Use of new composite materials for the determination of Cu, Cd, Mo, As, and Sb in biological samples by radiochemical neutron activation analysis

Summary  Vezetéknév     

Early reactions of light-induced protochlorophyllide and chlorophyllide transformations analyzed in vivo at room temperature with a diode array spectrofluorometer

The steps of protochlorophyllide (Pchlide) photoreduction and subsequent chlorophyllide (Chlide) transformations which occur in the seconds to minutes time-scale were studied using a diode array spectrofluorometer in dark-grown barley leaves. The intensity of the excitation light was varied between 3 and 2,500 micromol m(-2) s(-1) and a series of fluorescence spectra were recorded at room temperature in the seconds and minutes time scales. In certain experiments, 77-K emission spectra were measured with the same equipment. The high quality of the spectra allowed us to run spectral resolution studies which proved the occurrence, at room temperature, of multiple Pchlide and Chlide forms found previously in 77-K spectra. The comparison of the 77-K and room-temperature spectra showed that the fluorescence yields of the nonphotoactive 633-nm Pchlide form and of the Chlide product emitting at 678 nm were temperature independent. The fluorescence intensity of aggregated NADPH-pigment-POR complexes (photoactive 656-nm Pchlide and 693-nm Chlide forms) were strongly increased at 77 K, while that of the NADP(+)-Chlide-POR (684-686-nm Chlide form) was much less affected by temperature. Information was obtained also about the dynamics of the transformation of pigment forms in the light at different photon densities. At low light intensities, the phototransformation of the 642-644-nm Pchlide form was faster than that of the 654-656-nm form. The relative amplitudes of Gaussian components related to different Chlide forms found after exposure to a constant amount of photons strongly depended on the light intensity used. Strong quenching of all Chlide components occurred upon prolonged exposure to high intensity light. These effects are discussed by considering the interconversion processes between different forms of the pigment-protein complexes, their relative fluorescence yields and energy migration processes.     

Enantioselective Preparation of 2‐Aminomethyl Carboxylic Acid Derivatives: Solving the β2‐Amino Acid Problem with the Chiral Auxiliary 4‐Isopropyl‐5,5‐diphenyloxazolidin‐2‐one (DIOZ). Preliminary Communication

Multigram amounts of suitably protected β²‐amino acids with 17 of the 20 proteinogenic side chains are prepared by diastereoselective reactions of Li, B, or Ti enolates of the corresponding 3‐acyl‐4‐isopropyl‐5,5‐diphenyloxazolidin‐2‐ones (acyl‐DIOZ; 1 ) with appropriate electrophiles (amidomethylation, hydroxyalkylation, (benzyloxycarbonyl)methylation) in yields of 55–90% and with diastereoselectivities of 80 to >97% (Scheme). The primary products 2 – 8 thus obtained are converted to protected β²‐amino acids by standard procedures (Table 1). Many of the DIOZ derivatives are highly crystalline compounds (31 X‐ray crystal structures in Table 2). The chiral auxiliary DIOZ, readily prepared in either enantiomeric form, is recovered with high yield.     

The additivity principle in pyrolysis—gas chromatography of brown coal

Pyrolysis—gas chromatography of brown coal exhibits additive properties and it is therefore possible to construct the pyrogram of the original coal from the individual pyrograms of the bitumen, humic acids, lignin and humin fractions. The contents of phenols in the pyrograms are typical for all of the above classes except bitumen and are in agreement with the contents of the individual groups in the original coal. The results suggest that the separation does not bring about significant chemical changes in individual brown coal fractions.     

Thermal analysis and kinetics of the copper-lead matte roasting process

In this paper, the results of copper-lead matte investigations are presented. Investigated copper-lead matte is intermediate product of the lead production in TREPCA-Zvečan. In the first part of the paper characterization of starting material is presented, consisting of: chemical composition analysis (XRQ), scanning electron microscopy (SEM) and diffractometry (XRD). Thermal properties of investigated matte were determined using differential thermal analysis (DTA) at characteristic temperatures. Using results of induced analysis, mechanism of matte oxidation process was determined. In the second part of the paper kinetic parameters describing oxidative roasting of copper-lead matte are presented. For activation energy calculations, non-isothermal methods defined by Kissinger and Ozawa were used [1, 2]. Kinetic equation describing oxidation process was determined using Sharps method of reduced half time of reaction [3].     

OXYGEN QUENCHING OF CHLOROPHYLL FLUORESCENCE IN CHLOROPLASTS

Abstract— Three phases of chlorophyll a fluorescence quenching by O₂ are observed in green plants. The effects of various inhibitors on photosynthetic partial processes in chloroplasts were investigated in attempts to (1) localize the O₂-quenching sites and (2) assess possible physiological significance of O₂-quenching. Our results localize the most sensitive (and presumably functionally important) phase to a site between plastoquinone and the photosystem I acceptor, chlorophyll (P₇₀₀), possibly plastocyanin. It is suggested that PC may transfer electrons to oxygen in addition to P₇₀₀.     

