Method development for the quantitation of ABT-578 in rabbit artery tissue by 96-well liquid-liquid extraction and liquid chromatography/tandem mass spectrometric detection

Quantitative determination of drug concentrations in tissue samples can provide critical information for drug metabolism, kinetics, and toxicity evaluations. For analysis of tissue samples using liquid chromatography/tandem mass spectrometric (LC/MS/MS) detection, homogenization is a critical step in achieving good assay performance. Assay performance can be closely evaluated by spiking the drug directly into tissue samples prior to homogenization. It is especially important to include this assay evaluation for the analysis of artery tissue samples because artery tissue is very elastic, making it quite a challenge to develop an effective procedure for homogenization. An LC/MS/MS assay in 96-well format using liquid-liquid extraction was developed for analyzing ABT-578 in rabbit artery samples. Tissue quality control samples were prepared by spiking ABT-578 stock solutions directly into the tissue before homogenization. The usage of the tissue control samples gives a thorough evaluation of the sample preparation process that includes both homogenization and sample extraction. A 20% blood in saline solution was used as a homogenization solution. Calibration standards were made by spiking ABT-578 into rabbit whole blood. Blood quality control samples were also prepared by spiking ABT-578 into rabbit whole blood. These blood QC samples were used to confirm the validity of the calibration curve. A lower limit of quantitation of 0.050 ng/mL was achieved. The linear dynamic range of blood standards was from 0.050-30.3 ng/mL with the correlation coefficient (r) ranging from 0.9969-0.9996. Overall %CV was between 1.3 and 7.0%, and analytical recovery was between 98.2 and 105.8% for blood QC samples. The %CVs for tissue QC samples were between 6.7 and 13.0%, and analytical recovery after correction was between 93.5 and 114.3%.     

Electron binding energies of aqueous alkali and halide ions: EUV photoelectron spectroscopy of liquid solutions and combined ab initio and molecular dynamics calculations

Photoelectron spectroscopy combined with the liquid microjet technique enables the direct probing of the electronic structure of aqueous solutions. We report measured and calculated lowest vertical electron binding energies of aqueous alkali cations and halide anions. In some cases, ejection from deeper electronic levels of the solute could be observed. Electron binding energies of a given aqueous ion are found to be independent of the counterion and the salt concentration. The experimental results are complemented by ab initio calculations, at the MP2 and CCSD(T) level, of the ionization energies of these prototype ions in the aqueous phase. The solvent effect was accounted for in the electronic structure calculations in two ways. An explicit inclusion of discrete water molecules using a set of snapshots from an equilibrium classical molecular dynamics simulations and a fractional charge representation of solvent molecules give good results for halide ions. The electron binding energies of alkali cations computed with this approach tend to be overestimated. On the other hand, the polarizable continuum model, which strictly provides adiabatic binding energies, performs well for the alkali cations but fails for the halides. Photon energies in the experiment were in the EUV region (typically 100 eV) for which the technique is probing the top layers of the liquid sample. Hence, the reported energies of aqueous ions are closely connected with both structures and chemical reactivity at the liquid interface, for example, in atmospheric aerosol particles, as well as fundamental bulk solvation properties.     

Regio- and Stereochemical Aspects of the Palladium-Catalyzed Desilylation-Arylation of Substituted Vinylsilanes

The palladium-catalyzed desilylation-arylation of substituted vinylsilanes by p-iodoanisole in the presence of bidentate phosphine ligands is described. Apart from enhancing the rate of the reaction considerably, heteroatom-based functional groups in the vinylsilane moiety have a profound influence on the regiochemistry. A catalytic cycle for the chelation-controlled desilylation-arylation reaction involving five- and six-membered chelate rings is proposed.     

Sampling unfolding intermediates in calmodulin by single-molecule spectroscopy

We used single-pair fluorescence resonance energy transfer (spFRET) measurements to characterize denatured and partially denatured states of the multidomain calcium signaling protein calmodulin (CaM) in both its apo and Ca(2+)-bound forms. The results demonstrate the existence of an unfolding intermediate. A CaM mutant (CaM-T34C-T110C) was doubly labeled with fluorescent probes AlexaFlour 488 and Texas Red at opposing globular domains. Single-molecule distributions of the distance between fluorophores were obtained by spFRET at varying levels of the denaturant urea. Multiple conformational states of CaM were observed, and the amplitude of each conformation was dependent on urea concentration, with the amplitude of an extended conformation increasing upon denaturation. The distributions at intermediate urea concentrations could not be adequately described as a combination of native and denatured conformations, showing that CaM does not denature via a two-state process and demonstrating that at least one intermediate is present. The intermediate conformations formed upon addition of urea were different for Ca(2+)-CaM and apoCaM. An increase in the amplitude of a compact conformation in CaM was observed for apoCaM but not for Ca(2+)-CAM upon the addition of urea. The changes in the single-molecule distributions of CaM upon denaturation can be described by either a range of intermediate structures or by the presence of a single unfolding intermediate that grows in amplitude upon denaturation. A model for stepwise unfolding of CaM is suggested in which the domains of CaM unfold sequentially.     

