Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

Validated Stability-Indicating Method for Alendronate Sodium Employing Zwitterionic Hydrophilic Interaction Chromatography Coupled with Charged Aerosol Detection

Alendronate sodium is widely used in the treatment of osteoporosis and Paget’s disease. The HPLC method development for alendronate sodium, in particular, is challenging owing to the absence of chromophoric group and its high polarity. In the present study, a short and simple isocratic method was developed involving hydrophilic interaction liquid chromatography, coupled with a charged aerosol detector. The developed method was validated according to the ICH Q2(R1) guideline and was successfully applied for the analysis of a marketed formulation containing the drug.

     

To-and-fro motion of W5Si3 on a beta-Si3N4 substrate at elevated temperatures.

Behavior of fine crystalline particles of W5Si3 on a beta-Si3N4 substrate at high temperatures was observed by an in situ heating experiment in a transmission electron microscope. Some of the fine particles of W5Si3 moved in a to-and-fro manner.     

Fatty acid binding site of mitochondrial uncoupling protein UCP2 as probed by EPR spectroscopy of spin-labeled fatty acids

Electron paramagnetic resonance (EPR) spectroscopy of spin-labeled fatty acids was used to investigate their interaction withEscherichia coli-expressed human mitochondrial uncoupling protein UCP2 refolded from inclusion bodies in nonaethylene glycol monododecyl ether (C₁₂E₉) micelles. 5-DOXYL-stearic acid and 4-PROXYL-palmitic acid bound to UCP2 exhibited additional clearly separated h_+1I, h_?1I “immobile” peaks in the low- and high-field region, respectively, separated by 42 and 44 Gauss, and extensively reduced h_+1M, h_?1M “mobile” peaks, separated by about 30 G, whereas with 7-DOXYL-stearic acid the I and M peaks were smoothed together into one wide peak. Competition of 4-PROXYL-palmitic acid with added palmitic acid, arachidonic acid, and all-cis-8,11,14-eicosatrienoic acid and of 7-DOXYL-stearic acid with arachidonic acid was indicated by the disappearance of the h_+1I, h_?1I “immobile” peaks, whereas redistribution in micelles without protein was indicated by the rising of the h_+1M, h_?1M “mobile” peaks. In conclusion, a competition of palmitic, arachidonic, and eicosatrienoic acid within a putative fatty acid binding site was observed for mitochondrial uncoupling protein UCP2. This finding together with the observation of EPR spectra of highly immobilized probes exclusively in the presence of the recombinant UCP2 suggest the existence of a fatty acid binding site on UCP2 which is a prerequisite of the fatty acid cycling mechanism as previously postulated for UCP1.     

EPR and optical absorption studies on VO ions in KZnClSO4·3H2O single crystals—an observation of superhyperfine structure

EPR spectra of VO²⁺ ions doped in KZnClSO₄·3H₂O single crystals have been studied at different temperatures. The EPR spectrum shows a well-resolved hyperfine and superhyperfine structure patterns. The angular variation of EPR spectra reveals the presence of more than three magnetic complexes, which correspond to distinct sites of VO²⁺ ion. From the angular variation EPR data, the spin-Hamiltonian parameters are evaluated and discussed. The optical absorption spectrum studied at room temperature shows bands corresponding to C_4v symmetry. From the EPR and optical data, the molecular-orbital bonding coefficient ε² and β² are evaluated and discussed. The observed five-line superhyperfine structure has been attributed to four protons (with I=1/2) from the surrounding water molecules of one of the vanadyl sites.     

Syntheses and characterization of 16‐arm star and star diblock copolymer and AB8 9‐miktoarm star copolymer via NMRP and ROP from dendritic multifunctional macroinitiators

A dendritic macroinitiator having 16 TEMPO‐based alkoxyamines, Star‐16 , was prepared by the reaction of a dendritic macroinitiator having eight TEMPO‐based alkoxyamines, [G‐3]‐OH , with 4,4′‐bis(chlorocarbonyl)biphenyl. The nitroxide‐mediated radical polymerization (NMRP) of styrene (St) from Star‐16 gave 16‐arm star polymers with PDI of 1.19–1.47, and NMPR of 4‐vinylpyridine from the 16‐arm star polymer gave 16‐arm star diblock copolymers with PDI of 1.30–1.43. The ring‐opening polymerization of ε‐caprolactone from [G‐3]‐OH and the subsequent NMRP of St gave AB₈ 9‐miktoarm star copolymers with PDI of 1.30–1.38. The benzyl ether linkages of the 16‐arm star polymers and the AB₈ 9‐miktoarm star copolymers were cleaved by treating with Me₃SiI, and the resultant poly(St) arms were investigated by size exclusion chromatography (SEC). The SEC results showed PDIs of 1.23–1.28 and 1.18–1.22 for the star polymers and miktoarm stars copolymers, respectively, showing that they have well‐controlled poly(St) arms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1159–1169, 2007.     

Development of a Millimeter Wave Compact Equipment for NDT of Materials

We developed a compact equipment working at 94 GHz to replace the commonly used network analyzer for nondestructive testing of materials. The compact equipment was designed to measure the variations in the amplitude and phase of the reflected signal from the material relative to a reference signal. A good accuracy of the amplitude and phase measurement of the equipment was obtained in the confirmative experiments. The distribution of a drop of water in a wood plate is clearly visible in the millimeter wave images obtained by the amplitude and phase measurement.     

Magnetic properties of lanthanum orthoferrite fine powders prepared by different chemical routes

Fine powders of lanthanum iron oxide, LaFeO₃, have been prepared by solid state reaction as well as sol-gel synthesis and nebulized spray pyrolysis. Structures, morphologies and magnetic susceptibility measurements of these powders have been examined. The powders prepared by all the three low-temperature routes contain nearly spherical particles with an average diameter of 40 nm. These samples show a lower Neel temperature than the powder prepared by solid state reaction besides showing much lower magnetic susceptibility at low temperatures. Dedicated to Professor C N R Rao on his 70th birthday     

Study of fiber optic sugar sensor

Over the last two decades, the fiber optic technology has passed through many analytical stages. Some commercially available fiber optic sensors, though in a small way, are being used for automation in mechanical and industrial environments. They are also used for instrumentation and controls. In the present work, an intensity-modulated intrinsic fiber optic sugar sensor is presented. This type of sensor, with slight modification, can be used for on-line determination of the concentration of sugar content in sugarcane juice in sugar industry. In the present set-up, a plastic fiber made of polymethylmethacrylate is used. A portion of the cladding (1 cm, 2 cm, 3 cm) at the mid-point along the length of the fiber is removed. This portion is immersed in sugar solution of known concentration and refractive index. At one end of the fiber an 850 nm source is used and at the other end a power meter is connected. By varying the concentration of sugar solution, the output power is noted. These studies are made due to the change in refractive index of the fluid. The device was found to be very sensitive which is free from EMI and shock hazards, stable and repeatable and they can be remotely interfaced with a computer to give on-line measurements and thus become useful for application in sugar industries.     

Valence band and chemical interactions of Zn/CdSnAs2 interfaces

X-ray photoelectron spectroscopy (XPS) together with argon ion sputtering was used to investigate the interface of the Zn/CdSnAs₂ system at various temperatures. The formation of an intermediate compound between Zn and As is proposed. The surface enrichment of Cd and Sn at 200 and 400°C is explained in terms of bond breaking and lattice strain theories.NCL Communication No. 4352