Brominated poly(isobutylene‐co‐para‐methylstyrene) (BIMS)‐clay nanocomposites: Synthesis and characterization

In this work, preparation and properties of different nanoclays modified by organic amines (octadecyl amine, a primary amine, and hexadecyltrimethylammonium bromide, a tertiary amine) and brominated polyisobutylene‐co‐paramethylstyrene (BIMS)‐clay nanocomposites are reported. The clays and the rubber nanocomposites have been characterized with the help of Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X‐ray diffraction (XRD). The X‐ray diffraction peaks observed in the range of 3 °–10 ° for the modified clays disappear in the rubber nanocomposites. TEM photographs show predominantly exfoliation of the clays in the range of 12 ± 4 nm in the BIMS. In the FTIR spectra of the nanocomposites, there are common peaks of virgin rubber as well as those of the clays. Excellent improvement in mechanical properties like tensile strength, elongation at break, and modulus is observed on incorporation of the nanoclays in the BIMS. Structure‐property correlation in the above nanocomposites is attempted. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4489–4502, 2004     

The Statistical Mechanics of Semiflexible Equilibrium Polymers

We give an overview of studies of models for semiflexible, equilibrium polymers with special emphasis on our work on both lattice and continuum models for such systems. We show, principally by Monte Carlo simulations, that, once monomers self assemble to form polymers, their semiflexibility leads to nematic phases at low temperatures. Attractive wall potentials encourage the adsorption of these equilibrium polymers on surfaces. Rapid cooling leads to the formation of glasses with entangled polymers. Shear promotes nematic ordering, but, at high shear rates, this tendency decreases since the equilibrium polymers are torn apart. A version of our model in which the polymers are directed shows the polymer analog of bosonic Mott-insulating, mass-density-wave, and supersolid phases. We give a brief comparison of our work with other studies and also explore the experimental implications of our study.     

Quark mass corrections to the perturbative thrust and its effect on the determination of αs

We consider the effects of quark masses to the perturbative thrust in e ⁺ e ⁻ annihilation. In particular we show that perturbative power corrections resulting from non-zero quark masses considerably alters the size of the non-perturbative power corrections and consequently, significantly changes the fitted value of α_s.     

On solving energy-dependent partitioned eigenvalue problem by genetic algorithm: The case of real symmetric Hamiltonian matrices

An energy-dependent partitioning scheme is explored for extracting a small number of eigenvalues of a real symmetric matrix with the help of genetic algorithm. The proposed method is tested with matrices of different sizes (30 × 30 to 1000 × 1000). Comparison is made with Löwdin’s strategy for solving the problem. The relative advantages and disadvantages of the GA-based method are analyzed     

Working group report: Neutrino and astroparticle physics

This is the report of neutrino and astroparticle physics working group at WHEPP-7. Discussions and work on CP violation in long baseline neutrino experiments, ultra high energy neutrinos, supernova neutrinos and water Cerenkov detectors are discussed.     

Studies on crosslinking of EPDM-PE blends by thermoanalytical techniques

The effect of blend ratio and peroxide concentration on crosslinking characteristics of EPDM-PE blends were studied by Differential Scanning Calorimetry, Brabender plasticorder and Rheometer. Crosslinking of EPDM-PE blends follows first order reaction kinetics. The curing exotherm increases but activation energy decreases with increase in EPDM content in the blends. The same however increases with the increase in concentration of DCP upto a certain level, while the activation energy is almost independent of peroxide concentration. The cure rate increases whereas optimum cure time and energy consumption for curing decrease with increase in the EPDM-PE ratio. A method for determination of crosslinking efficiency in the case of blend systems was developed from high temperature modulus to predict the properties and the curing behaviour of the blends.

---

Zusammenfassung Mittels DSC, Brabender Plasticorder und Rheometer wurde der Einfluß von Mischungsverhältnis und Peroxidkonzentration auf den Vernetzungsverlauf von EPDM-PE-Gemischen untersucht. Die Vernetzung von EPDM-PE-Gemischen verläuft nach einer Reaktion erster Ordnung. Je höher der Anteil von EPDM im Gemisch, um so exothermer ist die Vernetzung und um so kleiner ist die dazugehörige Aktivierungsenergie. Mit dem Anwachsen der DCP-Konzentration bis zu einem gewissen Niveau wächst der exotherme Charakter, während die Aktivierungsenergie fast unabhängig von der Peroxidkonzentration ist. Mit dem Anstieg des EPDM/PE-Verhältnisses wächst die vernetzungsgeschwindigkeit, während die optimale Vernetzungszeit und der Energieverbrauch für die Vernetzung sinken. Es wurde ein Verfahren zur Bestimmung der Vernetzungseffizienz bei Mischsystemen entwickelt, um Eigenschaften und Vernetzungsverhalten von Gemischen voraussagen zu können.

