On Necessary Optimality Conditions with Higher-Order Complementarity Slackness for Set-Valued Optimization Problems

Set-Valued and Variational Analysis - We aim to establish Karush-Kuhn-Tucker multiplier rules involving higher-order complementarity slackness under Hölder metric subregularity. These rules...     

Synthesis of partially fluorinated poly(arylene ether sulfone) multiblock copolymers bearing perfluorosulfonic functions

Partially fluorinated poly(arylene ether sulfone) multiblock copolymers bearing perfluorosulfonic functions (ps‐PES‐FPES), with ionic exchange capacity (IEC) ranging between 0.9 and 1.5 meq H⁺/g, are synthesized by regioselective bromination of partially fluorinated poly(arylene ether sulfone) multiblock copolymers (PES‐FPES), followed by Ullman coupling reaction with lithium 1,1,2,2‐tetrafluoro‐2‐(1,1,2,2‐tetrafluoro‐2‐iodoethoxy)ethanesulfonate. The PES‐FPES are prepared by aromatic nucleophilic substitution reaction by an original approach, that is, “one pot two reactions synthesis.” The chemical structures of polymers are analyzed by ¹H and ¹⁹F NMR spectroscopy. The resulted ionomers present two distinct glass transitions and α relaxations revealing phase separation between the hydrophilic and the hydrophobic domains. The phase separation is observed at much lower block lengths of ps‐PES‐FPES as compared with the literature. AFM and SANS observations supported the phase separation, the hydrophilic domains are well dispersed but the connectivity to each other depends on the ps‐PES block lengths. The thermomechanical behavior, the water up‐take, and the conductivity of the ps‐PES‐FPES membranes are compared with those of Nafion 117^® and randomly functionalized polysulfone (ps‐PES). Conductivities close or higher to those of Nafion 117^® are obtained. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1941–1956     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

Motion of foam films in diverging-converging channels

Existing theories of the motion of foam films in capillaries often assimilate the pressure drop over the foam films to the static capillary pressure obtained from the Young-Laplace equation. Hence, they ignore the contribution of dynamic effects associated with the rapid stretching and contraction of the foam films to the overall viscous dissipation. This paper reports an investigation of the motion of foam films in axisymmetric diverging-converging channels, taking into account surface viscosity and elasticity. First, a phenomenological theory for the motion of the foam films is developed using simple physical arguments. We show that the displacement of the film obeys a nonlinear second-order differential equation, which can be solved numerically for the (dimensionless) distance from the inlet and the pressure drop as a function of time. Experiments with foam film motion, conducted using glass diverging-converging channels (minimum radius = 3.00 +/- 0,01 mm, maximum diameter = 7,98 +/- 0,01 mm) and nitrogen foam stabilized with sodium dodecyl sulfate (SDS) in brine, are discussed. For a single film motion in the diverging channel, we find that (a) the static pressure drop is a concave-upward function of distance and decreases from 1.0 to about 0.3, whereas (b) the dynamic pressure drop is concave downward and increases from 1 to a maximum of 1.3 and then decreases to 0.7. In the converging channel both the static and dynamic pressure drops are concave-downward functions, but the dynamic pressure drop values are always higher than the static ones. For two films the motions were found to be rather sensitive to the initial arrangement in the channel. The experiments are found to be in excellent agreement with the theoretical predictions. These observations imply that the large flow resistance obtained during foam flow in granular porous media, where converging-diverging channels are abundant, is largely due to the surface elasticity and viscosity of the films.     

Zur Synthese wasserfreier Ammonium-Seltenerdhalogenide

Preparation of Ammonium Rare Earth Halides totally free of Water Ammonium rare earth halides totally free of traces of water were prepared in an one step synthesis from metal, ammonium halide, and halogen in a two step temperature regime.     

Emploi des thiocarbohydrazones en analyse organique fonctionelle

Résumé Le thiocarbohydrazide est un réactif d'accès facile précipitant quantitativement les aldéhydes et quelques cétones. Les points de fusion sont nets. Les précipités formés se prêtent à la gravimétrie. Nous avons étudié avec la thermobalance leur domaine de stabilité et fourni la température à ne pas dépasser pour le séchage à poids constant.

