Highly efficient lens couplers for laser-diodes based on long period grating in special graded-index fiber

A theoretical scheme of a new device consisting of a lensed fiber and a long period grating (LPG) imprinted in a special single mode gradient-index fiber (SSMGIF) is presented. The SSMGIF consists of the single mode uniform core and the graded-index cladding. The performance of the proposed device is based on specific properties of SSMGIF. For high efficiency coupling between number of cladding modes and co-propagating core mode in this special type of the fiber we can use a number of weak LPGs with the same amplitudes of the refractive index modulation and with almost the same lengths. This scheme provides higher coupling efficiency, relaxed longitudinal alignment tolerance, and smaller device size, than an identical scheme with the LPG imprinted in a step-index (SI) fiber. Two different types of fiber lenses (hemispherical and hyperbolic) are presented for comparison.     

Visualization of supersonic screeching jets using a phase conditioned focusing schlieren system

This study describes a technique that combines the benefits of focusing schlieren and phase conditioning. Focusing schlieren blurs and drops contrast of non-critical features whereas phase conditioning emphasizes periodic flow features, and their combination produces unique results. The supersonic jets that we studied produced an intense tone referred to as screech. The measured screech tone signal was used as input to the phase conditioning circuit that adjusted the strobing light source to the vertical synchronization pulse of a CCD camera. The sharp video images obtained by this technique could either be frozen or continuously swept through one period of screech to acquire a slow motion video record of the jet unsteadiness. Two cases were visualized in this study: first, an underexpanded jet from a convergent rectangular nozzle at various fully expanded Mach numbers. Second, a supersonic jet emerging from a convergent-divergent rectangular nozzle at a design Mach number of 1.4, artificially excited by impingement tones. The results of this study illustrate the usefulness of this system in visualizing oscillatory flows.The authors would like to thank Dr. Edward J. Rice for his contributions including the design of the impingement obstacles. The efforts of Brentley C. Nowlin (NASA Lewis), and James E. Little (NYMA Inc.) in the design and construction of the strobe trigger mechanism are highly appreciated. We also thank Janet Ivancic (NASA Lewis Photo Lab) for the image enhancement.     

Stable in situ sorting and minimum data movement

In this paper, we describe an algorithm to stably sort an array ofn elements using only a linear number of data movements and constant extra space, albeit in quadratic time. It was not known previously whether such an algorithm existed. When the input contains only a constant number of distinct values, we present a sequence ofin situ stable sorting algorithms makingO(n lg^(k+1) n+kn) comparisons (lg^(K) means lg iteratedk times and lg* the number of times the logarithm must be taken to give a result 0) andO(kn) data movements for any fixed valuek, culminating in one that makesO(n lg*n) comparisons and data movements. Stable versions of quicksort follow from these algorithms.Research supported by Natural Sciences and Engineering Research Council of Canada grant No.A-8237 and the Information Technology Research Centre of Ontario.Supported in part by a Research Initiation Grant from the Virginia Engineering Foundation.     

NMR.-Investigation of the Formaldehyde Addition and Oligomerisation Equilibria in the System Formaldehyde/Water/Acetic Acid/Hydrochloric Acid

An NMR. investigation of the state of formaldehyde in acidic solutions has been carried out. Solutions of DCl/D₂O/CD₃COOD containing two sources of formaldehyde, i.e. paraformaldehyde (I) and trioxane (II), were used for this purpose. In systems I and II the effect of various D₂O/CD₃COOD ratios, at a constant DCl concentration, was studied, while for II the effect of changing DCl concentration was also investigated. The results show that in aqueous solution, formaldehyde exists primarily as the monomeric and linear oligomeric forms of methylene glycol. Reducing the amount of D₂O (at constant DCl concentration), while increasing the CD₃COOD content, results in an increase in the polymeric species and in trioxane. In addition, substitution of water by acetic acid results in systems that are catalytically more active than aqueous solutions of the same hydrochloric acid concentration. Along with the usual polymer-monomer equilibria which exist in such solutions, side reactions of methylene glycol with the hydrochloric acid present also occur to a small extent, e.g. acetylation, substitution of OH by Cl and the Cannizzaro reaction. It is suggested that these findings will result in a better understanding of the formaldehyde crosslinking reactions in cotton cellulose.     

Synthesis of 1-(5-phenyl-2H-tetrazol-2-ylacetyl)-4-substituted thiosemicarbazides as possible antiinflammatory agents

A series of 1-(5-phenyl-2H-tetrazol-2-ylacetyl)-4-substituted thiosemicarbazids were prepared as possible antiinflammatory agents. Their antiproteolytic activity was reported.     

Cobalt(II), nickel(II), copper(II) and zinc(II) complexes of conjugated 3-(benzylidene/salicylidene)-β-diketones (having no enolisable γ-carbon proton) and their reactions

Transition Metal Chemistry - The synthesis and structural characterization of new metal(II) chelates (M = CoII, NiII, CuII and ZnII) of neutral conjugated bidentate β-diketone ligands, having...     

Accurate and efficient method for predicting thermochemistry of polycyclic aromatic hydrocarbons - bond-centered group additivity

A self-consistent estimation method for the thermochemical properties of polycyclic aromatic hydrocarbons (PAH) is presented. This method is based on enthalpies of formation (DeltaHf(degrees), entropies (S(degrees)298, and heat capacities (C(degrees)p obtained from B3LYP/6-31G(d) calculations of the total energies and frequencies for 139 PAHs, including C(60) and C(70) fullerenes. The enthalpies of formation were calculated using an optimized set of homodesmic reactions given the available experimental DeltaHf(degrees) of PAHs. The theoretical entropies were compared with the existing experimental entropies, and some inconsistencies in the experimental data were identified. The estimation method presented here is a systematic extension of the widely employed atom-centered group additivity method originally proposed by Benson. This new method is based on bond-centered groups that define bonds linking two atom-centered groups and specify the size of the rings to which they belong. In addition, a term to describe the resonance energy is included. The thermochemical properties of PAHs up to C(70) fullerene are estimated with a mean average deviation of 2.8 kcal mol(-1) in DeltaHf(degrees), 0.7 cal K(-1) mol(-1) in S(degrees)298, and about 0.5 cal K(-1) mol(-1) in the C(degrees)p. This bond-centered group additivity method for the thermochemical properties of PAHs significantly expands both the range of systems that can be estimated and the accuracy of the estimations. The results of this work also allow us to assess the quality of available experimental data. For example, there are strong indications that the literature DeltaHf(degrees)of benzo[k]fluoranthene is about 10 kcal mol(-1) too low.     

Conformational analysis of some acrylates using dipole moment calculations by CNDO/force method

CNDO MO calculations are carried out for four acrylates, H₂C=C (R₁)-COO (R₂) with R₁=H, Me and R₂=Me, Et for dipole moment determination using the Pople-Segal expression.⁷ Energy minimization for various conformers in each molecular system was achieved by the gradient method. Dipole moments for comparatively stable conformers of each of the molecules considered are reported. Theoretically calculated energy values are used to arrive at the equilibrium geometry and the corresponding dipole moments are compared with the experimental values in each system considered.