Optimization of in-vacuo template-stripped Pt surfaces via UHV STM

A recently demonstrated [1] in-vacuo template-stripping process is applied to the study of platinum films stripped from ultra-flat silicon-oxide surfaces. Template-stripped (TS) Pt surfaces, prepared with a range of post-deposition annealing times prior to being stripped from the templating surface in an ultra-high vacuum (UHV) environment, are examined by UHV scanning tunneling microscopy (STM). These studies reveal that without post-deposition annealing, TS Pt surfaces are largely made up of poorly-ordered, granular nanostructures undesirable for many applications. The post-deposition annealing treatments explored in the study result in the emergence and continuous growth of large smooth crystallites. Issues with crystallite orientation relative to the TS surface and artefacts arising as a result of the epoxy used in the template-stripping process are presented and discussed in relation to optimizing the template-stripping procedure for specific applications such as self-assembled monolayer (SAM) formation for molecular electronics. PACS 68.37.Ef; 68.47.De; 68.55.Jk; 81.05.Bx; 81.15.Ef     

Ξ Resonances in Ξ− Be interactions II. Properties of Ξ(1820) and Ξ(1960) in the\Lambda \bar K^0 and\Sigma ^0 \bar K^0 channels

In an experiment at the CERN-SPS charged hyperon beam, we have investigated the inclusive \(\Lambda \bar K^0 \) and \(\Sigma ^0 \bar K^0 \) final states formed in Ξ^? Be interactions. In the \(\Lambda \bar K^0 \) channel, we observe a signal at 1826 MeV/c² which can be identified with the known Ξ(1820) resonance. We determine its mass and width to be:M=1826±4 MeV/c², Г=12±14 MeV/c². A moment analysis is consistent with a spin of 3/2 and indicates a negative parity for this spin assignment. Also in the \(\Lambda \bar K^0 \) channel, we observe a 3.6σ signal with the following parameters:M=1963±5 MeV/c², Г=25±15 MeV/c². This state, which we call Ξ(1960), is not observed in the \(\Sigma ^0 \bar K^0 \) channel, leading to an upper limit on the ratio of partial widths \(\Sigma \bar K/\Lambda \bar K\) of 2.3 (90% confidence level). A moment analysis of the \(\Lambda \bar K^0 \) final state indicates a spin of 5/2 or greater in the natural spin-parity series 5/2⁺, 7/2^?, etc.     

Cholesteric liquid crystal displays as optical sensors of barbiturate binding

The influence on the optical properties of cholesteric liquid crystal displays (LCDs) was examined for neutral molecule binding by mesogen/receptors in the mesomorphic phase. The motivation was to prepare neutral molecule sensors that use a colour change to signal analyte binding. A receptor that binds barbiturate analytes was modified with two or one cholesteryl groups to yield compounds 2 and 3, respectively. LCDs were prepared by incorporating one of the receptor/mesogen compounds into a cholesteric LC blend along with a potential H‐bonding guest. The optical properties of the LCDs were then determined by measuring the absorbance of the displays. For various LCDs, the colour of the display depended upon several factors: the amount of guest molecule used, the number of cholesteryl side chains on the receptor and the mole concentration of receptor/mesogen in the blend. In particular, complementary host/guest binding of H‐bonding analytes by the bis(cholesteryl) receptor 2 in a cholesteric LCD caused a change of up to +70 nm, which was observed by the naked eye as a blue‐to‐orange colour change. Control experiments confirm that the colour of an LCD is a consequence of molecular recognition in the mesomorphic phase.     