---

Summary Thiocarbohydrazide is a readily available reagent which quantitatively precipitates aldehydes and some ketones. The melting points are sharp. The resulting precipitates are suitable for gravimetry. Their regions of stability have been investigated with the thermobalance and the temperatures which should not be exceeded in drying to a constant weight have been found.

---

Zusammenfassung Thiocarbohydrazid ist ein leicht zugängliches Reagens zur quantitativen Fällung der Aldehyde und mancher Ketone. Die Schmelzpunkte der Niederschläge sind scharf. Diese eignen sich zur gravimetrischen Auswertung. Ihre Stabilität wurde mit Hilfe der Thermowaage untersucht und die Höchsttemperaturen für ihre Trocknung bis zur Gewichtskonstanz bestimmt.

     

Comparison of efficiency calibration techniques of HPGe detector for radioactivity measurement of soil sample in Marinelli geometry

Journal of Radioanalytical and Nuclear Chemistry - To keep the accredited category for the gamma spectrometry test in our laboratory, the efficiency curves of a HPGe detector for soil sample in...     

Non-thermal Plasma Activated Water for Increasing Germination and Plant Growth of Lactuca sativa L

Plasma Chemistry and Plasma Processing - Non-thermal plasma is widely considered as an effective technology for applications in agriculture. Particularly, numerous reports studies have highlighted...     

Fast Li-Ion Conduction in Spinel-Structured Solids

Spinel-structured solids were studied to understand if fast Li⁺ ion conduction can be achieved with Li occupying multiple crystallographic sites of the structure to form a “Li-stuffed” spinel, and if the concept is applicable to prepare a high mixed electronic-ionic conductive, electrochemically active solid solution of the Li⁺ stuffed spinel with spinel-structured Li-ion battery electrodes. This could enable a single-phase fully solid electrode eliminating multi-phase interface incompatibility and impedance commonly observed in multi-phase solid electrolyte–cathode composites. Materials of composition Li_1.25M(III)_0.25TiO₄, M(III) = Cr or Al were prepared through solid-state methods. The room-temperature bulk Li⁺-ion conductivity is 1.63 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄. Addition of Li₃BO₃ (LBO) increases ionic and electronic conductivity reaching a bulk Li⁺ ion conductivity averaging 6.8 × 10⁻⁴ S cm⁻¹, a total Li-ion conductivity averaging 4.2 × 10⁻⁴ S cm⁻¹, and electronic conductivity averaging 3.8 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄ with 1 wt. % LBO. An electrochemically active solid solution of Li_1.25Cr_0.25Mn_1.5O₄ and LiNi_0.5Mn_1.5O₄ was prepared. This work proves that Li-stuffed spinels can achieve fast Li-ion conduction and that the concept is potentially useful to enable a single-phase fully solid electrode without interphase impedance.     

Electronic structures of NbGen−/0/+ (n = 1–3) clusters from multiconfigurational CASPT2 and density matrix renormalization group-CASPT2 calculations

Density functional theory and multiconfigurational CASPT2 and density matrix renormalization group DMRG-CASPT2 have been employed to study the low-lying states of NbGe_n^−/0/+ (n = 1–3) clusters. With the DMRG-CASPT2 method, the active spaces are extended to a size of 20 orbitals. For most of the states, the CASPT2 relative energies are comparable with the DMRG-CASPT2 results. The leading configuration, bond distances, vibrational frequencies, and relative energies of the low-lying states of these clusters were calculated. The ground states of these clusters were computed to be ³Δ, ⁴Φ, and ⁵Φ of NbGe^−/0/+; ³A₂, ⁴B₁, and ³B₁ of cyclic-NbGe₂^−/0/+; and ¹A′, 1²A″ and 1²A′′ (²E), and ³A″ of tetrahedral-NbGe₃^−/0/+ isomers. For NbGe cluster, our calculations proposed that the ⁶∑ is almost degenerate with the ⁴Φ with the CASPT2 and DMRG-CASPT2 relative energies of 0.05 and 0.06 eV. The adiabatic detachment energies of NbGe_n⁻ (n = 1–3) clusters were estimated to be 1.46, 1.55, and 2.18 eV by the CASPT2 method. The relevant detachment energies of the anionic ground state and the ionization energies of the neutral ground states are evaluated at the CASPT2 level.