Comportement de LiAlH4 en fonction de la dilution dans la racemisation d'un silane optiquement actif en milieu thf

The optically active methylphenyl-α-naphthylsilane racemises quickly in tetrahydrofuran in the presence of LiAlH₄.Kinetic results show a different behaviour of the hydride depending on its concentration. Activation parameters have been obtained and mechanisms proposed.     

Ultraviolet Spectroscopic Detection of Nitrate and Nitrite in Seawater Simultaneously Based on Partial Least Squares

A direct, reagent-free, ultraviolet spectroscopic method for the simultaneous determination of nitrate (NO₃⁻), nitrite (NO₂⁻), and salinity in seawater is presented. The method is based on measuring the absorption spectra of the raw seawater range of 200–300 nm, combined with partial least squares (PLS) regression for resolving the spectral overlapping of NO₃⁻, NO₂⁻, and sea salt (or salinity). The interference from chromophoric dissolved organic matter (CDOM) UV absorbance was reduced according to its exponential relationship between 275 and 295 nm. The results of the cross-validation of calibration and the prediction sets were used to select the number of factors (4 for NO₃⁻, NO₂⁻, and salinity) and to optimize the wavelength range (215–240 nm) with a 1 nm wavelength interval. The linear relationship between the predicted and the actual values of NO₃⁻, NO₂⁻, salinity, and the recovery of spiked water samples suggest that the proposed PLS model can be a valuable alternative method to the wet chemical methods. Due to its simplicity and fast response, the proposed PLS model can be used as an algorithm for building nitrate and nitrite sensors. The comparison study of PLS and a classic least squares (CLS) model shows both PLS and CLS can give satisfactory results for predicting NO₃⁻ and salinity. However, for NO₂⁻ in some samples, PLS is superior to CLS, which may be due to the interference from unknown substances not included in the CLS algorithm. The proposed method was applied to the analysis of NO₃⁻, NO₂⁻, and salinity in the Changjiang (Yangtze River) estuary water samples and the results are comparable with that determined by the colorimetric Griess assay.     

“Homodoping” strategy for building conducting Langmuir-Blodgett films

A strategy leading to the formation of conducting LB films without any doping treatment is investigated. The method consists of mixing, within the same layer, semi-amphiphilic and amphiphilic derivatives of the same electroactive nucleus (here Tetracyanoquinodimethane (TCNQ)). LB films obtained in this way with the sulphonium TCNQ salt as the semi-amphiphilic molecule and the octadecyl TCNQ as the amphiphilic one in the molecular ratio 1 to 2, are of high optical quality. Such films show a d.c. conductivity which is almost constant with variation in the number of layers, down to one bilayer. Preliminary results obtained by changing the nature of the counterion in the semi-amphiphilic molecule are in good agreement with those of the sulphonium TCNQ-octadecyl TCNQ⁰.     

Development of a 64 channel ultrasonic high frequency linear array imaging system

In order to improve the lateral resolution and extend the field of view of a previously reported 48 element 30 MHz ultrasound linear array and 16-channel digital imaging system, the development of a 256 element 30 MHz linear array and an ultrasound imaging system with increased channel count has been undertaken. This paper reports the design and testing of a 64 channel digital imaging system which consists of an analog front-end pulser/receiver, 64 channels of Time-Gain Compensation (TGC), 64 channels of high-speed digitizer as well as a beamformer. A Personal Computer (PC) is used as the user interface to display real-time images. This system is designed as a platform for the purpose of testing the performance of high frequency linear arrays that have been developed in house. Therefore conventional approaches were taken it its implementation. Flexibility and ease of use are of primary concern whereas consideration of cost-effectiveness and novelty in design are only secondary. Even so, there are many issues at higher frequencies but do not exist at lower frequencies need to be solved. The system provides 64 channels of excitation pulsers while receiving simultaneously at a 20–120 MHz sampling rate to 12-bits. The digitized data from all channels are first fed through Field Programmable Gate Arrays (FPGAs), and then stored in memories. These raw data are accessed by the beamforming processor to re-build the image or to be downloaded to the PC for further processing. The beamformer that applies delays to the echoes of each channel is implemented with the strategy that combines coarse (8.3 ns) and fine delays (2 ns). The coarse delays are integer multiples of the sampling clock rate and are achieved by controlling the write enable pin of the First-In-First-Out (FIFO) memory to obtain valid beamforming data. The fine delays are accomplished with interpolation filters. This system is capable of achieving a maximum frame rate of 50 frames per second. Wire phantom images acquired with this system show a spatial resolution of 146 μm (lateral) and 54 μm (axial). Images with excised rabbit and pig eyeball as well as mouse embryo were also acquired to demonstrate its imaging capability.     

Stabilisation thermique du PVC: Relation structure-efficacite mode d'action des stabilisants organostanniques

PVC thermal stabilization has been investigated with symmetrical dialkyltin or mixed methylaklytin di-(i-octylthioglycolate). Steric hindrance around the tin atom seems to play a key role; internal complexation carbonyl to tin may be considered as a nucleophilic assistance to the thioglycolate leaving group in the substitution of allylic chlorine in PVC resin.     

Ferric hydroxide supported gold subnano clusters or quantum dots: enhanced catalytic performance in chemoselective hydrogenation

An attempt to prepare ferric hydroxide supported Au subnano clusters via modified co-precipitation without any calcination was made. High resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) have been employed to study the structure and chemical states of these catalysts. No Au species could be observed in the HRTEM image nor from the XRD pattern, suggesting that the sizes of the Au species in and on the ferric hydroxide support were less than or around 1 nm. Chemoselective hydrogenation of aromatic nitro compounds and alpha,beta-unsaturated aldehydes was selected as a probe reaction to examine the catalytic properties of this catalyst. Under the same reaction conditions, such as 100 degrees C and 1 MPa H2 in the hydrogenation of aromatic nitro compounds, a 96-99% conversion (except for 4-nitrobenzonitrile) with 99% selectivity was obtained over the ferric hydroxide supported Au catalyst, and the TOF values were 2-6 times higher than that of the corresponding ferric oxide supported catalyst with 3-5 nm size Au particles. For further evaluation of this Au catalyst in the hydrogenation of citral and cinnamaldehyde, selectivity towards unsaturated alcohols was 2-20 times higher than that of the corresponding ferric oxide Au catalyst.