Radon Measure-Valued Solutions for a Class of Quasilinear Parabolic Equations

Initial value problems for quasilinear parabolic equations having Radon measures as initial data have been widely investigated, looking for solutions which for positive times take values in some function space. In contrast, it is the purpose of this paper to define and investigate solutions that for positive times take values in the space of the Radon measures of the initial data. We call such solutions measure-valued, in contrast to function-valued solutionspreviously considered in the literature. We first show that there is a natural notion of measure-valued solution of problem (P) below, in spite of its nonlinear character. A major consequence of our definition is that, if the space dimension is greater than one, the concentrated part of the solution with respect to the Newtonian capacity is constant in time. Subsequently, we prove that there exists exactly one solution of the problem, such that the diffuse part with respect to the Newtonian capacity of the singular part of the solution (with respect to the Lebesgue measure) is concentrated for almost every positive time on the set where “the regular part (with respect to the Lebesgue measure) is large”. Moreover, using a family of entropy inequalities we demonstrate that the singular part of the solution is nonincreasing in time. Finally, the regularity problem is addressed, as we give conditions (depending on the space dimension, the initial data and the rate of convergence at infinity of the nonlinearity ψ) to ensure that the measure-valued solution of problem (P) is, in fact, function-valued.     

Analytical performance of glucometers in a tertiary care hospital

Point-of-care (POC) testing of glucose (glucometers) represents a convenient alternative to monitor glycemia since the measurement procedure is performed without delay after sampling of the capillary blood, thereby avoiding the metabolism by the blood cells of glucose present in plasma. Likely because of sample instability, there is no proficiency test provider in Brazil for this type of POC sample. In this context, this study aimed to evaluate the analytical performance of glucometers used in a tertiary care hospital. The glucometers used were the Accu-Chek Performa^® model from Roche Diagnostics, which use the principle of amperometry. The reference method was the reaction with modified hexokinase/glucose-6-phosphate in a Dimension^® device. The stability evaluation of the control samples showed that it can be performed up to 90 min after the collection of whole blood samples. In the two rounds performed, only one result of the 17 glucometers evaluated was out of the threshold of two standard deviation. Thus, this method for control of glucometers met the expectations and enabled comparing the glucometers in a hospital. Given the current quality guidelines, daily internal quality control of glucometers is recommended, besides at least two annual comparisons between the results of the glucometers and the reference method and one EQA every 3 months.     

On data-guided optimal control simulation of human motion

This work investigates the combination of optical motion capturing data with optimal control simulations of human motion, which can be important in a wide range of applications in the professional as well as the private sector, ranging from health and ergonomics over human-machine-interaction to sports and games [1–3]. There are methodically very different approaches to include optical measurement data in the simulation of human motion, see e.g. [4–6]. Two different approaches to combine data and simulation are investigated in this work. Either we use a soft constraints approach, where the difference of simulated and measured marker positions is part of the objective function (1), or we formulate an hard constraints approach with nonlinear constraints that set an upper bound on this difference (2), while the objective function is purely physiologically motivated. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and Chemistry of New Central and Planar Chiral Sulfur-Containing Ferrocenyl Compounds

Abstract

Enantiomerically pure 2-hydroxyalkyl, 2-aminoalkyl and 2-iminoalkyl ferrocenyl p-tolylsulfides are easily prepared in good yields and with complete diastereocontrol from (S)-(2-p-tolylthio)ferrocencarboxyaldehyde. 2-Iminoalkyl ferrocenyl derivatives can be used as ligands in asymmetric catalysis and as starting materials for asymmetric Staudinger reaction.     

Investigation of the complexation of essential oil components with cyclodextrins

The formation of inclusion complexes of six essential oil (EO) components (β-caryophyllene, cis-ocimene, trans-ocimene, sabinene hydrate (thujanol), γ-terpinene and α-terpineol) with six cyclodextrins (CDs) (α-CD, β-CD, γ-CD, HP-β-CD, RAMEB and CRYSMEB) was investigated by using static headspace-gas chromatography and UV–visible spectroscopy. Retention studies showed that CDs could efficiently reduce the volatility of EO components except for β-caryophyllene with α-CD. In this case, no inclusion complex was detected while for other compounds the formation of 1:1 inclusion complexes was observed. Results revealed that the inclusion stability mainly depends on geometric complementarity between encapsulated molecule and CD's cavity. Molecular modelling was used to investigate the complementarities between host and guest. Thus, CDs could efficiently be regarded as promising encapsulants for EO components leading to improve their application in cosmetic, pharmaceutical and agriculture fields.