Production and thermal decomposition of polycondensates containing N,N′-disubstituted thiourea derivatives

Polycondensates containing N,N-ethylenethiourea or N,N-diisopropylthiourea units and titanium or silicon-derived coupling agent molecules were prepared. Their structures were confirmed through FTIR spectroscopy. The thermal decomposition of these polycondensates was studied by means of TG and DTA methods and FTIR and ESR spectroscopy.

---

Zusammenfassung Es wurden Polykondensate mit einem Gehalt an N,N-Ethylenthiokarbamidoder N,N-Diisopropylthiokarbamideinheiten und mit Titan oder Silizium abgeleiteten Koppelreagenzmolekülen hergestellt. Ihre Struktur wurde mittels FTIR Spektroskopie bestätigt. Die thermische Zersetzung dieser Polykondensate wurde mittels TG und DTA Verfahren sowie mit Hilfe von FTIR und ESR Spektroskopie untersucht.

---

---

The author thanks Professor P. I. Premovic for valuable discussions. This reseach was supported by the Research Fund of Macedonia, contract 10/1.     

Characterization of natural cellulosic fibers from Yucca aloifolia L. leaf as potential reinforcement of polymer composites

Cellulose - In this work lignocellulosic fibers were obtained from Yucca aloifolia L. leaves and their chemical, morphological, thermal and mechanical properties were studied. The fibers were...     

Colloidal gallium indium oxide nanocrystals: a multifunctional light-emitting phosphor broadly tunable by alloy composition

We demonstrate compositionally tunable photoluminescence in complex transparent conducting oxide nanocrystals. Alloyed gallium indium oxide (GIO) nanocrystals with variable crystal structures are prepared by a colloidal method throughout the full composition range and studied by different structural and spectroscopic methods, including photoluminescence and X-ray absorption. The structures and sizes of the GIO nanocrystals can be simultaneously controlled, owing to the difference in the growth kinetics of In(2)O(3) and Ga(2)O(3) nanocrystals and the polymorphic nature of both materials. Using the synthesized nanocrystal series, we demonstrate the structural and compositional dependences of the photoluminescence of GIO nanocrystals. These dependences, induced by the interactions between specific defect sites acting as electron donors and acceptors, are used to achieve broad emission tunability in the visible spectral range at room temperature. The nature of the photoluminescence is identified as donor-acceptor pair recombination and changes with increasing indium content owing to the changes in the energy states of, and interactions between, donors and acceptors. Structural analysis of GIO nanocrystals by extended X-ray absorption fine structure spectroscopy reveals that In(3+) occupies only octahedral, rather than tetrahedral, sites in the spinel-type γ-Ga(2)O(3) nanocrystal host lattice, until reaching the substitutional incorporation limit of ca. 25%. The emission decay dynamics is also strongly influenced by the nanocrystal structure and composition. The oxygen vacancy defects, responsible for the observed photoluminescence properties, are also implicated in other functional properties, particularly conductivity, enabling the application of colloidal GIO nanocrystals as integrated optoelectronic materials.     

Spectrophotometric determination of urea in dermatologic formulations and cosmetics

A rapid, relatively sensitive, and low-cost method for the determination of water-soluble urea content in dermatological therapy products and cosmetics is proposed using a new spectrophotometric assay with water as the only extraction solvent. Spectrophotometric methods involve addition of a known excess of bromate to urea in an acid medium, followed by the determination of residual bromine and chlorine reacting with methyl orange and measurement of absorbance at 505 nm. The absorbance increases linearly with urea concentration (r = 0.9998). The systems obey Beer's law for 6 - 90 microg ml(-1). The calculated apparent molar absorbance values are found to be 4.537 x 10(3) dm(3) mol(-1) cm(-1) and the Sandell's sensitivity is 0.013 microg cm(-2). The variables affecting the rate of the reaction were investigated. The relative standard deviation for five-replication determination of 60 microg ml(-1) urea was 2.1% and the detection limit of the method is 0.34 ng ml(-1).     

Electronic absorption spectroscopy of cobalt ions in diluted magnetic semiconductor quantum dots: demonstration of an isocrystalline core/shell synthetic method.

This paper reports the application of ligand-field electronic absorption spectroscopy to probe Co(2+) dopant ions in diluted magnetic semiconductor quantum dots. It is found that standard inverted micelle coprecipitation methods for preparing Co(2+)-doped CdS (Co(2+):CdS) quantum dots yield dopant ions predominantly bound to the nanocrystal surfaces. These Co(2+):CdS nanocrystals are unstable with respect to solvation of surface-bound Co(2+), and time-dependent absorption measurements allow identification of two transient surface-bound intermediates involving solvent-cobalt coordination. Comparison with Co(2+):ZnS quantum dots prepared by the same methods, which show nearly isotropic dopant distribution, indicates that the large mismatch between the ionic radii of Co(2+) (0.74 A) and Cd(2+) (0.97 A) is responsible for exclusion of Co(2+) ions during CdS nanocrystal growth. An isocrystalline core/shell preparative method is developed that allows synthesis of internally doped Co(2+):CdS quantum dots through encapsulation of surface-bound ions beneath additional layers of CdS.     

