Determination of Chromium (VI) in Airborne Particulate Matter by Electrothermal Atomic Absorption Spectrometry

Hexavalent chromium Cr(VI) is a well-established carcinogen associated with lung, nasal, and sinus cancer. Cr(VI) threshold limit values in workroom air have been recently lowered. Consequently, the currently available analytical methods are insufficiently sensitive or high cost. In this paper, a simple, cost-effective, sensitive, and reproducible method using solid-phase extraction with electrothermal atomic absorption spectrometry for determination of hexavalent chromium in airborne samples is reported. The method validation included selectivity, linearity, accuracy, and precision. Interferences from other ions likely to be present in airborne samples, including trivalent chromium, were tested and selectivity was demonstrated. The detection and quantification limits were, respectively, as low as 0.1 and 0.4?µg?L^?1. The linearity ranged from 0.5 to 50.0?µg?L^?1, with a regression coefficients exceeding 0.998. The extraction recovery exceeded 98%. The developed method was successfully compared with a reference spectrophotometric method. The performances achieved were similar to ion chromatography and high-performance liquid chromatography approaches. The novel method was tested on airborne samples collected from the workplace. The method’s performance suggests that it may be an alternative to high-cost techniques for monitoring occupational exposure to hexavalent chromium.     

Enhanced UV photosensing properties of ZnO nanowires prepared by electrodeposition and atomic layer deposition

A new process enabling the synthesis of zinc oxide (ZnO) and Al-doped ZnO nanowires (NWs) for photosensing applications is reported. By combining atomic layer deposition (ALD) for the seed layer preparation and electrodeposition for the NW growth, high-quality ZnO nanomaterials were prepared and tested as ultraviolet (UV) sensors. The obtained NWs are grown as arrays perpendicular to the substrate surface and present diameters between 70 and 130 nm depending on the Al doping, as seen from scanning electron microscopy (SEM) studies. Their hexagonal microstructure has been determined using X-ray diffraction and Raman spectroscopy. An excellent performance in UV sensing has been observed for the ZnO NWs with low Al doping, and a maximal photoresponse current of 11.1 mA has been measured. In addition, initial studies on the stability have shown that the NW photoresponse currents are stable, even after ten UV on/off cycles.     

Enhancing techniques for learning decision trees from imbalanced data

Advances in Data Analysis and Classification - Several machine learning techniques assume that the number of objects in considered classes is approximately similar. Nevertheless, in real-world...     

Michael addition of 1,3-dicarbonyl compounds catalyzed by iron oxide nanoparticles

Several iron oxides nanoparticles (Fe₂O₃@Fe₂O₃, Fe°@Fe₂O₃, GO@Fe₂O₃ and calcinated Fe₂O₃) have been assessed as catalysts in the 1,4-addition of a cyclic β-ketoester onto methyl vinyl ketone under neat conditions. It appeared that calcinated Fe₂O₃NP are efficient catalysts at 1?mol% loading for the Michael addition of 1,3-dicarbonyl compounds onto various enones.     

Aqueous behaviour of cationic surfactants containing a cleavable group

The aggregation behaviour of two novel cationic RAFT agents (transfer surfactants); N,N-dimethyl-N-(4-(((phenylcarbonothioyl)thio)methyl)benzyl)ethanammonium bromide (PCDBAB) and N-(4-((((dodecylthio)-carbonothioyl)thio)methyl)benzyl)-N,N-dimethylethanammonium bromide (DCTBAB) in diluted solutions have been investigated by surface tension, conductimetry and microcalorimetry measurements. The thermodynamic parameters i.e. the critical micelle concentration (cmc), the degree of micelle ionization (alpha), the head group surface area (a 0), Delta H mic, Delta G mic and T Delta S mic are reported at 303 K. The thermodynamic parameters have been compared to those of the conventional surfactant cetyltrimethylammonium bromide (CTAB) in order to specify structural relationships. The obtained results have been discussed considering the hydrophobic behaviour of the S-C=S- linkage and the specific interactions that arise from the introduction of the benzene ring into the hydrophobic part.     

Dynamics of the flowfield generated by the interaction of twin inclined jets of variable temperatures with an oncoming crossflow

The present paper examines the common configuration of “twin inclined jets in crossflow” that is widely present in several industrial and academic, small and large-scale applications. It is particularly found in aerodynamic and engineering applications like VTOL aircrafts, the combustion mixing process and other chemical chambers. It can also be found in some domestic applications like chimney stacks or water discharge piping systems in rivers and seas. The twin jets considered in this work are elliptic as inclined with a 60° angle and arranged inline with the oncoming crossflow according to a jet spacing of three diameters. They are examined experimentally in a wind tunnel. The corresponding data is tracked by means of the particle image velocimetry technique in order to obtain the different instantaneous and mean dynamic features (different velocity components, vortices, etc.). The same case is numerically reproduced by the resolution of the Navier–Stokes equations by means of the finite volume method together with the Reynolds stress model second order turbulent closure model. A non-uniform mesh system tightened close to the emitting nozzles is also adopted. The comparison of the measured and calculated data gave a satisfying agreement. Further assumptions are adopted later in order to improve the examined configuration: a non-reactive fume is injected within the discharged jets and the jets’ temperature is varied with reference to a constant mainstream temperature. Our aim is to evaluate precisely the impact of this temperature difference on the flow field, particularly on the dynamics of the jets in a crossflow. This parameter, namely the temperature difference, proved mainly to accelerate the discharged jet plumes in the direction of the main flow, which enhanced the mixing, particularly in the longitudinal direction. The mixing in the other directions was also increased due to the weaker density of the jets, which enabled them to progress relatively unhindered before undergoing the impact of the crossflow.     

Improvement of photoluminescence and electrical properties of porous silicon layer treated with lanthanum

The influence of surface treatment of porous silicon (PS) in lanthanum (La) containing solution during different times on its photoluminescence and electrical properties has been investigated. For this purpose, chemical composition, structural, vibrational, photoluminescence and electrical characteristics of the porous silicon layer with and without lanthanum were examined using X-ray diffractometry (XRD), energy dispersive X-ray (EDX) spectroscopy, Fourier transmission infrared (FTIR) spectroscopy, photoluminescence (PL) spectroscopy and current–voltage (I–V) measurements. The results indicate that porous silicon layers treated with lanthanum exhibit an enhancement of photoluminescence intensity and show an improvement current intensity compared to untreated porous silicon layer.     

Regenerative,low-cost and switchable photoelectrochemical sensor for detection of Cu2+ using MnO2-GO heterojunction

Journal of Solid State Electrochemistry - In this work, we investigate the properties of manganese dioxide (MnO2) and graphene oxide (GO) to develop a new photoelectrochemical (PEC) sensor-based...