiCl₃ 2 , is formed as the result of a fast metal halogen exchange reaction at ?78°C in THF between 2,4,6-tri-tert.butylphenyllithium 1 or mesityllithium and bromotrichlorosilane. Also the interaction of 1 with trichlorosilane gives 2 after partial deprotonation of HSiCl₃. 2 is not isolated; it's existence in the THF solution is proved by protonation or deuteration, resp., and by identification of the HSiCl₃ or DSiCl₃ formed that way by means of ¹H-NMR or infrared spectroscopy. Attempts to react 2 with various electrophiles failed; also efforts to trapp dichlorosilylene, the expected decomposition product of 2 , by isoprene, were unsuccessful. Studies of the thermal decomposition of LiSiCl₃–THF solutions led to the identification of polychloropolysilanes and of insertion products of SiCl₂ in tetrahydrofuran.