Increased synthesis of ajmalicine and catharanthine by cell suspension cultures ofCatharanthus roseus in response to fungal culture-filtrates

The ammonium sulfate-precipitated fraction from mycelia and culture-filtrates and the crude, cell-free culture filtrates from the growth medium of the fungiChrysosporium palmorum, Eurotium rubrum, Micromucor isabellina, andPythium aphanidermatum when aseptically added to cell suspensions ofCantharanthus roseus caused a rapid and dramatic increase in indole alkaloid biosynthesis. Up to 400 μg/L ajmalicine and 600 μg/L catharanthine were detected in C.roseus cell suspension grown in the presence of theM. isabellina fungal culture filtrate for 3 d. Untreated cells produced only trace levels of ajmalicine and catharanthine per liter of cell suspension after 15 d of culture.     

Interface growth mechanism in ion beam sputtering-deposited Mo/Si multilayers

Despite the technological importance of metal/Si multilayer structures in microelectronics, the interface reactions occurring during their preparation are not yet fully understood. In this work, the interface intermixing in Mo/Si multilayer coatings has been studied with respect to their preparation conditions. Various samples, prepared at room temperature with different Mo deposition rates (0.06–0.43?Å?s^?1) and a constant Si rate, have been investigated by detailed TEM observations. Contrary to the Si-on-Mo interface where no evidence of chemical intermixing could be found, the Mo-on-Si interface presents a noticeable interface zone whose thickness was found to noticeably decrease (from 4.1 to 3.2?nm) when increasing the Mo deposition rate. Such intermixing phenomena correspond to diffusion mechanisms having coefficients ranging from 0.25?×?10^?15 to 1.2?×?10^?15?cm²?s^?1 at room temperature. By assuming a diffusion mechanism mainly driven by Mo–Si atomic exchanges to minimize the surface energy, the diffusion dependence with Mo deposition rate has been successfully simulated using a cellular automaton. A refined simulation including Mo cluster formation is also proposed to explain the scenario leading to the full crystallization of Mo layers.     

Computational Study of the Palladium‐Catalyzed Carbonylative Synthesis of Aromatic Acid Chlorides: The Synergistic Effect of PtBu3 and CO on Reductive Elimination

We describe herein computational studies on the unusual ability of Pd(PtBu₃)₂ to catalyze formation of highly reactive acid chlorides from aryl halides and carbon monoxide. These show a synergistic role of carbon monoxide in concert with the large cone angle PtBu₃ that dramatically lowers the barrier to reductive elimination. The tertiary structure of the phosphine is found to be critical in allowing CO association and the generation of a high energy, four coordinate (CO)(PR₃)Pd(COAr)Cl intermediate. The stability of this complex, and the barrier to elimination, is highly dependent upon phosphine structure, with the tertiary steric bulk of PtBu₃ favoring product formation over other ligands. These data suggest that even difficult reductive eliminations can be rapid with CO association and ligand manipulation. This study also represents the first detailed exploration of all the steps involved in palladium‐catalyzed carbonylation reactions with simple phosphine ligands, including the key rate‐determining steps and palladium(0) catalyst resting state in carbonylations.     

Achieving high circularly polarized luminescence with push–pull helicenic systems: from rationalized design to top-emission CP-OLED applications

While the development of chiral molecules displaying circularly polarized luminescence (CPL) has received considerable attention, the corresponding CPL intensity, g_lum, hardly exceeds 10⁻² at the molecular level owing to the difficulty in optimizing the key parameters governing such a luminescence process. To address this challenge, we report here the synthesis and chiroptical properties of a new family of π-helical push–pull systems based on carbo[6]helicene, where the latter acts as either a chiral electron acceptor or a donor unit. This comprehensive experimental and theoretical investigation shows that the magnitude and relative orientation of the electric (μ_e) and magnetic (μ_m) dipole transition moments can be tuned efficiently with regard to the molecular chiroptical properties, which results in high g_lum values, i.e. up to 3–4 × 10⁻². Our investigations revealed that the optimized mutual orientation of the electric and magnetic dipoles in the excited state is a crucial parameter to achieve intense helicene-mediated exciton coupling, which is a major contributor to the obtained strong CPL. Finally, top-emission CP-OLEDs were fabricated through vapor deposition, which afforded a promising g_El of around 8 × 10⁻³. These results bring about further molecular design guidelines to reach high CPL intensity and offer new insights into the development of innovative CP-OLED architectures.

A CPL intensity of up to 3 × 10⁻² is achieved in π-extended 6-helicene derivatives, owing to an intense helicene-mediated exciton coupling. Corresponding top-emission CP-OLEDs afforded a promising g_El of around 8 × 10⁻³.