Low-temperature activation and deactivation of high-Curie-temperature ferromagnetism in a new diluted magnetic semiconductor: Ni2+-Doped SnO2

We report the synthesis of colloidal Ni(2+)-doped SnO(2) (Ni(2+):SnO(2)) nanocrystals and their characterization by electronic absorption, magnetic circular dichroism, X-ray absorption, magnetic susceptibility, scanning electron microscopy, and X-ray diffraction measurements. The Ni(2+) dopants are found to occupy pseudooctahedral Sn(4+) cation sites of rutile SnO(2) without local charge compensation. The paramagnetic nanocrystals exhibit robust high-Curie-temperature (T(C)) ferromagnetism (M(s)(300 K) = 0.8 mu(B)/Ni(2+), T(C) > 300 K) when spin-coated into films, attributed to the formation of interfacial fusion defects. Facile reversibility of the paramagnetic-ferromagnetic phase transition is also observed. This magnetic phase transition is studied as a function of temperature, time, and atmospheric composition, from which the barrier to ferromagnetic activation (E(a)) is estimated to be 1200 cm(-1). This energy is associated with ligand mobility on the surfaces of the Ni(2+):SnO(2) nanocrystals. The phase transition is reversed under air but not under N(2), from which the microscopic identity of the activating defect is proposed to be interfacial oxygen vacancies.     

Poly(phenylsilsesquioxane)s: Structural and morphological characterization

Poly(phenylsilsesquioxane) (PPSQ) polymers that were obtained from different synthetic routes were comparatively studied. The polymers were characterized by infrared and solid‐state ²⁹Si NMR spectroscopies. According to the results of X‐ray diffraction and thermogravimetric analyses, the materials richest in silanol showed a less organized network and lower weight loss temperature. The morphology of the products was influenced by the preparation conditions. PPSQ, with a morphology rich in spherical particles, was achieved with an n‐hexadecyltrimethylammonium bromide template in the reaction medium, whereas the morphology of this polymer obtained in the absence of the template was featureless. Small‐angle X‐ray scattering analyses revealed that the PPSQ samples showed a predominance of surface‐fractal behavior. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1580–1589, 2000     

Phase transformation of colloidal In2O3 nanocrystals driven by the interface nucleation mechanism: a kinetic study

The kinetics of phase transformation of colloidal In(2)O(3) nanocrystals (NCs) during their synthesis in solution was explored by a combination of structural and spectroscopic methods, including X-ray diffraction, transmission electron microscopy, and extended X-ray absorption fine structure spectroscopy. Johnson-Mehl-Avrami-Erofeyev-Kholmogorov (JMAEK) and the interface nucleation models were used to analyze the isothermal kinetic data for the phase transformation of NCs in the temperature range of 210-260 °C. The results show that NCs are initially stabilized in the metastable corundum (rh-In(2)O(3)) phase. The phase transformation occurs via nucleation of cubic bixbyite (bcc-In(2)O(3)) phase at the interface between contacting rh-In(2)O(3) NCs, and propagates rapidly throughout the NC volume. The activation energy of the phase transformation was determined from the Arrhenius expression to be 152 ± 60 kJ/mol. The interface nucleation rate is maximal at the beginning of the phase transformation process, and decreases over the course of the reaction due to a decrease in the concentration of rh-In(2)O(3) NCs in the reaction mixture. In situ high-temperature XRD patterns collected during nonisothermal treatment of In(2)O(3) NCs reveal that phase transformation of smaller NCs occurs at a faster rate and lower temperature, which is associated with their higher packing density and contact formation probability. Because NC surfaces and interfaces play a key role in phase transformation, their control through the synthesis conditions and reaction kinetics is an effective route to manipulate NC structure and properties.     

Thermo- and pH-Responsive Gelatin/Polyphenolic Tannin/Graphene Oxide Hydrogels for Efficient Methylene Blue Delivery

Gelatin (GE), amino-functionalized polyphenolic tannin derivative (TN), and graphene oxide (GO) were associated to yield thermo- and pH-responsive hydrogels for the first time. Durable hydrogel assemblies for drug delivery purposes were developed using the photosensitizer methylene blue (MB) as a drug model. The cooling GE/TN blends provide brittle physical assemblies. To overcome this disadvantage, different GO contents (between 0.31% and 1.02% wt/wt) were added to the GE/TN blend at 89.7/10.3 wt/wt. FTIR and RAMAN spectroscopy analyses characterized the materials, indicating GO presence in the hydrogels. Incorporation studies revealed a total MB (0.50 mg/mL) incorporation into the GE/TN-GO hydrogel matrices. Additionally, the proposed systems present a mechanical behavior similar to gel. The GO presence in the hydrogel matrices increased the elastic modulus from 516 to 1650 Pa. SEM revealed that hydrogels containing MB present higher porosity with interconnected pores. Dissolution and swelling degree studies revealed less stability of the GE/TN-GO-MB hydrogels in SGF medium (pH 1.2) than SIF (pH 6.8). The degradation increased in SIF with the GO content, making the polymeric matrices more hydrophilic. MB release studies revealed a process controlled by Fickian diffusion. Our results point out the pH-responsible behavior of mechanically reinforced GE/TN-GO-MB hydrogels for drug delivery systems purposes.