Optoelectronic properties of SnO_2 thin films sprayed at different deposition times

This article presents the elaboration of tin oxide(SnO_2) thin films on glass substrates by using a home-made spray pyrolysis system. Effects of film thickness on the structural, optical, and electrical film properties are investigated. The films are characterized by several techniques such as x-ray diffraction(XRD), atomic force microscopy(AFM), ultravioletvisible(UV–Vis) transmission, and four-probe point measurements, and the results suggest that the prepared films are uniform and well adherent to the substrates. X-ray diffraction(XRD) patterns show that SnO_2 film is of polycrystal with cassiterite tetragonal crystal structure and a preferential orientation along the(110) plane. The calculated grain sizes are in a range from 32.93 nm to 56.88 nm. Optical transmittance spectra of the films show that their high transparency average transmittances are greater than 65% in the visible region. The optical gaps of SnO_2 thin films are found to be in a range of 3.64 e V–3.94 e V. Figures of merit for SnO_2 thin films reveal that their maximum value is about 1.15 × 10-4-1?atλ = 550 nm. Moreover, the measured electrical resistivity at room temperature is on the order of 10-2?·cm.     

Diffusion phenomena of a cold gas in a thermal plasma stream

The present study involves both experimental investigation and mathematical modeling of the diffusion process of a cold gas injected into a main plasma stream. The cold gas (nitrogen or helium) was injected axially through a water cooled tube located along the centerline of an induction plasma torch. The 2-D distribution of the temperature, velocity and concentration profiles in the plasma flow were measured using enthalpy probe techniques. The results are compared with the predictions of a 2-D, LTE, turbulent mathematical model. The effects of the nature (composition) of the injected gas and its mass flow rate are investigated. The enthalpy probe measurements and the predictions of the model are in good agreement. The effective (turbulent and molecular) transport properties are estimated from a comparison of the measured and calculated profiles of the temperature, velocity and concentration fields. This study sheds light on the basic diffusion mechanisms involved in a widely used configuration of induction plasma reactors, i.e. in which the material to be treated is injected axially into the plasma, through a central water cooled tube.