Adsorption of CO gas molecules on zigzag BN/AlN nanoribbons for nano sensor applications

First-principle calculations have been performed to study the sensing of CO gas in various considered configurations. The adsorption of CO on zigzag BN nanoribbon (ZBNNR) and zigzag AlN nanoribbon (ZAlNNR) was modelled in five different possibilities. The effect of CO adsorption is to reduce the band gap in both types (BN/AlN) of the nanoribbons. Interestingly, a finite magnetic moment (0.96 ${\mu }_B$ for ZBNNR and 0.69 ${\mu }_B$ for ZAlNNR) has been obtained which depends upon the adsorption configuration of CO. Half-metallicity was also observed upon selective CO adsorption on ZAlNNR irrespective of the ribbon width. Present findings suggest that CO gas molecules could be detected through adsorption on BN/AlN nanoribbons via changes in electronic and/or magnetic properties.     

Synthesis and evaluation of thermal, photophysical and magnetic properties of novel starlike fullerene–organosilane macromolecules

Thermal, photophysical and magnetic properties of some novel fullerenol–silane adducts are described. Excellent improvement of thermal stability and high char yield due to the presence of silicon is the key feature of these adducts. Highest luminescence quenching due to maximum π–π electronic interactions between phenyl ring and fullerene are observed in the aromatic-silane adducts and the quenching ability of the aromatic ring reduces with further delocalization of the π-electrons as in naphthyl silane. The alkyl vinyl silane, on the other hand, records better fluorescence intensity owing to increase population of the electron density (+I effect) and non-effective charge transfer complex formation between isolated vinylic double bond and fullerene. Emission peak positions of these adducts are comparable to fullerenol because of control derivatization of fullerene ring causing less perturbation of the symmetric π-electronic system. These adducts are paramagnetic in nature with peaks around 3515 G and higher g-values (2.005–2.009) compared to fullerenol (1.985). The fullerenol–silane adducts are synthesized using fullerenol as substrate and different chloro and alkoxy silanes as silylating agents adopting simple nucleophilic displacement and transesterification reactions. All the fullerenol–silane adducts are characterized spectroscopically.     

Neuroprotective Ability of Apocynin Loaded Nanoparticles (APO-NPs) as NADPH Oxidase (NOX)-Mediated ROS Modulator for Hydrogen Peroxide-Induced Oxidative Neuronal Injuries

Apocynin (APO) is a known multi-enzymatic complexed compound, employed as a viable NADPH oxidase (NOX) inhibitor, extensively used in both traditional and modern-day therapeutic strategies to combat neuronal disorders. However, its therapeutic efficacy is limited by lower solubility and lesser bioavailability; thus, a suitable nanocarrier system to overcome such limitations is needed. The present study is designed to fabricate APO-loaded polymeric nanoparticles (APO-NPs) to enhance its therapeutic efficacy and sustainability in the biological system. The optimized APO NPs in the study exhibited 103.6 ± 6.8 nm and −13.7 ± 0.43 mV of particle size and zeta potential, respectively, along with further confirmation by TEM. In addition, the antioxidant (AO) abilities quantified by DPPH and nitric oxide scavenging assays exhibited comparatively higher AO potential of APO-NPs than APO alone. An in-vitro release profile displayed a linear diffusion pattern of zero order kinetics for APO from the NPs, followed by its cytotoxicity evaluation on the PC12 cell line, which revealed minimal toxicity with higher cell viability, even after treatment with a stress inducer (H₂O₂). The stability of APO-NPs after six months showed minimal AO decline in comparison to APO only, indicating that the designed nano-formulation enhanced therapeutic efficacy for modulating NOX-mediated ROS generation.     

Effects of albumin and erythrocyte membranes on spread monolayers of lung surfactant lipids