Composite ion exchanger with ammonium molybdophosphate and its properties

An organic binding polymer based on polyacrylonitrile (PAN) was used for the preparation of the composite exchanger containing ammonium molybdophosphate (AMP) as the active component. Due to the improvement of granulometric properties of powdered AMP with a binding polymer, an exchanger suitable for the application in column operations was prepared. Study of the properties of the exchanger AMP-PAN proved that kinetics of cesium sorption, capacity of the exchanger for cesium and desorption of cesium are not influenced by the binding polymer. The composite exchanger AMP-PAN described is therefore suitable for the selective separation and concentration of cesium and purification of radioactive wastes from¹³⁷Cs.     

Fast concentration of dissolved forms of cesium radioisotopes from large seawater samples

The method developed for cesium concentration from large freshwater samples was tested and adapted for analysis of cesium radionuclides in seawater. Concentration of dissolved forms of cesium in large seawater samples (about 100 L) was performed using composite absorbers AMP-PAN and KNiFC-PAN with ammonium molybdophosphate and potassium–nickel hexacyanoferrate(II) as active components, respectively, and polyacrylonitrile as a binding polymer. A specially designed chromatography column with bed volume (BV) 25 mL allowed fast flow rates of seawater (up to 1,200 BV h^?1). The recovery yields were determined by ICP-MS analysis of stable cesium added to seawater sample. Both absorbers proved usability for cesium concentration from large seawater samples. KNiFC-PAN material was slightly more effective in cesium concentration from acidified seawater (recovery yield around 93 % for 700 BV h^?1). This material showed similar efficiency in cesium concentration also from natural seawater. The activity concentrations of ¹³⁷Cs determined in seawater from the central Pacific Ocean were 1.5 ± 0.1 and 1.4 ± 0.1 Bq m^?3 for an offshore (January 2012) and a coastal (February 2012) locality, respectively, ¹³⁴Cs activities were below detection limit (<0.2 Bq m^?3).     

In-bone protein digestion followed by LC-MS/MS peptide analysis as a new way towards the routine proteomic characterization of human maxillary and mandibular bone tissue in oral surgery

Proteomic characterization of alveolar bones in oral surgery represents an analytical challenge due to their insoluble character. The implementation of a straightforward technique could lead to the routine use of proteomics in this field. This work thus developed a simple technique for the characterization of bone tissue for human maxillary and mandibular bones. It is based on the direct in-bone tryptic digestion of proteins in both healthy and pathological human maxillary and mandibular bone samples. The released peptides were then identified by the LC-MS/MS. Using this approach, a total of 1120 proteins were identified in the maxillary bone and 1151 proteins in the mandibular bone. The subsequent partial least squares–discrimination analysis (PLS-DA) of protein data made it possible to reach 100% discrimination between the samples of healthy alveolar bones and those of the bone tissue surrounding the inflammatory focus. These results indicate that the in-bone protein digestion followed by the LC-MS/MS and subsequent statistical analysis can provide a deeper insight into the field of oral surgery at the molecular level. Furthermore, it could also have a diagnostic potential in the differentiation between the proteomic patterns of healthy and pathological alveolar bone tissue. Data are available via ProteomeXchange with the identifier PXD026775.     

Analytical Performance of Clay Paste Electrode and Graphene Paste Electrode-Comparative Study

The analytical performance of the clay paste electrode and graphene paste electrode was compared using square wave voltammetry (SWV) and cyclic voltammetry (CV). The comparison was made on the basis of a paracetamol (PA) determination on both working electrodes. The influence of pH and SWV parameters was investigated. The linear concentration ranges were found to be 6.0 × 10⁻⁷–3.0 × 10⁻⁵ and 2.0 × 10⁻⁶–8.0 × 10⁻⁵ mol L⁻¹ for clay paste electrode (ClPE) and graphene paste electrode (GrPE), respectively. The detection and quantification limits were calculated as 1.4 × 10⁻⁷ and 4.7 ×10⁻⁷ mol L⁻¹ for ClPE and 3.7 × 10⁻⁷ and 1.2 × 10⁻⁶ mol L⁻¹ for GrPE, respectively. Developed methods were successfully applied to pharmaceutical formulations analyses. Scanning electron microscopy and energy-dispersive X-ray spectroscopy were used to characterize ClPE and GrPE surfaces. Clay composition was examined with wavelength dispersive X-ray (WDXRF).