     

Silver (I)-promoted asymmetric halohydrin reaction of chiral N-enoyl-2-oxazolidinones: scope and limitations

The halohydrin reaction of chiral N-enoyl-2-oxazolidinones 1 by halogen (Br₂/I₂) and water were efficiently carried out in aqueous organic solvent promoted by silver(I) with high anti- and regioselectivity and moderate to good diastereoselectivities. The alkenoyl, cinnamoyl and electron-deficient cinnamoyl substrates smoothly underwent bromohydrin reaction in aqueous acetone but no iodohydrin reaction, where as electron-rich cinnamoyl substrates preferred to undergo iodohydrin reaction in aqueous acetone with moderate diastereoselectivity and enhanced diastereoselectivity was observed in aqueous THF.     

Thermal degradation of polystyrene in the presence of hydrogen by catalyst in solution

For the first time, low temperature degradation (170-240 °C) of polystyrene in benzene is carried out in the presence of hydrogen using iron(III) oxide catalyst. The effect of temperature, catalyst loading and polymer loading on degradation are studied in hydrogen atmosphere. Degradation is also carried out at different initial hydrogen partial pressure. The time dependent molecular weight is calculated using viscosity average method. It is found that the degradation is enhanced considerably in the presence of hydrogen and followed random degradation chain scission. A random degradation kinetic model of Kelen [Kelen T. Polymer degradation. New York: Van Nostrand Reinhold Company; 1983.] is used to estimate the degradation rate constants. Empirical correlations are proposed to account for the effect of catalyst loading and initial hydrogen partial pressure on degradation. The true thermal degradation rate constants are calculated using these proposed correlations at given catalyst loading and initial hydrogen partial pressure with varying temperature. The frequency factor and activation energy are also determined using Arrhenius equation considering the true thermal degradation rate constants.     

Oxidation of heme to beta- and delta-biliverdin by Pseudomonas aeruginosa heme oxygenase as a consequence of an unusual seating of the heme

The origin of the unusual regioselectivity of heme oxygenation, i.e. the oxidation of heme to delta-biliverdin (70%) and beta-biliverdin (30%), that is exhibited by heme oxygenase from Pseudomonas aeruginosa (pa-HO) has been studied by (1)H NMR, (13)C NMR, and resonance Raman spectroscopies. Whereas resonance Raman indicates that the heme-iron ligation in pa-HO is homologous to that observed in previously studied alpha-hydroxylating heme oxygenases, the NMR spectroscopic studies suggest that the heme in this enzyme is seated in a manner that is distinct from that observed for all other alpha-hydroxylating heme oxygenase enzymes for which a structure is known. In pa-HO, the heme is rotated in-plane approximately 110 degrees, so the delta-meso-carbon of the major orientational isomer is located within the HO-fold in the place where the alpha-hydroxylating enzymes typically place the alpha-meso-carbon. The unusual heme seating displayed by pa-HO places the heme propionates so that these groups point in the direction of the solvent-exposed heme edge and appears to originate in large part from the absence of stabilizing interactions between the polypeptide and the heme propionates, which are typically found in alpha-hydroxylating heme oxygenase enzymes. These interactions typically involve Lys-16 and Tyr-112, in Neisseriae meningitidis HO, and Lys-16 and Tyr-134, in human and rat HO-1. The corresponding residues in pa-HO are Asn-19 and Phe-117, respectively. In agreement with this hypothesis, we found that the Asn-19 Lys/Phe-117 Tyr double mutant of pa-HO exists as a mixture of molecules exhibiting two distinct heme seatings; one seating is identical to that exhibited by wild-type pa-HO, whereas the alternative seating is very similar to that typical of alpha-hydroxylating heme oxygenase enzymes and is related to the wild-type seating by approximately 110 degrees in-plane rotation of the heme. Furthermore, each of these heme seatings in the pa-HO double mutant gives rise to a subset of two heme isomeric orientations that are related to each other by 180 degrees rotation about the alpha-gamma-meso-axis. The coexistence of these molecules in solution, in the proportions suggested by the corresponding area under the peaks in the (1)H NMR spectrum, explains the unusual regioselectivity of heme oxygenation observed with the double mutant, which we found produces alpha- (55%), delta- (35%), and beta-biliverdin (10%). Alpha-biliverdin is obtained by oxidation of the heme seated similar to that of alpha-hydroxylating enzymes, whereas beta- and delta-biliverdin are formed from the oxidation of heme seated as in wild-type pa-HO.     

High throughput drug screening by direct RNA profiling on DNA sensors

The feasibility of DNA microarray sensor technology as a routine technique of molecular pharmacology to perform high throughput drug screening and the advantages of directly labeled RNA for a high throughput experiment are presented in this paper. A novel, single-step direct chemical labeling method for DNA microarray target samples has been developed to reduce the sample amount, cost, time and error of the experiment by eliminating the need for enzyme mediated labeling. Reproducibility of the data for high throughput drug screening is demonstrated by monitoring differential gene expression of a set of 45 gene targets involved in the genotoxic stress response pathways.