Dipalmitoyl phosphatidylcholine (DPPC), one of the main constituents of lung surfactant is mainly responsible for reduction of surface tension to near 0 mN/m during expiration, resisting alveolar collapse. Other unsaturated phospholipids like palmitoyloleoyl phosphatidylglycerol (PG), palmitoyloleoyl phosphatidylcholine (POPC) and neutral lipids help in adsorption of lung surfactant to the air-aqueous interface. Lung surfactant lipids may interact with plasma proteins and hematological agents flooding the alveoli in diseased states. In this study, we evaluated the effects of albumin and erythrocyte membranes on spread films of DPPC alone and mixtures of DPPC with each of PG, POPC, palmitoyloleoyl phosphatidylethanolamine (PE), cholesterol (CHOL) and palmitic acid (PA) in 9:1 molar ratios. Surface tension-area isotherms were recorded using a Langmuir-Blodgett (LB) trough at 37 degrees C with 0.9% saline as the sub-phase. In the presence of erythrocyte membranes, DPPC and DPPC+PA monolayers reached minimum surface tensions of 7.3+/-0.9 and 9.6+/-1.4 mN/m, respectively. Other lipid combinations reached significantly higher minimum surface tensions >18 mN/m in presence of membranes (Newman Keul's test, p<0.05). The relative susceptibility to membrane inhibition was [(DPPC+PG, 7:3)=(DPPC+PG, 9:1)=(DPPC+POPC)=(DPPC+PE)=(DPPC+CHOL)]>[(DPPC+PA)=(DPPC)]. The differential response was more pronounced in case of albumin with DPPC and DPPC+PA monolayers reaching minimum surface tensions less than 2.4 mN/m in presence of albumin, whereas DPPC+PG and DPPC+POPC reached minimum surface tensions of around 20 mN/m in presence of albumin. Descending order of susceptibility of the spread monolayers of lipid mixtures to albumin destabilization was as follows: [(DPPC+PG, 7:3)=(DPPC+PG, 9:1)=(DPPC+POPC)]>[(DPPC+PE)=(DPPC+CHOL)]>[(DPPC+PA)=(DPPC)] The increase in minimum surface tension in presence of albumin and erythrocyte membranes was accompanied by sudden increases in compressibility at surface tensions of 15-30 mN/m. This suggests a monolayer destabilization and could be indicative of phase transitions in the mixed lipid films due to the presence of the hydrophobic constituents of erythrocyte membranes.     

FTIR, Raman spectra and ab initio calculations of 2-mercaptobenzothiazole

FTIR and Raman spectra of a rubber vulcanization accelerator, 2-mercaptobenzothiazole (MBT), were recorded in the solid phase. The harmonic vibrational wavenumbers, for both the toutomeric forms of MBT, as well as for its dimeric complex, have been calculated, using ab initio RHF and density functional B3LYP methods invoking different basis sets upto RHF/6-31G** and B3LYP/6-31G** and the results were compared with the experimental values. Conformational studies have been also carried out regarding its toutomeric monomer forms and its dimer form. With all the basis sets the thione form of MBT (II) is predicted to be more stable than thiol form (I) and dimeric conformation (III) is predicted to be more stable with monomeric conformations (I) and (II). Vibrational assignments have been made, and it has been found that the calculated normal mode frequencies of dimeric conformation (III) are required for the analysis of IR and Raman bands of the MBT. The predicted shift in NH- stretching vibration towards the lower wave number side with the B3LYP/6-31G** calculations for the most stable dimer form (III), is in better agreement with experimental results. The intermolecular sulfur-nitrogen distance in N-H...S hydrogen bond was found to be 3.35 angstroms from these calculations, is also in agreement to the experimental value.     

A new spectrophotometric method for the determination of hydrazine in environmental samples

Summary Hydrazine is determined spectrophotometrically by using veratraldehyde (3,4-dimethoxybenzaldehyde) as a new reagent. The reaction is based on the condensation of veratraldehyde with hydrazine in acidic medium. The resulting yellow coloured condensation product has maximum absorption at 410 nm. The colour system obeys Beer's law in the range of 0.065 to 0.3 g/ml of hydrazine. Molar absorptivity and Sandell's sensitivity are found to be 6.72×10⁴ l mol^–1 cm^–1 (±100) and 0.0004 g cm^–2, respectively. The method is successfully applied for the determination of hydrazine in polluted water, biological samples, in isoniazide tablets and in air. It is compared with other reported spectrophotometric methods and is found to be of comparable sensitivity.     

Gap functions and error bounds for quasi variational inequalities

The paper aims to obtain new local/global error bounds for quasi variational inequality problems in terms of the regularized gap function and the D-gap function. These bounds provide effective estimated distances between a specific point and the exact solution of quasi variational inequality problem.     

Magnetization in permalloy thin films

Thin films of permalloy (Ni₈₀Fe₂₀) were prepared using an Ar+N₂ mixture with magnetron sputtering technique at ambient temperature. The film prepared with only Ar gas shows reflections corresponding to the permalloy phase in X-ray diffraction (XRD) pattern. The addition of nitrogen during sputtering results in broadening of the peaks in XRD pattern, which finally leads to an amorphous phase. The M-H loop for the sample prepared with only Ar gas is matching well with the values obtained for the permalloy. For the samples prepared with increased nitrogen partial pressure the magnetic moment decreased rapidly and the values of coercivity increased. The polarized neutron reflectivity measurements (PNR) were performed in the sample prepared with only Ar gas and with nitrogen partial pressure of 5 and 10%. It was found that the spin-up and spin-down reflectivities show exactly similar reflectivity for the sample prepared with Ar gas alone, while PNR measurements on 5 and 10% sample show splitting in the spin-up and spin-down reflectivity.      

Enantioselective total syntheses of (−)-clavaminol A and deacetyl (+)-clavaminol H

An efficient enantioselective approach to the syntheses of (?)-clavaminol A and deacetyl (+)-clavaminol H is presented, starting from n-decanol. The synthesis features Sharpless asymmetric dihydroxylation (AD), regioselective epoxide formation/opening and α-tosylation as key steps.