Electrochemical oxidation of ethyl 3-oxo-3-phenyl-2-phenylhydrazonopropionate

The electrochemical oxidation of ethyl 3-oxo-3-phenyl-2-phenylhydrazonopropionate has been studied in the pH range 3.0–11.0 at a pyrolytic graphite electrode by linear and cyclic sweep voltammetry, coulometry and spectral studies. The results indicate that the 2 e⁻, 2 H⁺ oxidation of this compound gives phenol and ethyl 3-phenyl-2,3-dioxopropionate as the major products of electrooxidation.     

LC–MS Determination of Gabapentin from Human Plasma

Gabapentin is an anticonvulsant drug used for the treatment of epilepsy. It is not bound to plasma protein and is not metabolized. A high performance liquid chromatography–mass spectrometric micro method is described in this report for its determination from human plasma. Chromatography was performed on a 50 × 4.6 mm, 4 μm nitrile column and the parent ion detected in the positive ionization mode on single quadrupole analyzer (Q1MI) with atmospheric pressure ionization source. Extraction was carried out on C₁₈, 100 mg/3cc cartridge using 10 μL sample volume. The mean extraction recovery was 97% and within batch and between batch coefficients of variation were <9%. Lack of interference from endogenous substances helped in achieving a highly sensitive method without the need for monitoring fragment ions. The lowest concentration injected on column for calibration curve was 195 pg (range 0.5–64 ng). The method was applied for analysis of samples from a cross-over bio-equivalence study comparing two formulations.     

Applying green analytical chemistry for development and validation of RP-HPLC stability indicating assay method for estimation of fenoverine in bulk and dosage form using quality by design approach

A green and robust reverse-phase liquid chromatographic method has been developed for the determination of fenoverine (FEN), by applying combined principles of green analytical chemistry and quality by design approaches on a Spherisorb C18 column (150?×?4.6?mm, 3?µm) with UV detection at 262?nm. A two level fractional factorial design (2^^7-3) Res IV was used for screening of influential chromatographic factors. The critical method parameters actively affecting critical quality attributes (CQAs) were identified and further optimized using Box–Behnken design. The predicted optimum assay conditions comprised of methanol and ammonium acetate buffer 20?mM, in an extent of 81:19% v/v individually having a flow rate of 1.0?mL/min with a column oven temperature of 33°C. The drug was stressed in hydrolytic, oxidative, reductive, thermal, and photolytic conditions. The developed method was validated successfully. The detector response was linear in the concentration of 0.5–160?µg/mL with a limit of detection (LOD) and limit of quantitation (LOQ) as 0.1 and 0.3?µg/mL, respectively. The % recovery was found to be 99.7%. The analytical method volume intensity value for developed method was 45?mL and the environment assessment tool (EAT) score was 41.07. The method is simple, environmentally benign, rapid, and robust for the determination of FEN in bulk and in its dosage form.     

Water Soluble Nickel – metformin ternary complexes: Thermal,DNA binding and molecular docking studies

The Nickel (II) complexes [Ni(Cl)₂(metf)(o-phen)] (1), [Ni(Cl)₂(metf)(opda)] (2) , [Ni(Cl)₂(metf)(en)] (3) , [Ni(Cl)₂(metf)(2,2'-bipy)] (4) , (metf = metformin, o-phen = ortho-phenanthroline, opda = ortho-phenylenediamine, en = ethylenediamine, 2–2′ bipy = 2–2′ bipyridyl) were synthesized and characterized using LC–MS, elemental analysis, molar conductance measurements, TGA-DTA, IR spectroscopy, magnetic moment measurements and electronic spectroscopy. The central Ni²⁺ was found to be in octahedral geometry. The DNA interaction of these complexes have been studied by UV–visible absorption studies, fluorescence emission technique and viscosity measurement. The complexes showed absorption hyperchromism in UV–visible spectra with calf thymus DNA. The binding constants from UV–visible absorption studies were 7.42 × 10⁴, 0.74 × 10⁴, 3.19 × 10⁴, 5.9 × 10⁴ M⁻¹ for 1 , 2 , 3 and 4 , respectively and Stern-Volmer quenching constants from fluorescence studies were 0.16, 0.41, 0.23, 0.18, respectively. Viscosity measurements revealed that the binding of the complexes with DNA could be surface binding, mainly due to groove binding. The highest DNA cleavage activity of the complexes is recorded for complex 1 . The complexes were docked in to B-DNA sequence, 5′(D*AP*CP*CP*GP*AP*CP* GP*TP*CP*GP*GP*T)-3′ retrieved from protein data bank (PDB ID: 423D), using Discovery Studio 2.1 software. C Docker Intectraction energy of 1 , 2 , 3 and 4 complexes is 32.027, 31.427, 35.393 and 30.521 respectively. The highest docking score is seen for complex 3 .     

