Non-isothermal kinetics of dehydration of equilibrium swollen poly(acrylic acid) hydrogel</o:p>

Summary Kinetics of dehydration of equilibrium swollen poly(acrylic acid) hydrogel was investigated using methods of non-isothermal thermal analysis. Methods of Kissinger, Coats-Redfern, Van Krevelen and Horowitz-Metzger were applied for determination the kinetics parameters: activation energy (E), pre-exponent (lnA) as well as the kinetics model ƒ(69) for the process of hydrogel dehydration under different heating rates. An existence of good agreement between determined values of kinetic parameters (Eand A), which were obtained applying different methods under the same heating rate. Functional relationship between changes of kinetic parameters of dehydration and changes of heating rate was established. An existence of compensation effect is accepted and explanation of compensation effect appearance during the hydrogel dehydration is suggested.     

Influence of the activation temperature on structural and textural properties of NiMo/Al2O3 hydrodesulfurization catalysts

Investigations of a commercial NiMo/Al₂O₃ hydrodesulfurization (HDS) catalyst are directed towards optimization of the activation procedure of HDS catalyst concerning active phase formation and thermal stability. Structural and textural data obtained with XRD, IR-FTIR, XPS and LTNA reveal that the optimal temperature for the formation of active species on the catalyst surface and an appropriate pore structure is 300°C.     

Combination of three analytical techniques for speciation of Al in environmental samples

An analytical scheme is proposed which combines three speciation techniques for determination of particular Al species in soil extracts and percolating waters. A cation-exchange fast protein liquid chromatography — inductively coupled plasma atomic emission spectrometry (FPLC-ICP-AES) procedure, a microcolumn chelating ion-exchange chromatography- atomic absorption spectrometry (MCC-ETAAS) technique and the 8-hydroxyquinoline spectrophotometric method (8HQ-spectrophotometry) were employed. The FPLC-ICP-AES procedure offers determination of Al³⁺ (retention time 4.5 min) and Al(OH)²⁺ species (retention time 4.0 min) which are separated from Al(OH)⁺ ₂ (retention time 1.5min). AlF²⁺ coelutes with Al(OH)²⁺ species, while Al(SO₄)⁺, AlF⁺ ₂ and negatively charged Al organic complexes coelute with Al(OH)⁺ ₂ species. The MCC-ETAAS technique enables determination of the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphate- and fluoro-Al complexes. Employing the 8HQ-spectrophotometry the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphato- and most of the labile organic Al species are determined. The sensitivities of these selected techniques were adequate for speciation of Al in the samples analyzed. On the basis of the specific selectivity of a particular technique various groups of Al species may be determined. Thus, the comparison of analytical data from complementary procedures provides more comprehensive information on Al species present in soil extracts and percolating waters.     

A Study of PbTiO3 Crystallization in Pure and Composite Nanopowders Prepared by the Sol-Gel Technique

Summary.  In this investigation the crystallization of PbTiO₃ upon annealing of pure nanopowders and PbTiO₃–SiO₂ (1:1 v/v) nanocomposite powders prepared by the sol-gel technique was studied. Using X-ray diffraction phase analysis, the start of PbTiO₃ crystallization in pure PbTiO₃ powders was detected at 400°C. Distinct crystallization of PbTiO₃ in PbTiO₃–SiO₂ nanocomposites starts at 700°C, whereas SiO₂ remains amorphous. There are indications that an interface interaction between the PbTiO₃ and the SiO₂ phase plays an important role in hindering the crystallization of PbTiO₃. The particle size (size of coherently scattering regions) was estimated from the broadening of the X-ray diffraction line profiles. The average size of PbTiO₃ nanocrystallites increases with temperature and time of annealing, the influence of temperature being more significant than that of the annealing time. Differential scanning calorimetry confirmed the results of the X-ray diffraction with respect to the start of the crystallization. Laser beam scattering and scanning electron microscopy provided the statistical distribution of the grain size and the morphology of the powder grains, showing that each grain of the powders contains several nanocrystallites (coherently scattering regions). Received October 4, 2001. Accepted (revised) December 14, 2001     

Bis(ammonium) fluorophosphate at room temperature

The title room‐temperature phase of (NH₄)₂(PO₃F) is orthorhombic (Pna2₁) and is related to the β‐K₂SO₄ structure family. The title structure consists of ammonium cations, NH₄⁺, and fluoro­phosphate anions, (PO₃F)^2?. These ions are connected by N—H?O hydrogen bonds. Two‐centre N—­H?F hydrogen bonds are not present in the structure. Phase transitions were detected at 251±2 and 274±2 K during cooling and heating, respectively.     