The design of chiral emitters displaying intense circularly polarized luminescence (CPL) has attracted significant interest, thanks to the potential of CP light in a diverse range of applications going from chiroptoelectronics (organic light-emitting diodes (OLEDs), optical information processing, etc.) to bio-imaging and chiral sensing.¹ Recently, designing OLEDs with CP electroluminescence (CP-OLEDs) has emerged as an interesting approach to improve high-resolution display performance. Namely, using unpolarised OLEDs, up to 50% of the emitted light can be lost due to the use of antiglare polarized filters.² In CP-OLEDs, the electro-generated light can pass these filters with less attenuation owing to its circular polarization and thus lead to an increase of the image brightness with lower power consumption.³ To develop CP-OLED devices, the main approach relies on the doping of the device''s emitting layer by a CPL emitter, which should ensure simultaneously high exciton conversion and a high degree of circular polarization. The harvesting of both singlet and triplet excitons has been successfully addressed using either chiral phosphorescent materials or thermally activated delayed fluorescence (CP-TADF) emitters with device efficiencies of up to 32%.⁴ However, the intensity of circularly polarized electroluminescence (CPEL), evaluated by the corresponding dissymmetry factor g_El, remains inefficient and typically falls within the range of 10⁻³ with limited examples reaching g_El > 10⁻² based on polymeric materials and lanthanide complexes.⁵ For CP-OLEDs using a molecular chiral emissive dopant, g_El, defined as the ratio between the intensity difference of left- and right-CPEL, and the total generated electroluminescence, 2(El_L − El_R)/(El_L + El_R), can be generally related to the luminescence dissymmetry factor g_lum measured in diluted solution.² Accordingly, it is of crucial importance to design luminescent molecules with high g_lum values,^3,28a–d,29 in order to reach strong CP electro-luminescence when going to practical devices. However, structural and electronic factors that govern the CPL of chiral compounds are still poorly understood even if a few studies have recently tried to rationalize and establish molecular guidelines to obtain high g_lum values.⁶Our team has contributed to the research in this area by developing extended π-helical molecular architectures resulting from the association of carbo[6]helicene and achiral dyes,⁷ which afforded enhanced chiroptical properties, with notably a g_lum up to 10⁻², owing to an uncommon chiral exciton coupling process mediated by the chiral helicenic unit.⁸ In addition, we also described an unusual solvent effect on the intensity of CPL of π-helical push–pull helicene–naphthalimide derivatives,^7b which showed a decrease of g_lum from 10⁻² to 10⁻³ upon increasing the polarity of solvent.^7b This solvatochromism effect was shown to be related to a symmetry breaking of the chiral excited state before emission,⁹ which modifies the relative intensity of the magnetic (μ_m) and electric (μ_e) dipole transition moments, and the angle, θ, between them (Fig. 1), ultimately impacting g_lum. The latter is well approximated as 4|m|cos θ/(|μ|) for an electric dipole-allowed transition.¹⁰Open in a separate windowFig. 1Chemical structures of “push–pull” 2,15-diethynylhexahelicene-based emitters with their polarized luminescence characteristics including their calculated electric and magnetic transition dipole moments and the angle between them corresponding to the S₁ → S₀ transition.While these results highlight interesting aspects regarding the key parameters influencing the CPL of organic emitters, this type of “helical push–pull design” remains limited to only one example, which render the systematic rationalization of these findings difficult. Accordingly, we decided to develop a complete family of new chiral push–pull compounds to explore the structural and electronic impact of the grafted substituents on the helical π-conjugated system. In addition, we went a step further and incorporated the designed chiral emitter into proof-of-concept CP-OLEDs using a top-emission architecture,¹¹ which remains scarcely explored for CP-light generation despite its considerable potential for micro-display applications. To the best of our knowledge, only one example of such type of electroluminescent device has been reported, using a CP-TADF emitter, affording a modest g_El of 10⁻³.^11aHerein, we report the synthesis and chiroptical properties of a new family of π-helical push–pull systems based on chiral carbo[6]helicene, functionalized by either electron donor or acceptor units. Interestingly, the chiral π-conjugated system of the helicene may act as either an electron acceptor or a donor, depending on the nature of the attached substituents, thereby impacting the chiroptical properties, notably the resulting CPL. By optimizing the chiral exciton coupling process through the modulation of the magnitude and relative orientation of the electric (μ) and magnetic (m) dipoles, the chiroptical properties of classical carbo[6]helicene-based emitters can be dramatically enhanced and reach high g_lum values at the molecular level, i.e. up to 3–4 × 10⁻². Experimental and theoretical investigations revealed that the mutual orientation of the electric and magnetic dipoles in the excited-state is a crucial parameter and is optimal when the substituents attached to the helicene core possess a rather weak electron withdrawing or donating ability. Finally, proof of concept top-emission CP-OLEDs were fabricated through vapor deposition of π-helical push–pull derivatives and afforded a g_El of around 8 × 10⁻³, which represents a significant improvement for the polarization of electroluminescence emitted using this device architecture.     

Cerium(IV)-Catalyzed Deprotection of Acetals and Ketals under Mildly Basic Conditions

Smooth and quantitative deprotection of a wide range of acetals and ketals [Eq. (a); R, R(1)=alkyl, aryl, H] under neutral to mildly basic conditions was achieved with catalytic quantities of cerium ammonium nitrate (CAN). The reaction conditions are compatible with a variety of sensitive functional groups, and aldehydes can be liberated from acetals without being oxidized to the corresponding carboxylic acids.     

Effect of Young's modulus on the detachment force of 7 microm particles

The detachment force of ground, 7-microm-diameter polyester particles overcoated with clusters of silica having a cluster radius of approximately 100 nm from ceramer substrates with varying Young's moduli has been measured. It was found that the detachment force varied inversely with the Young's modulus of the ceramer. The results are attributed to the role of the silica, acting as asperities on the particles, and the degree of embedment of the particles into the substrate.     

Synthesis of PLA-b-PEG multiblock copolymers for stealth drug carrier preparation

An efficient method of preparing biodegradable and biocompatible multiblock copolymers from lactic acid and polyethylene glycol is proposed.