Phosphine-mediated [4 + 2] annulation of bis(enones): a Lewis base catalyzed "mock Diels-Alder" reaction

Lewis-base-catalyzed cycloisomerization of bis(enones) to decalins has been demonstrated as an alternative to the traditional Lewis acid catalyzed Diels-Alder cycloaddition. In this process, a trialkylphosphine mediates both bond formation steps in two distinct catalytic cycles. The single-pot operation generates two carbon-carbon bonds and up to five contiguous stereocenters in one step, starting from achiral, aliphatic substrates; eight examples are provided. [reaction: see text]     

First observation ofΩ * resonances

In a experiment at the CERN SPS charged hyperon beam using incident Ξ^?, we have obtained evidence for the production of two Ω^* resonances decaying into Ξ^?π⁺ K ^?, with the following parameters:M ₁=2251±12,Γ ₁=48±20 MeV/c², 78 ±23 events, andM ₂=2284±12,Γ ₂=26±23 MeV/c² 45±10 events. The first state is also observed as a 4.2σ effect in a subsample which contains an additionalK ⁺ orK ⁰ in the final state. Production cross sections and branching ratios to Ξ^* K ^? and Ξ^? K ^* are presented.     

A facile approach for assembling lipid bilayer membranes on template-stripped gold

Lipid vesicles are designed with functional chemical groups to promote vesicle fusion on template-stripped gold (TS Au) surfaces that does not spontaneously occur on unfunctionalized Au surfaces. Three types of vesicles were exposed to TS Au surfaces: (1) vesicles composed of only 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipids; (2) vesicles composed of lipid mixtures of 2.5 mol % of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-poly(ethylene glycol)-2000-N-[3-(2-pyridyldithio)propionate] (DSPE-PEG-PDP) and 97.5 mol % of POPC; and (3) vesicles composed of 2.5 mol % of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(poly(ethylene glycol))-2000] (DSPE-PEG) and 97.5 mol % POPC. Atomic force microscopy (AFM) topography and force spectroscopy measurements acquired in a fluid environment confirmed tethered lipid bilayer membrane (tLBM) formation only for vesicles composed of 2.5 mol % DSPE-PEG-PDP/97.5 mol % POPC, thus indicating that the sulfur-containing PDP group is necessary to achieve tLBM formation on TS Au via Au-thiolate bonds. Analysis of force-distance curves for 2.5 mol % DSPE-PEG-PDP/97.5 mol % POPC tLBMs on TS Au yielded a breakthrough distance of 4.8 ± 0.4 nm, which is about 1.7 nm thicker than that of POPC lipid bilayer membrane formed on mica. Thus, the PEG group serves as a spacer layer between the tLBM and the TS Au surface. Fluorescence microscopy results indicate that these tLBMs also have greater mechanical stability than solid-supported lipid bilayer membranes made from the same vesicles on mica. The described process for assembling stable tLBMs on Au surfaces is compatible with microdispensing used in array fabrication.     

Method for the direct determination of available carbohydrates in low-carbohydrate products using high-performance anion exchange chromatography

An improved method for direct determination of available carbohydrates in low-level products has been developed and validated for a low-carbohydrate soy infant formula. The method involves modification of an existing direct determination method to improve specificity, accuracy, detection levels, and run times through a more extensive enzymatic digestion to capture all available (or potentially available) carbohydrates. The digestion hydrolyzes all common sugars, starch, and starch derivatives down to their monosaccharide components, glucose, fructose, and galactose, which are then quantitated by high-performance anion-exchange chromatography with photodiode array detection. Method validation consisted of specificity testing and 10 days of analyzing various spike levels of mixed sugars, maltodextrin, and corn starch. The overall RSD was 4.0% across all sample types, which contained within-day and day-to-day components of 3.6 and 3.4%, respectively. Overall average recovery was 99.4% (n = 10). Average recovery for individual spiked samples ranged from 94.1 to 106% (n = 10). It is expected that the method could be applied to a variety of low-carbohydrate foods and beverages.     

A new ring transformation of 3-halo-2-azidopyridine 1-oxides. A novel synthesis of 1,2-oxazin-6-ones

The course of the thermal ring-opening and recyclization of 2-azidopyridine 1-oxides is radically altered by the presence of a 3-halo substituent. Provided the 6-position is blocked, recyclization leads to a 6-cyano-6-halo-1,2-oxazine which hydrolyzes very readily to the 6H-1,2-oxazin-6-one. The structure of 4-bromo-3-methyl-6H-1,2-oxazin-6-one so obtained was confirmed by single crystal X-ray analysis. If the 6-position is not blocked, the product undergoes a further ring opening to give (Z)-β-cyanoacrylates.