Oxidation states of technetium in diphosphonate complexes

Valence states of technetium in two most prominent bone imaging agents. i.e., their model complexes with⁹⁹Tc (⁹⁹Tc-MDP and⁹⁹Tc-DPD) were determined by redox potentiometric titration. Titrations of⁹⁹Tc-pertechnetate by Sn(II) solutions were performed in the presence of a ligand (MDP or DPD), as well as without them. Tc(III) was obtained in complexes with MDP and DPD in strongly alkaline medium (pH 12–13) while in the absence of the ligands Tc(IV) was formed. In strongly acidic medium (pH 2–3) the redox process resulted Tc(IV) in both complexes, while Tc(III) was formed in the absence of the ligands. At pH values near neutral or exactly neutral (important for radiopharmaceutical complexes^99mTc-MDP and^99mTc-DPD), it was possible to perform titrations in the ligand absence only at pH values from 7 to 11.8 (due to in hydrolysis) while the resulting oxidation state of Tc in the presence of ligand depended on the used ligand: Tc(IV)-MDP (pH 5.4–5.9 and pH 7.0–7.4), and Tc(III)-DPD (pH 8.0).     

Characterization analysis of raw and pyrolyzed plane tree seed (Platanus orientalis L.) samples for its application in carbon capture and storage (CCS) technology

Journal of Thermal Analysis and Calorimetry - Raw and pyrolyzed samples of the plane tree seeds (PTS) were tested by various advanced analytical techniques including simultaneous TG-DSC technique,...     

Mechanical and anti‐stabbing properties of modified thermoplastic polymers impregnated multiaxial p‐aramid fabrics

New forms of hybrid multiaxial nanocomposites with enhanced mechanical and stab resisting properties are presented. This study is motivated by the lack of knowledge in the study of the multiaxial fabric nanocomposites with two modified thermoplastic matrices for antiballistic protection. Introduction of 5 wt.% silica nanoparticles in the composite of polyurethane/p‐aramid/poly (vinyl butyral) leads to significant improvement in mechanical properties, and the addition of silane as a coupling agents and glutaraldehyde as a crosslinking agents yielded maximal values of storage modulus, tensile modulus and anti‐stabbing properties for hybrid nanocomposites. Ballistic resistance testing and penetration depth of the hybrid nanocomposites were visualized using image analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermal characterization and isothermal kinetic analysis of commercial Creosote decomposition process

Isothermal decomposition process of commercial Creosote was analyzed by thermogravimetric technique in a nitrogen atmosphere, at four different operating temperatures (T = 230, 250, 270, and 290 °C). It was found that the two-parameter autocatalytic ?esták–Berggren kinetic model best describes the investigated process. It was established that the applied logistic function can successfully perform a given kinetic predictions of investigated process, at all operating temperatures. The experimental density distribution function of the apparent activation energy values was evaluated. Based of the characteristic shape of distribution curve, it was concluded that the isothermal pyrolysis of commercial Creosote represent a complex process, which probably includes primary and secondary (autocatalytic) pyrolysis reactions, together with various decomposition reactions and radicals recombination pathways.     

Identification of the effective distribution function for determination of the distributed activation energy models using Bayesian statistics: Application of isothermal thermogravimetric data

The new procedure for identification of the effective distribution function for determination of the distributed activation energy models, which is based on the Bayesian statistics, has been established. The five different continuous probability functions (exponential, logistic, normal, gamma and Weibull probability functions (the extended set of distributions)) were used for searching the most appropriate reactivity model for two heterogeneous processes: (a) the isothermal reduction process of nickel oxide under hydrogen atmosphere and (b) the isothermal degradation process of bisphenol‐A polycarbonate (Lexan) under nitrogen atmosphere. Using the Bayes weights, it was shown that for both processes, the most suitable distributed reactivity model is the Weibull distribution model. The kinetic parameters (ln A, E_a) attached with the Weibull distribution model were calculated for both investigated processes, using three different computational methods (the maximum likelihood method (MLM), the nonlinear regression analysis (NRA), and the posterior mean (the expected value of scale parameter η, E(η)). It was shown that there is an excellent agreement between the values of kinetic parameters calculated by the MLM, NRA, and E(η) approaches. Using Bayes weights, it is possible to discriminate between different probability models and to quantify how well a distribution fits the experimental data. For the formal reactivity model comparison, the use of the (nonnormalized) Jeffreys prior is recommended. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 641–658, 2010