Bio-inspired sustainable synthesis of silver chloride nanoparticles and their prominent applications

Advanced nanotechnology is an enormously growing area due to its massive scope of applications for diverse domains of applied science and engineering. Numerous types of synthetic procedures are utilized for the creation of nanoparticles (NPs) due to their myriad application scenarios. However, known conventional physical and chemical strategies have a number of shortcomings. Consequently, the designs of facile, clean, safer, non-noxious, reliable, inexpensive and eco-friendly processes for manufacturing of NPs are being explored actively to circumvent these barriers. The phytogenic fabrication of NPs is much safer, one-pot, facile, and a sustainable methodology. Hence, divergent biological means like the use of plants, biopolymers, fungi, fibres, bacteria, enzymes, etc., are pursued the procurable biogenic fabrication of metallic NPs. In this review paper, current findings on the bio-inspired fabrication of silver chloride nanoparticles (AgCl-NPs) are deliberated, which have with their useful appliances in assorted sectors. The experimental protocols, advanced characterization techniques along with diverse applications of biogenically synthesized AgCl-NPs have been highlighted.     

Natural radioactivity studies of Bidar soil samples using gamma spectrometry

The activity of the terrestrial primordial radionuclides ²²⁶Ra, ²³²Th and ⁴⁰K are measured for Bidar soil samples. The collected soil samples are analyzed using HPGe detector based on high resolution gamma spectrometric system. The activity of the three radionuclides ²²⁶Ra, ²³²Th and ⁴⁰K were found to be in the range of BDL–47.68, 7.65–59.08 and BDL–260.65 Bq kg^?1 respectively. The mean gamma absorbed dose rate in air above 1 m from ground is estimated to be 34.47 nGy h^?1. Annual effective dose equivalent and the radium equivalent activity were within the limits in the present study and it is found that the activity of the radionuclides are comparable with the worldwide literature values. Also the external hazard indices for the soil samples of Bidar district were within the limit of unity.     

Structural and thermal properties of HDPE/n-AlN polymer nanocomposites

High-density polyethylene (HDPE) containing various volume fractions (0–20 vol%) of aluminum nitride nanoparticles (n-AlN) is prepared by melt mixing. Structural and morphological characterizations of the prepared composites are carried out by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and atomic force microscopy (AFM). Thermal stability and degradation kinetics of HDPE/AlN (nano) composites are investigated by Thermogravimetric analysis (TG). HR-TEM micrographs confirm fairly uniform dispersion of AlN nanoparticles, as well as the existence of long interconnected chain-like aggregates. AFM images also confirm homogeneous dispersion of n-AlN in the polymer matrix. Roughness analysis from the AFM data indicates the presence of substantial undulation from the mean surface level. Thermogravimetric data indicate small improvement in the thermal stability of the composites. Kinetic parameters, viz., the activation energy (E _a), frequency factor (A), and reaction order (n) are estimated using the isoconversional methods of Kissinger, Flynn–Wall–Ozawa (FWO), KAS, and Friedman. Activation energies (E _a) calculated by the above four models display nearly similar features and are enhanced by the presence of AlN nanoparticles. Kinetics of degradation of HDPE-AlN (nano) composites follows a first-order reaction.     

Simultaneous Quantification of Aliskiren, Valsartan and Sitagliptin by LC with Fluorescence Detection: Evidence of Pharmacokinetic Interaction in Rats

A sensitive, precise and simple LC method for the simultaneous quantification of aliskiren, valsartan and sitagliptin in rat plasma has been developed and validated. The chromatographic separation was achieved on a C₁₈ column (250 mm × 4.6 mm, 5 μm) maintained at room temperature, using isocratic elution with acetonitrile/20 mM ammonium acetate buffer (35:65, v/v), pH adjusted to 4.85 with glacial acetic acid, and detected using a fluorescence detector. Liquid–liquid extraction of the aliskiren, valsartan and sitagliptin from the rat plasma with t-butyl methyl ether resulted in their high recoveries. LC calibration curves based on the extracts from the rat plasma were linear in the range of 25–2,000 ng mL^?1 for aliskiren and sitagliptin and 50–4,000 ng mL^?1 for valsartan. The limits of quantification were 25 ng mL^?1 for aliskiren and sitagliptin and 50 ng mL^?1 for valsartan. The precision and accuracy of the method were well within the generally accepted criteria for biomedical analysis. The described method was successfully applied to study the pharmacokinetics of aliskiren, valsartan and sitagliptin following oral administration, individually as well as in combination in Sprague–Dawley rats. The results of the study implied the occurrence of pharmacokinetic interaction upon the co-administration of these three drugs.     

Kinetics and mechanism of uncatalysed and ruthenium(III)-catalysed oxidation of <Emphasis Type="SmallCaps">d</Emphasis>-panthenol by alkaline permanganate

The oxidation of d-panthenol by MnO₄ ⁻ was studied in the absence and in the presence of ruthenium(III) catalyst in alkaline medium at 298 K and at constant ionic strength of 0.50 mol dm⁻³ by spectrophotometry. The stoichiometry in both the cases was [panthenol]: [MnO₄ ⁻] = 1:4. The oxidation products were identified by IR and GC–MS. The reaction was first-order with respect to both MnO₄ ⁻ and ruthenium(III), while the orders with respect to both panthenol and alkali varied from first order to zero order as the concentrations increased. The effects of added products, ionic strength and dielectric constant were studied. The reaction constants, activation parameters and thermodynamic quantities were calculated for both the uncatalysed and catalysed reactions.